Y&H 60A PWM Solar Charge Controller User Manual

1. Introduzione

This manual provides essential information for the safe and efficient operation of your Y&H 60A PWM Solar Charge Controller. Please read these instructions carefully before installation and use to ensure optimal performance and longevity of the product.

2. Istruzioni di sicurezza

• Assicurarsi che la batteria abbia una carica sufficientetage affinché il controller riconosca il tipo di batteria prima della prima installazione.
• Il cavo della batteria deve essere il più corto possibile per ridurre al minimo le perdite.
• The regulator is only suitable for lead-acid batteries (OPEN, AGM, GEL). It is not suitable for nickel metal hydride, lithium-ion, or other batteries.
• Il regolatore di carica è adatto solo per la regolazione dei moduli solari. Non collegare mai un'altra fonte di carica al regolatore di carica.

3. Caratteristiche del prodotto

• Built-in industrial micro-controller.
• Large LCD display with adjustable parameters for float charge voltage, volume bassotage discharge, low resistance, and load timer.
• Dual USB output (5V/2A) for charging mobile devices.
• Fully automatic PWM charge management.
• Multiple protection functions: power-off memory, over-heat, low voltage discharge, short circuit, open circuit, overload, and overcharge protection.
• MOSFET reverse current protection, low heat production.

4. Configurazione e installazione

Follow these steps for proper connection of the solar charge controller:

1. Connect the battery to the charge regulator (plus and minus).
2. Connect the photovoltaic module to the regulator (plus and minus).
3. Connect the consumer to the charge regulator (plus and minus).

Important: Reverse order applies when uninstalling!

An improper sequence can damage the controller!

Figure 4.1: Connection diagram for the Y&H 60A Solar Charge Controller.

5. Istruzioni per l'uso

5.1. LCD Display and Key Functions

The large LCD screen displays all parameters. The controller features three buttons for navigation and settings:

• Pulsante MENU: Short press to switch between different display interfaces. Long press for 3 seconds to enter the settings page.
• Pulsante SU: Premere per aumentare i valori.
• Pulsante GI: Premere per diminuire i valori.

The display shows various parameters including battery voltage, solar panel charging status, load status, accumulated charge/discharge ampere-hours, ambient temperature, and load mode.

Figure 5.1: LCD display interfaces and parameter adjustment flow.

5.2. Impostazioni dei parametri

Per regolare i parametri:

1. Long press the MENU button for 3 seconds to enter the settings page.
2. Use the UP/DOWN buttons to adjust the desired value.
3. Long press the MENU button again to save the setting and exit.

Parameters that can be adjusted include float charge voltage, volume bassotage disconnetti, basso volumetage reconnect, and load timer settings.

5.3. Dual USB Output

The controller is equipped with dual 5V/2A USB ports, allowing for convenient charging of mobile phones, tablets, and other USB-powered devices.

Figure 5.3: Charging a smartphone using the controller's dual USB ports.

6. Manutenzione

To ensure the long-term performance and reliability of your solar charge controller, regular maintenance is recommended:

• Mantenere il controller pulito e libero da polvere e detriti.
• Controllare periodicamente tutti i collegamenti dei cavi per accertarsi che siano saldi e privi di corrosione.
• Assicurare un'adeguata ventilazione attorno al controller per evitare il surriscaldamento.

7. Risoluzione Dei Problemi

Per i problemi più comuni e le relative soluzioni, fare riferimento alla tabella sottostante:

8. Specifiche

9. Garanzia e supporto

For warranty information or technical support, please contact the manufacturer, Shenzhen Yonghui Fashion Co., Ltd, or refer to the product's purchase platform for specific details.