Eaton 9SX 3000VA 2700W 120V Online Double-Conversion UPS User Manual

1. Introduzione

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Eaton 9SX 3000VA 2700W 120V Online Double-Conversion Uninterruptible Power Supply (UPS). The 9SX series is designed to deliver high-quality, continuous power protection for critical IT applications, medical equipment, light industrial systems, and automation.

The Eaton 9SX UPS ensures perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC. This double-conversion technology provides superior protection against power disturbances, including surges, sags, and outages, with zero transfer time to battery mode.

2. Informazioni sulla sicurezza

WARNING: Before installing or operating the UPS, read and understand all instructions in this manual. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Assicurarsi che l'UPS sia collegato a una presa elettrica correttamente messa a terra.
• Do not open the UPS enclosure. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Evitare di installare l'UPS in aree con polvere eccessiva, umidità o temperature estreme.
• Do not block ventilation openings. Adequate airflow is essential for proper cooling.
• Disconnect the UPS from the AC power source before performing any maintenance or moving the unit.

3. Prodotto finitoview

The Eaton 9SX 3000VA UPS is a robust power protection solution featuring advanced online double-conversion technology. It provides continuous, clean sine wave power to connected equipment, safeguarding against a wide range of power quality issues.

Figura 1: Fronte view of the Eaton 9SX 3000VA UPS, showing the display panel and ventilation grille.

Caratteristiche principali:

• Online Double-Conversion: Provides the highest level of power protection by continuously converting AC to DC and back to AC, isolating connected equipment from raw utility power.
• Uscita onda sinusoidale pura: Ensures compatibility with all types of sensitive electronic equipment.
• Zero Transfer Time: Seamless transition to battery power during outages, preventing interruptions.
• Advanced Battery Management (ABM) Technology: Extends battery service life by 50% and provides advanced warning for battery replacement.
• Tempo di esecuzione espandibile: Supports connection of up to four external battery modules (9SXEBM96, sold separately) for extended backup duration.
• Cybersecure Network Card Option: The optional NETWORK-M2 card (sold separately) enables remote monitoring, configuration, and management, meeting UL 2900-1 and IEC 62443-4-2 cybersecurity standards.
• Flexible Output Connections: Includes 4 NEMA 5-20R outlets and 1 NEMA L5-30R outlet.

4. Impostazione

4.1 Disimballaggio e ispezione

• Disimballare con cura l'UPS e i suoi accessori.
• Ispezionare l'unità per verificare la presenza di eventuali danni causati dal trasporto. In caso contrario, non installarla e contattare il rivenditore.
• Conservare l'imballaggio per eventuali trasporti o immagazzinamenti futuri.

4.2 Posizionamento

• Posizionare l'UPS in un luogo pulito, asciutto e ben ventilato.
• Ensure ambient temperature is within the specified operating range (typically 0°C to 40°C / 32°F to 104°F).
• Maintain adequate clearance around the UPS for proper airflow, especially around the front and rear ventilation grilles.

4.3 Collegamento all'alimentazione

1. Connect the UPS input power cord (NEMA L5-30P) to a dedicated, grounded electrical outlet.
2. Assicurare il volume di inputtage matches the UPS specifications (120V AC).

4.4 Apparecchiatura di collegamento

1. Connect your critical equipment to the UPS output receptacles. The UPS provides 4 NEMA 5-20R outlets and 1 NEMA L5-30R outlet.
2. Distribute the load evenly across the outlets if possible.
3. For optional remote management, install the NETWORK-M2 card (sold separately) into the expansion port and connect it to your network.

5. Istruzioni per l'uso

5.1 Avvio iniziale

1. After connecting the input power and equipment, press and hold the power button on the front panel for a few seconds until the UPS powers on.
2. The LCD display will illuminate and show system status, including input/output voltage, load level, and battery charge.
3. Allow the UPS to charge its internal batteries for at least 24 hours before relying on it for full runtime.

5.2 Comprensione del display

The front panel LCD provides real-time operational data. Use the navigation buttons (Up/Down arrows, Enter, Esc) to cycle through various screens and access settings.

• Ingresso/Uscita Voltage: Visualizza il volume CA correntetage.
• Livello di carico: Mostra la percentualetage della capacità dell'UPS utilizzata dalle apparecchiature collegate.
• Carica della batteria: Indica il livello di carica attuale delle batterie interne.
• Durata stimata: Provides an approximation of how long the UPS can power connected equipment during an outage.
• Registro eventi: Records system events and alarms.

5.3 Potenza in uscitatage Operazione

Durante un'interruzione di correntetage, the UPS will automatically switch to battery power with zero transfer time. The LCD will indicate battery operation, and an audible alarm may sound (configurable).

• Monitor the estimated runtime on the LCD.
• Se il outage is prolonged, safely shut down connected equipment before the UPS batteries are depleted.
• The UPS will automatically restart when utility power is restored (if configured to do so).

6. Manutenzione

6.1 Manutenzione e sostituzione della batteria

The Eaton 9SX UPS features field-replaceable, hot-swappable internal battery modules. This allows for battery replacement without powering down connected equipment.

• Durata della batteria: With ABM technology, batteries typically last longer, but regular checks are recommended. The UPS will provide advanced notice when batteries need replacing.
• Procedura di sostituzione: Refer to the detailed battery replacement guide available on the Eaton support website or contact qualified service personnel. Always use genuine Eaton replacement battery modules.
• Disposizione: Smaltire le batterie usate secondo le normative locali.

6.2 Pulizia generale

• Keep the UPS exterior clean and free of dust. Use a soft, dry cloth.
• Assicurarsi che le aperture di ventilazione siano libere da ostruzioni.

7. Risoluzione Dei Problemi

This section provides solutions to common issues. For more complex problems, contact Eaton technical support.

8. Specifiche

9. Garanzia e supporto

Eaton provides comprehensive warranty coverage for its UPS products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Eaton websito.

For technical assistance, troubleshooting, or service requests, please contact Eaton customer support. Have your model number (9SX3000) and serial number ready when contacting support.

Online resources, including FAQs, detailed manuals, and software downloads, are available on the Eaton websito.