1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of the Fortin EVO-AUDT1 Stand-Alone Add-On Remote Start Car Starter System. This system is designed to provide convenient remote engine starting capabilities for compatible Audi Key-Port Vehicles. Please read this manual thoroughly before attempting any installation or operation to ensure proper functionality and safety.
2. Prodotto finitoview
The Fortin EVO-AUDT1 is an all-in-one universal data bypass and interface module preloaded for specific Audi vehicles. It integrates seamlessly with your vehicle's existing electronics to enable remote start functionality using your original factory key fob.
Image: The Fortin EVO-AUDT1 system includes the main module and a preloaded T-Harness for simplified installation, shown here with its retail packaging.
3. Informazioni sulla sicurezza
- Always ensure the vehicle is in Park (P) or Neutral (N) with the parking brake engaged before attempting remote start.
- Do not remote start the vehicle in an enclosed area such as a garage, as exhaust fumes can be dangerous.
- Tenere mani e vestiti lontani dalle parti in movimento del motore quando questo è in funzione.
- Installation should only be performed by qualified technicians to prevent damage to the vehicle's electrical system.
- Prima di iniziare l'installazione, scollegare la batteria del veicolo per evitare cortocircuiti.
4. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Fortin EVO-AUDT1 Module
- Preloaded T-Harness for Audi Key-Port Vehicles
- Guida all'installazione (questo documento)
5. Configurazione e installazione
Professional installation is highly recommended for this product due to the complexity of vehicle electrical systems. Incorrect installation can lead to vehicle damage or system malfunction.
5.1 Passaggi di pre-installazione
- Compatibilità del veicolo: Confirm your Audi vehicle's year, make, and model are compatible with the EVO-AUDT1 system. Refer to the Fortin website for the most up-to-date compatibility list.
- Programmazione del modulo: The EVO-AUDT1 module comes preloaded. However, it may require specific programming or firmware updates using a Fortin Flash Link Updater (sold separately) to match your exact vehicle's specifications. Connect the module to a computer with internet access and use the Fortin software to ensure the latest firmware is installed and configured correctly for your vehicle.
- Raccogli strumenti: Ensure you have all necessary tools, including wire strippers, electrical tape, zip ties, and a multimeter.
5.2 Installazione fisica
- Scollegare la batteria: Scollegare il terminale negativo della batteria del veicolo.
- Access Ignition Harness: Locate and access the vehicle's ignition harness, typically found behind the steering column or dashboard.
- Collegare il cablaggio a T: Connect the provided T-Harness to the vehicle's ignition harness. The T-Harness is designed for a plug-and-play connection, minimizing the need for wire cutting or splicing. Ensure all connections are secure.
- Modulo di connessione: Plug the EVO-AUDT1 module into the T-Harness.
- Cablaggio sicuro: Route and secure all wiring away from moving parts, heat sources, and sharp edges using zip ties.
- Ricollegare la batteria: Ricollegare la batteria del veicolo.
5.3 Module Initialization/Programming (In-Vehicle)
After physical installation, the module needs to be initialized with the vehicle. The exact steps may vary slightly depending on your vehicle model and the module's firmware version. Typically, this involves a sequence of key turns and button presses. Refer to the specific vehicle guide available on the Fortin website for precise instructions for your Audi model.
General Initialization Sequence (Example - refer to specific guide for your vehicle):
- Insert the vehicle's key into the ignition.
- Turn the ignition to the ON position (do not start the engine).
- Observe the LED indicators on the Fortin module for specific flashing patterns.
- Follow the prompts (e.g., turn key OFF, open/close door, press brake pedal) as indicated by the module's LED feedback or the specific vehicle guide.
- Once initialization is complete, the module's LED will typically show a solid green or blue light.
6. Istruzioni per l'uso
The Fortin EVO-AUDT1 system utilizes your vehicle's original factory key fob for remote start functionality.
6.1 Remote Starting the Vehicle
To remote start your Audi vehicle:
- Ensure the vehicle is locked and all doors, hood, and trunk are closed.
- Press the LOCK button on your factory key fob three (3) times consecutively within 3 seconds.
- The vehicle's parking lights will flash, and the engine will start after a short delay.
- The engine will run for a preset duration (typically 15 minutes) or until the remote start is cancelled.
6.2 Cancelling Remote Start
To cancel a remote start session:
- Press the LOCK button on your factory key fob three (3) times consecutively within 3 seconds while the engine is running via remote start.
- Alternatively, unlock the vehicle using the key fob, open any door, or turn the ignition to the ON position.
6.3 Entering the Vehicle After Remote Start
To enter and drive the vehicle after a remote start:
- Unlock the vehicle using your factory key fob.
- Enter the vehicle. Do NOT press the brake pedal until the key is in the ignition and turned to the ON position.
- Insert the key into the ignition and turn it to the ON/RUN position.
- Press the brake pedal. The remote start will disengage, and the vehicle will transfer to normal key operation.
7. Manutenzione
The Fortin EVO-AUDT1 module is designed to be maintenance-free. However, consider the following:
- Ensure the module and wiring remain securely mounted and free from moisture or excessive heat.
- Avoid exposing the module to extreme temperatures or direct water contact.
- Non tentare di aprire o modificare il modulo, poiché ciò invaliderebbe la garanzia.
8. Risoluzione Dei Problemi
If you experience issues with your Fortin EVO-AUDT1 system, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'avvio remoto non si attiva. | Doors, hood, or trunk are open; vehicle not in Park; low battery; incorrect key fob sequence; module not properly initialized. | Ensure all vehicle entry points are closed and locked. Verify vehicle is in Park. Check vehicle battery. Re-attempt key fob sequence. Re-initialize module if necessary. |
| Engine starts but immediately shuts down. | Brake pedal pressed; door opened before key inserted; module programming issue; vehicle security system interference. | Ensure brake pedal is not pressed until key is in ignition. Follow proper entry sequence. Verify module programming is correct for your vehicle. Consult a professional installer. |
| Module LEDs are not active. | No power to module; loose connection; faulty module. | Check all wiring connections. Verify power supply to the module. If problem persists, contact Fortin support. |
For advanced troubleshooting or issues not covered here, please contact Fortin technical support or a certified installer.
9. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Produttore | Forte |
| Marca | Forte |
| Peso dell'articolo | 12.6 once |
| Dimensioni del pacco | 6.14 x 6.1 x 2.87 pollici |
| Numero modello articolo | EVO-AUDT1 |
| Numero di parte del produttore | EVO-AUDT1 |
| ASIN | B07KCVBQGD |
| Data prima disponibilità | 9 novembre 2018 |
10. Garanzia e supporto
Fortin products are covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty information provided with your product or visit the official Fortin websito.
For technical support, installation assistance, or warranty claims, please contact Fortin directly:
- Forte Websito: www.fortin.ca
- Fare riferimento al websito per informazioni di contatto, FAQ e risorse aggiuntive.
