Sharp MX-M464N

Manuale utente della stampante laser monocromatica Sharp MX-M464N

Model: MX-M464N

1. Introduzione

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Sharp MX-M464N Monochrome Laser Multifunction Printer (MFP). Please read this manual thoroughly to ensure proper and safe use of the device. This unit is a refurbished product, tested and certified to function like new.

2. Prodotto finitoview

The Sharp MX-M464N is a versatile A3 monochrome laser MFP designed for medium workgroups, offering copy, print, and scan functionalities. It features a robust 800 MHz processor, PCL6/PCL5e support, and standard automatic duplexing.

Caratteristiche principali:

  • Print Speed: Up to 46 pages per minute (ppm) in black and white.
  • Functions: Copy, Print, Color Network Scan, E-mail.
  • Paper Handling: Standard 1,100-sheet capacity (expandable to 6,600 sheets), supports up to 11 x 17 inch (Ledger/Tabloid) paper size.
  • Duplexing: Automatic double-sided copying and printing.
  • Connectivity: Ethernet and High-Speed USB 2.0.
  • Memory & Storage: 3 GB RAM and 320 GB Hard Disk Drive.

Componenti del prodotto:

Sharp MX-M464N Multifunction Printer

Figura 2.1: Davanti view of the Sharp MX-M464N monochrome laser multifunction printer, showing the main unit with two paper trays and the automatic document feeder.

Sharp MX-M464N Multifunction Printer with Optional Finisher

Figura 2.2: Davanti view of the Sharp MX-M464N multifunction printer, illustrating the main unit with an attached optional finisher module on the right side, enhancing document handling capabilities.

3. Impostazione

3.1 Disimballaggio e posizionamento

  • Carefully remove the MFP from its packaging.
  • Place the unit on a sturdy, level surface with adequate ventilation. Ensure sufficient space around the device for operation and maintenance.
  • Remove all protective tapes and packing materials from the exterior and interior of the machine.

3.2 Collegamento di alimentazione

  • Connect the power cord securely to the MFP's power inlet and then to a grounded electrical outlet.
  • Do not use extension cords or power strips that are not rated for the MFP's power requirements.

3.3 Connessione di rete

  • For network printing and scanning, connect an Ethernet cable from the MFP's network port to your network router or switch.
  • Alternatively, for direct connection, use a High-Speed USB 2.0 cable to connect the MFP to a computer.

3.4 Caricamento iniziale della carta

  • Open the paper trays and load the desired paper size (e.g., A4, Letter, A3, Tabloid).
  • Regolare le guide della carta in modo che aderiscano perfettamente alla risma di carta.
  • Ensure the paper type and size settings on the control panel match the loaded paper.

4. Istruzioni per l'uso

4.1 Copia dei documenti

  1. Place your original document face-up in the Automatic Document Feeder (ADF) or face-down on the document glass.
  2. Nel pannello di controllo, selezionare la funzione "Copia".
  3. Adjust settings such as quantity, paper size, zoom, and duplex (two-sided) copying as needed.
  4. Premere il pulsante "Avvia" per iniziare la copia.

4.2 Stampa dei documenti

  1. Ensure the MFP is connected to your computer via USB or network.
  2. Install the appropriate print drivers on your computer (refer to the manufacturer's website for drivers).
  3. From your application, select 'Print' and choose the Sharp MX-M464N as your printer.
  4. Adjust print settings (e.g., paper size, duplex, number of copies) in the print dialog box.
  5. Click 'Print' to send the job to the MFP.

4.3 Scansione di documenti

  1. Place your original document in the ADF or on the document glass.
  2. Nel pannello di controllo, selezionare la funzione "Scansione".
  3. Scegli la destinazione della scansione (ad esempio, cartella di rete, e-mail, unità USB).
  4. Configure scan settings such as resolution, color mode (color network scan is supported), and file formato.
  5. Premere il pulsante "Avvia" per avviare la scansione.

5. Manutenzione

5.1 Sostituzione dei materiali di consumo

  • Cartuccia toner: Replace the toner cartridge when prompted by the control panel. Follow the instructions provided with the new cartridge.
  • Unità tamburo: The drum unit has a limited lifespan. Replace it when indicated by the MFP's display or when print quality degrades significantly.

5.2 Procedure di pulizia

  • Esterno: Wipe the exterior of the MFP with a soft, damppanno privo di lanugine. Non utilizzare detergenti abrasivi o solventi.
  • Lastra di esposizione: Clean the document glass and the underside of the ADF with a soft cloth and a non-abrasive glass cleaner to prevent streaks on scanned or copied documents.
  • Rulli di alimentazione della carta: Periodically clean the paper feed rollers in the trays to prevent paper jams. Refer to the on-screen instructions or service manual for detailed steps.

6. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti incontrare. Per problemi più complessi, contatta l'assistenza tecnica.

6.1 Inceppamenti della carta

  • Follow the instructions displayed on the MFP's control panel to locate and clear the jammed paper.
  • Ensure all paper trays are loaded correctly and paper guides are adjusted.
  • Use only recommended paper types and avoid overfilling trays.

6.2 Scarsa qualità di stampa

  • Check toner levels and replace the toner cartridge if low.
  • Inspect the drum unit for damage or wear.
  • Perform a print quality calibration from the MFP's settings menu.
  • Assicurati di utilizzare la carta adatta al tuo lavoro di stampa.

6.3 Problemi di connettività di rete

  • Verify that the Ethernet cable is securely connected to both the MFP and the network device.
  • Check network settings on the MFP's control panel to ensure it has a valid IP address.
  • Restart the MFP and your network router/switch.
  • Confirm that the correct printer drivers are installed and configured on your computer.

7. Specifiche

CaratteristicaSpecificazione
Nome del modelloMX M464N
Tecnologia di stampaLaser
Uscita della stampanteMonocromo
Velocità di stampa massima in bianco e nero46 ppm
Formato carta massimo11 x 17 inches (Ledger/Tabloid)
Paper Input Capacity (Standard)1,100 sheets (2 trays + bypass)
Paper Input Capacity (Maximum)6,600 fogli (con opzioni)
BifamiliareAutomatico
Tipo di scannerAlimentato a fogli (ADF)
Tecnologia di connettivitàEthernet, USB 2.0
Memoria3 GB
Unità disco rigido320 GB
Metodo di controlloRemote (via network)
Codice UPC748926450676
ASINB07JGPVDYD

8. Garanzia e supporto

8.1 Informazioni sulla garanzia

This Sharp MX-M464N MFP is a Certified Refurbished product and comes with a 90-day limited warranty. This warranty covers parts and ensures the product is tested and certified to look and work like new. For specific terms and conditions, please refer to the warranty documentation provided at the time of purchase.

8.2 Supporto tecnico

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller from whom you purchased this refurbished unit. The seller, ABD Office Solutions (via Amazon Renewed), can provide specialized support for your device.

Documenti correlati - MX-M464N

Preview Guida rapida Sharp MX-M6570/MX-M7570
Inizia subito a utilizzare il tuo sistema multifunzione digitale Sharp MX-M6570 o MX-M7570. Questa guida fornisce informazioni essenziali su configurazione, funzionamento e funzionalità chiave come copia, stampa, scansione e fax.
Preview Guida introduttiva Sharp Monochrome Advanced ed Essentials: serie MX-M
Inizia a utilizzare il tuo sistema digitale multifunzione monocromatico Sharp Advanced ed Essentials. Questa guida offre informazioni essenziali su configurazione, sicurezza e funzionamento per i modelli da MX-M2630 a MX-M6070.
Preview Guida alla risoluzione dei problemi della stampante multifunzione SHARP
Questa guida completa di SHARP fornisce soluzioni ai problemi più comuni riscontrati con le stampanti multifunzione, tra cui problemi di copia, stampa, fax, invio di immagini e archiviazione di documenti. Offre checklist dettagliate e istruzioni dettagliate per aiutare gli utenti a risolvere le sfide operative.
Preview Guida alla sicurezza del sistema multifunzione e della stampante Sharp
Guida alla sicurezza per i SISTEMI MULTIFUNZIONALI DIGITALI A COLORI e le STAMPANTI Sharp, nonché per i SISTEMI MULTIFUNZIONALI DIGITALI e le STAMPANTI LASER, che tratta di sicurezza elettrica, sicurezza laser, ambiente operativo e conformità alle normative.
Preview Guida alla sicurezza Sharp per sistemi e stampanti multifunzionali
Linee guida e precauzioni essenziali per la sicurezza dei sistemi e delle stampanti multifunzione digitali Sharp, inclusi i modelli MX-C357F, MX-C428F, MX-C557F, MX-C607F, MX-C407P, MX-C528P, MX-C607P, MX-B557F, MX-B707F, MX-B427W, MX-B467F, MX-B557P, MX-B707P, MX-B427PW, MX-B467P. Include informazioni sulla sicurezza elettrica, laser, dell'ozono e sulla conformità.
Preview Manuale utente del sistema multifunzione digitale a colori Sharp MX-3070N/MX-3570N/MX-4070N
Manuale utente per i sistemi multifunzione digitali a colori Sharp MX-3070N, MX-3570N e MX-4070N. Descrive installazione, funzionamento, manutenzione e caratteristiche.