1. Prodotto finitoview
Il JBL Stage810 is an 8-inch car audio subwoofer designed to deliver high-output and low-distortion bass. It features a lightweight yet stiff polypropylene woofer cone with a hi-roll rubber surround, ensuring high efficiency and durability. This subwoofer is engineered to integrate effectively with various car audio amplifiers, providing a signature JBL sound experience.
Immagine 1.1: anteriore view della JBL Stage810 subwoofer, showcasing the cone and JBL branding.
Caratteristiche principali:
- High-output and low-distortion bass performance.
- Power handling capability of up to 800 watts peak power or 200W RMS.
- Frequency response range of 38 - 200Hz.
- Mounting depth: 6-15/16 inches (175mm).
- Lightweight yet stiff polypropylene woofer cone.
- Hi-roll rubber surround for durability.
2. Cosa c'è nella scatola
Verificare che tutti i componenti siano presenti al momento del disimballaggio:
- 1 JBL Stage810 Subwoofer
- 1 guarnizioni in schiuma
- Manuale del proprietario (questo documento)
- 2 x Two-color Brand Stickers
3. Configurazione e installazione
Un'installazione corretta è fondamentale per prestazioni e sicurezza ottimali. Si raccomanda di affidare l'installazione a un professionista qualificato.
3.1 Considerazioni sul montaggio
Before mounting, ensure the chosen location in your vehicle provides adequate space and structural integrity to support the subwoofer. Consider the mounting depth of 6-15/16 inches (175mm) to avoid interference with vehicle components.
Immagine 3.1: Lato view della JBL Stage810 subwoofer, illustrating its mounting depth.
3.2 Wiring and Ampconnessione lifier
- Collegamento elettrico: Collegare il amplifier's power input directly to the vehicle's battery using an appropriate gauge power wire and fuse.
- Collegamento a terra: Connetti in modo sicuro il amplifier's ground terminal to a clean, unpainted metal surface on the vehicle chassis.
- Accensione remota: Collegare il amplifier's remote turn-on terminal to the remote output of your head unit.
- Ingresso segnale: Connect the RCA outputs from your head unit to the RCA inputs on your amppiù vivace.
- Collegamento subwoofer: Collegare il subwoofer al amplifier's speaker output terminals. Ensure correct polarity (+ to + and - to -) to prevent phase issues. The JBL Stage810 has an impedance of 4 Ohms.
Fare riferimento al tuo amplifier's instruction manual for specific wiring diagrams and recommendations.
Immagine 3.2: posteriore view della JBL Stage810 subwoofer, displaying model information and basic specifications.
4. Utilizzo del subwoofer
Once installed, the subwoofer operates in conjunction with your car audio system and amplifier. Adjustments for bass output and crossover frequencies are typically made on the amplificatore o unità principale.
4.1 Initial Sound Adjustment
- Inizia con il ampcontrollo del guadagno del lifier al minimo.
- Play a familiar piece of music with strong bass content.
- Aumenta lentamente il amplifier's gain until the desired bass level is achieved without distortion.
- Regola il filtro passa-basso (LPF) sul tuo amplifier or head unit to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80-100 Hz.
- Adjust phase settings if available, to ensure the subwoofer's output is in phase with the main speakers.
5. Manutenzione
Il JBL Stage810 subwoofer requires minimal maintenance to ensure long-term performance.
- Pulizia: Use a soft, dry cloth to wipe the subwoofer cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Ispezione: Periodically check the wiring connections for tightness and ensure there are no signs of corrosion or damage. Inspect the subwoofer surround for any tears or cracks.
- Ambiente: Ensure the subwoofer is not exposed to excessive moisture or extreme temperatures, which can degrade performance and lifespan.
6. Risoluzione Dei Problemi
Se riscontri problemi con il tuo JBL Stage810 subwoofer, refer to the following common troubleshooting steps:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun suono dal subwoofer |
|
|
| Suono distorto |
|
|
| Weak or Muffled Bass |
|
|
If problems persist after following these steps, consult a professional car audio technician.
7. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Nome del modello | STAGE 810 |
| Tipo di altoparlante | Subwoofer |
| Diametro subwoofer | 8 pollici |
| Gestione della potenza di picco | 800 Watt |
| Gestione della potenza RMS | 200 Watt |
| Risposta in frequenza | 38 - 200 Hz |
| Impedenza | 4 Ohm |
| Profondità di montaggio | 6-15/16" (175 mm) |
| Dimensioni del prodotto (P x L x A) | 10.63" x 10.63" x 5.51" |
| Peso dell'articolo | 2 libbre |
| Tecnologia di connettività | Cablato |
| Colore | Nero |
8. Garanzia e supporto
JBL products are designed for reliability and performance. This product comes with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official JBL websito.
For technical support, service, or further inquiries, please visit the official JBL support page:
