1. Introduzione
The HENDI Automatic Water Softener, Model 230459, is an advanced system designed for commercial use to effectively prevent limescale buildup in plumbing installations. This unit operates at 230V and 18W, ensuring efficient and reliable water treatment. By reducing mineral deposits, it helps extend the lifespan of your appliances and maintain optimal water flow.
Figura 1: Fronte view of the HENDI Automatic Water Softener, Model 230459.
2. Informazioni sulla sicurezza
This is a commercial product not intended for domestic use.
Always adhere to local regulations and safety standards during installation, operation, and maintenance. Disconnect power before performing any service or maintenance. Ensure proper grounding to prevent electrical hazards. Keep the unit away from direct sunlight and extreme temperatures.
3. Caratteristiche del prodotto
- Pressione di esercizio: 1.5 - 6.0 bar
- Temperatura ambiente di esercizio: Temperatura: da 5 a 38 °C
- Output for 10°dH: 1200 litri
- Pannello di controllo: Allows configuration of operating time, regeneration time, and treated water quantity.
- Blocco automatico: Prevents unauthorized access to settings.
- Blocco bambini: Special function to prevent accidental changes.
4. Configurazione e installazione
The HENDI Automatic Water Softener is designed for installation on the main water line. It should be installed before the water line splits to the water heater or other plumbing fixtures to ensure all water entering the system is treated.
- Selezione della posizione: Choose a dry, level area with adequate space for installation and future access. Ensure the ambient temperature remains within 5 – 38 °C.
- Collegamento alla rete idrica: Connect the unit to the main water supply line. Ensure all connections are secure and leak-free.
- Collegamento di scarico: Connect the drain line according to local plumbing codes.
- Collegamento elettrico: Connect the unit to a grounded 230V electrical outlet.
- Avvio iniziale: Follow the operating instructions to initiate the first regeneration cycle and configure settings.
Note on Iron Content: If your source water has iron levels exceeding 0.3 ppm, it is recommended to use an iron removal filter before the water softener to ensure optimal performance and longevity of the unit.
5. Istruzioni per l'uso
The unit features an intuitive control panel for managing its functions. Refer to the display and buttons for configuration.
Figure 2: Close-up of the control panel with display and buttons.
- Setting Operating Time: Use the control panel to set the desired operating schedule for the unit.
- Configuring Regeneration Time: Adjust the regeneration cycle frequency and duration based on your water hardness and usage.
- Adjusting Treated Water Quantity: Set the volume of water to be treated before a regeneration cycle is initiated.
- Blocco automatico: The system includes an automatic lock feature to prevent unintended changes to the settings. Consult the on-screen prompts for activation/deactivation.
- Blocco bambini: Activate the child lock function through the control panel to secure settings from accidental tampring.
6. Manutenzione
The HENDI Automatic Water Softener Model 230459 is designed for minimal maintenance after initial setup. Regular checks are recommended to ensure optimal performance.
- Ispezione periodica: Visually inspect the unit and connections for any signs of leaks or damage.
- Pulizia: Mantenere l'esterno dell'unità pulito e libero da polvere e detriti. Utilizzare un panno morbido eamp cloth for cleaning. Do not use abrasive cleaners.
- Livello di sale: This unit operates using an ion exchange method, which typically requires salt for regeneration. Ensure the salt reservoir is adequately filled. Refer to the control panel for indicators and specific instructions on salt replenishment.
7. Risoluzione Dei Problemi
If you encounter issues with your HENDI Automatic Water Softener, please refer to the following common troubleshooting steps:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'unità non si accende | Nessuna alimentazione; collegamento allentato | Check power cable and outlet. Ensure unit is properly plugged in. |
| Water still hard | Incorrect settings; low salt level; high iron content; unit malfunction | Verify control panel settings. Check and refill salt reservoir. Test water for iron levels and consider a pre-filter if needed. Contact support if problem persists. |
| Messaggio di errore sul display | Internal fault; sensor issue | Annotare il codice di errore e consultare il manuale completo del prodotto oppure contattare l'assistenza clienti. |
For issues not listed here, or if solutions do not resolve the problem, please contact HENDI customer support.
8. Specifiche
| Attributo | Dettaglio |
|---|---|
| Produttore | HENDI |
| Numero di modello | 230459 |
| Dimensioni del prodotto | 56 x 42 x 24.5 cm (22 x 16.5 x 9.6 pollici) |
| Peso | 9.94 kg (21.9 libbre) |
| Voltage | 230 Volt |
| Consumo energetico | 18 Watt |
| Pressione di esercizio | 1.5 - 6.0 bar |
| Temperatura ambiente di esercizio | Temperatura: da 5 a 38 °C |
| Portata | 5 litri al minuto |
| Capacity (10°dH) | 1200 litri |
| Materiale | Ceramica |
| Metodo di installazione | Libera installazione |
| Metodo di purificazione | Scambio ionico |
| Caratteristiche speciali | Blocco bambini |
9. Informazioni sulla garanzia
HENDI products are manufactured to high-quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official HENDI websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.
10. Supporto
For technical assistance, spare parts, or further inquiries regarding your HENDI Automatic Water Softener, please contact HENDI customer service. Contact details can be found on the HENDI websito o nella documentazione fornita con il prodotto.
HENDI Websito: www.hendi.eu
