Manuale utente della sveglia a LED Karlsson KA5805WD

1. Prodotto finitoview

The Karlsson KA5805WD is a modern, hexagonal LED alarm clock designed to display time, day, date, and temperature. Its minimalist design allows it to be placed on a table or mounted on a wall. The clock features touch and sound activation for display control.

Figura 1: Fronte view of the Karlsson KA5805WD LED Alarm Clock, showing the digital display for time, day, date, and temperature.

2. Impostazione

2.1 Disimballaggio

Carefully remove the alarm clock from its packaging. Ensure all components are present: the Karlsson KA5805WD LED Alarm Clock and a USB power cable. Batteries are not included and must be purchased separately.

2.2 Alimentazione del dispositivo

La sveglia può essere alimentata in due modi:

1. Potenza della batteria: Open the battery compartment located on the back of the clock. Insert 3x AA batteries (not included), ensuring correct polarity (+/-). Battery power enables motion/sound activation and allows the clock to be portable. Note that battery life may vary depending on usage.
2. Alimentazione USB: Connect the provided USB cable to the DC 5V input port on the back of the clock. Plug the other end into a compatible USB power adapter (not included) or a powered USB port. Using USB power keeps the display continuously lit.

Figura 2: Posteriore view of the alarm clock, highlighting the control buttons (MODE, UP, DOWN, ALARM) and the battery compartment.

3. Istruzioni per l'uso

The control buttons (MODE, UP, DOWN, ALARM) are located on the back of the unit (refer to Figure 2).

3.1 Impostazione di data e ora

1. Premere il tasto MODALITÀ button to cycle through display modes (Time, Date, Temperature).
2. Per impostare l'ora, tenere premuto il tasto MODALITÀ finché le cifre dell'ora non lampeggiano.
3. Utilizzare il UP E GIÙ pulsanti per regolare l'ora.
4. Premere MODALITÀ di nuovo per passare ai minuti, quindi regolare con UP E GIÙ.
5. Continua a premere MODALITÀ to set the year, month, and day in a similar manner.
6. Premere MODALITÀ un'ultima volta per uscire dalla modalità di impostazione.

3.2 Impostazione dell'allarme

1. Premere il tasto ALLARME pulsante una volta per view l'ora corrente della sveglia.
2. Premere e tenere premuto il tasto ALLARME finché le cifre dell'ora della sveglia non lampeggiano.
3. Utilizzare il UP E GIÙ pulsanti per impostare l'ora desiderata per la sveglia.
4. Premere ALLARME di nuovo per impostare i minuti della sveglia, quindi regolare con UP E GIÙ.
5. Premere ALLARME one last time to confirm and exit.
6. Per attivare/disattivare l'allarme, premere il tasto ALLARME button briefly when the alarm time is displayed. An indicator (e.g., a small dot or icon) will appear on the display when the alarm is active.

3.3 Visualizzazione della temperatura

The clock automatically displays the ambient temperature. The unit of temperature (Celsius or Fahrenheit) can typically be switched by pressing the GIÙ button during normal time display, though this may vary by firmware version.

3.4 Sound and Touch Activation

When operating on battery power, the display can be set to turn off automatically to conserve energy. To activate the display, simply touch the clock or make a sound (e.g., clap your hands) near it. The display will illuminate for a few seconds before turning off again.

4. Manutenzione

4.1 Pulizia

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

4.2 Sostituzione della batteria

When the display dims or the clock functions become erratic while on battery power, it is time to replace the batteries. Open the battery compartment, remove the old AA batteries, and insert new ones, ensuring correct polarity. Dispose of old batteries responsibly according to local regulations.

5. Risoluzione Dei Problemi

• Il display è vuoto o poco luminoso:
  • Check battery power. Replace batteries if necessary.
  • Se si utilizza l'alimentazione USB, assicurarsi che il cavo sia collegato saldamente e che l'adattatore di alimentazione sia funzionante.
  • If on battery power, activate the display by touch or sound.
• L'orologio non segna l'ora esatta:
  • Reset the time as per Section 3.1.
  • Ensure stable power supply (fresh batteries or reliable USB connection).
• L'allarme non suona:
  • Verify the alarm is activated (check for the alarm indicator on the display).
  • Assicurarsi che l'orario della sveglia sia impostato correttamente.
• Sound/Touch activation not working:
  • This feature primarily functions when the clock is powered by batteries. Ensure batteries are fresh.
  • Check if the clock is in a mode that disables this feature (refer to advanced settings if available, though not detailed in basic product info).

6. Specifiche

7. Garanzia e supporto

7.1 Informazioni sulla garanzia

This Karlsson product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty duration and terms may vary by region and retailer. For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer.

7.2 Assistenza clienti

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your point of purchase or visit the official Karlsson website for support resources. Ensure you have your model number (KA5805WD) and proof of purchase ready when contacting support.