DAYBETTER FLSL-R5132-RGB-US

DAYBETTER 32.8ft Waterproof LED Strip Lights Kit Instruction Manual

Model: FLSL-R5132-RGB-US

1. Prodotto finitoview

The DAYBETTER 32.8ft Waterproof LED Strip Lights Kit provides versatile and vibrant lighting for both indoor and outdoor environments. This kit includes two 16.4ft LED strips, a 44-key IR remote controller, and a 12V power supply, offering a wide range of color-changing options and effects.

DAYBETTER LED Strip Lights Kit components

Image 1.1: Complete DAYBETTER LED Strip Lights Kit, showing two rolls of LED strips, power adapter, IR receiver, and 44-key remote control.

2. Contenuto della confezione

  • 2 x 16.4ft (5m) Waterproof LED Strip Lights
  • 1 x 44-Key IR Remote Controller
  • 1 x IR Receiver Box
  • 1 alimentatore da 12 V
  • Manuale dell'utente (questo documento)

3. Configurazione e installazione

3.1 Preparazione

  • Assicurarsi che la superficie di installazione sia pulita, asciutta e liscia.
  • Unroll the LED strips completely before powering them on to prevent overheating.
  • Test the lights before final installation by connecting all components.

3.2 Schema di collegamento

Follow the diagram below to connect the LED strips to the IR receiver and power supply. Ensure the arrows on the connectors align correctly.

Diagram showing how to connect LED strips to IR receiver and power adapter

Image 3.1: Connection steps for the LED strip lights, IR receiver, and power adapter. Note the arrow-to-arrow alignment for proper connection.

  1. Connect the two LED strip rolls to the IR receiver box. Ensure the arrows on the connectors are aligned.
  2. Connect the 12V power supply to the IR receiver box.
  3. Collegare l'alimentatore a una presa elettrica standard.

3.3 Mounting the LED Strips

The LED strips feature a strong self-adhesive backing for easy mounting.

Close-up of LED strip showing self-adhesive backing

Image 3.2: Detail of the LED strip's self-adhesive backing, designed for easy and secure mounting.

  1. Peel off the protective film from the adhesive backing of the LED strip.
  2. Carefully press the strip onto the desired clean and dry surface. Apply firm pressure for a few seconds to ensure good adhesion.
  3. The strips are cuttable at designated marks (usually indicated by a scissor icon or copper pads) to fit specific lengths. Ensure to cut only at these marks to avoid damaging the circuit.

4. Operating Instructions (44-Key IR Remote)

The included 44-key IR remote controller allows for full control over the LED strip lights. Ensure the remote is pointed towards the IR receiver box for optimal functionality.

44-key IR remote controller for LED strip lights

Image 4.1: The 44-key IR remote control, used to manage colors, brightness, and lighting modes of the LED strips.

4.1 Funzioni di base

  • ACCESO/SPENTO: Pulsante di accensione per accendere o spegnere le luci.
  • Controllo della luminosità: Utilizzare il E pulsanti per regolare la luminosità.
  • Selezione del colore: Choose from 20 preset static colors using the color buttons.
  • Colori fai da te: Use the DIY buttons (DIY1-DIY6) to create and save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color. Press the DIY button again to save.

4.2 modalità dinamiche

  • VELOCE: Salta tra 7 colori.
  • STROBO: Fades in and out of one color.
  • DISSOLVENZA: Fades between 7 colors.
  • LISCIO: Fades between red, green, and blue.
  • SALTO3/SALTO7: Jumps between 3 or 7 colors.
  • DISSOLVENZA3/DISSVOLGIMENTO7: Sfuma tra 3 e 7 colori.

5. Manutenzione e cura

  • Pulizia: Gently wipe the LED strips with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Impermeabilizzazione: The LED strips are waterproof (resin material). However, the power supply and IR receiver box are non waterproof. Ensure these components are protected from moisture and direct water exposure.
Diagram showing non-waterproof power supply and IR receiver

Image 5.1: Illustration indicating that the power adapter and IR receiver are not waterproof and should be protected from water.

  • Magazzinaggio: If storing the lights for an extended period, disconnect them from power and store them in a cool, dry place.

6. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Le luci non si accendono.
  • Alimentatore non collegato o difettoso.
  • IR receiver not connected correctly.
  • LED strip connection is loose or incorrect (arrows not aligned).
  • Controllare tutti i collegamenti di alimentazione.
  • Ensure the IR receiver is securely connected to the power supply and LED strips.
  • Verify that the arrows on the LED strip connectors align with the arrows on the IR receiver.
Telecomando non funzionante.
  • La batteria è scarica o inserita in modo errato.
  • Remote is not pointed at the IR receiver.
  • Ostruzione tra telecomando e ricevitore.
  • Replace the battery or check its orientation.
  • Point the remote directly at the IR receiver.
  • Remove any objects blocking the line of sight to the receiver.
Colors are inconsistent or incorrect.
  • LED strip connection is incorrect.
  • Segmento LED danneggiato.
  • Double-check all connections, especially arrow alignment.
  • If a segment is damaged, it may need to be cut out and reconnected if possible, or the strip replaced.
LED strips fall off the surface.
  • La superficie non era pulita o liscia.
  • Pressione insufficiente applicata durante l'installazione.
  • Extreme temperature changes.
  • Pulire accuratamente la superficie prima di riapplicarla.
  • Durante l'installazione, esercitare una pressione decisa e uniforme su tutta la striscia.
  • Consider using additional mounting clips or stronger adhesive for challenging surfaces or environments.

7. Specifiche

CaratteristicaDettaglio
Numero di modelloFLSL-R5132-RGB-US
Lunghezza totale32.8 ft (2 Rolls of 16.4 ft)
Quantità LED300 LEDs (150 LEDs per roll)
Colore chiaroMulticolor (RGB) and White
Grado di impermeabilitàLED Strips: Waterproof (Resin material)
Uso interno/esternoOutdoor (Strips only, power supply/receiver must be protected)
Fonte di alimentazioneElettrico con cavo
Voltage12 Volt
Cosatage36 watt
Tipo di controllore44-Key IR Remote Control
Caratteristiche specialiWaterproof, Color Changing, Remote Controlled, Cuttable

8. Garanzia e supporto

For warranty information or technical support, please refer to the product packaging or contact DAYBETTER customer service directly. Keep your purchase receipt for any warranty claims.

Documenti correlati - FLSL-R5132-RGB-US

Preview Manuale di istruzioni per l'utente delle luci per tende intelligenti
Manuale di istruzioni per l'utente delle luci Smart Curtain (modello T021) di SHENZHEN DAYBETTER OPTO-ELECTRONICS CO.,LTD. Include guida all'installazione, funzioni di controllo remoto, associazione tramite app e risoluzione dei problemi.
Preview Strisce luminose a LED bianche DAYBETTER: guida all'installazione, al funzionamento e alla sicurezza
Una guida completa per le strisce luminose a LED bianche DAYBETTER, che descrive in dettaglio il contenuto della confezione, l'installazione passo dopo passo, le funzioni del telecomando RF, le funzioni di controllo touch, le istruzioni di associazione, i suggerimenti per la sicurezza e le informazioni di contatto per l'assistenza.
Preview User Manual: DayBetter Wi-Fi LED Strip Lights RGB Smart IC
This user manual provides instructions for setting up, installing, and controlling DayBetter Wi-Fi LED Strip Lights (RGB Smart IC) via the DayBetter app, Alexa, and Google Home. It includes safety tips, troubleshooting, and FCC compliance information.
Preview Manuale utente delle strisce luminose LED Bluetooth DayBetter
Manuale utente per le strisce LED Bluetooth DayBetter, che illustra connessione, installazione, controllo tramite app, risoluzione dei problemi e precauzioni di sicurezza. Include informazioni sulla conformità FCC.
Preview DayBetter RGB+IC+CW Night Lamp Manuale d'uso
User manual for the DayBetter RGB+IC+CW Night Lamp, detailing setup, app control, features like dynamic lighting, music sync, and troubleshooting. Includes product specifications and FCC compliance information.
Preview DayBetter WiFi Smart Plug User Manual - T015
User manual for the DayBetter T015 WiFi Smart Plug. Learn how to set up, control your appliances remotely via the DayBetter app, integrate with Alexa and Google Home, and find troubleshooting tips.