1. Introduzione
Thank you for choosing the Eglo 98187 Solar Wall Light. This outdoor spotlight is designed to provide illumination in garden areas, patios, or entrances where electrical wiring is not readily available. Featuring an integrated motion sensor and an external solar panel, it offers convenience, security, and energy efficiency. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Figure 1: Eglo 98187 Solar Wall Light in an outdoor setting.
2. Istruzioni di sicurezza
- Ensure the product is installed on a stable surface and in a location where it will not be easily damaged.
- Do not attempt to modify or disassemble the light or solar panel. This may void the warranty and pose a safety risk.
- Mantenere pulito il pannello solare per garantire prestazioni di ricarica ottimali.
- This product is designed for outdoor use and has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. However, do not submerge it in water.
- Smaltire le batterie in modo responsabile, nel rispetto delle normative locali.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- 1 x Eglo 98187 Solar Wall Light unit with integrated LED board
- 1 x External Solar Panel
- Materiale di montaggio (viti, tasselli)
- Manuale di istruzioni
4. Specifiche
| Marca | EGLO |
| Numero di modello | 98187 |
| Materiale | Plastica |
| Colore | Nero |
| Dimensioni del prodotto (L x P x A) | Dimensioni: 15.5 x 11 x 14.5 cm |
| Peso dell'articolo | 510 grammi |
| Grado di protezione IP | Grado di protezione IP44 |
| Sorgente luminosa | LED integrato |
| Flusso luminoso | 150 lumen |
| Energia | 2 Watt |
| Temperatura del colore | 3000 Kelvin (bianco caldo) |
| Voltage | 1.2 Volt |
| Batteria | 3 AA (incluso) |
| Caratteristiche speciali | Motion Sensor, Water Resistant, Automatic On/Off |

Figura 2: Dimensioni del prodotto.
5. Configurazione e installazione
Follow these steps to install your Eglo 98187 Solar Wall Light:
- Scegli una posizione: Select a wall or surface for the light unit and a separate location for the solar panel. The solar panel requires direct sunlight for at least 6 hours daily to fully charge the battery. Avoid shaded areas.
- Montare l'unità luminosa:
- Mark the drilling points on the wall using the light unit as a template.
- Praticare dei fori e inserire i tasselli forniti.
- Secure the light unit to the wall using the provided screws.

Figure 3: Mounting points and switch on the light unit.
- Montare il pannello solare:
- Position the solar panel in a location that receives maximum direct sunlight throughout the day.
- Mark and drill holes, then secure the solar panel bracket using the provided screws.
- Regolare l'angolazione del pannello solare per ottimizzare l'esposizione al sole.

Figure 4: Solar panel and light unit connection.
- Collegare il pannello solare: Plug the cable from the solar panel into the input port on the light unit. Ensure the connection is secure.
- Carica iniziale: Allow the solar panel to charge the battery for at least 24-48 hours in direct sunlight before first use to ensure optimal performance.

Figure 5: Installation diagram.
6. Istruzioni per l'uso
The Eglo 98187 Solar Wall Light features a multi-function switch and an integrated motion sensor.
- Cambia impostazioni: Locate the switch on the back of the light unit (refer to Figure 3). It typically has three positions: AUTO, OFF, and ON.
- AUTO: This is the recommended setting. The light will automatically turn on at dusk when motion is detected within its range. It will turn off after a set period of no motion.
- OFF: The light will remain off, regardless of motion or ambient light. Use this setting for storage or if you do not wish for the light to operate.
- SOPRA: The light will remain continuously on at night until the battery drains or dawn breaks. This setting is not recommended for daily use as it will deplete the battery quickly.
- Sensore di movimento: The integrated motion sensor has a detection angle of 90 degrees and a range of up to 8 meters. Ensure the sensor is not obstructed for optimal performance.
- Funzionamento automatico: In AUTO mode, the light charges during the day via the solar panel. At night, it will activate when motion is detected, providing illumination for safety and convenience.

Figura 6: Fronte view of the light unit with LED and motion sensor.
7. Manutenzione
Regular maintenance ensures optimal performance and extends the lifespan of your solar wall light.
- Pulizia del pannello solare: Pulire periodicamente il pannello solare con un panno morbido e asciutto.amp panno per rimuovere polvere, sporco o detriti. Un pannello pulito garantisce una ricarica efficiente.
- Pulizia dell'unità luminosa: Clean the light unit and motion sensor lens with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Sostituzione della batteria: The light uses 3 AA batteries. While included, these are typically rechargeable and designed for long-term use. If the light's performance significantly degrades over time (e.g., shorter illumination time), the rechargeable batteries may need replacement. Use only rechargeable AA batteries of the same type and capacity.
- Regolazioni stagionali: In winter months or periods of reduced sunlight, ensure the solar panel is free of snow or ice and adjust its angle if necessary to capture maximum available light.
8. Risoluzione Dei Problemi
If your Eglo 98187 Solar Wall Light is not functioning as expected, try the following solutions:
- La luce non si accende di notte:
- Assicurarsi che l'interruttore sia impostato su AUTO.
- Verify the solar panel is clean and receiving at least 6 hours of direct sunlight daily.
- Check the connection cable between the solar panel and the light unit.
- The battery may be depleted. Allow several days of full sunlight charging.
- Il sensore di movimento non rileva:
- Assicurarsi che la lente del sensore sia pulita e libera da ostruzioni.
- Verify the light is installed within the recommended detection range (up to 8 meters).
- Test the sensor by walking directly in front of it at night.
- Light stays on continuously or flashes:
- Assicurarsi che l'interruttore sia impostato su AUTO, not ON.
- Insufficient charge can sometimes cause erratic behavior. Allow for more charging time.
9. Garanzia e supporto
EGLO products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or visit the official EGLO website. If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact EGLO customer support or your retailer for assistance.
EGLO Contact Information:
Per favore visita www.eglo.com for regional contact details and support.





