Introduzione
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Rocketfish Tilting TV Wall Mount. This mount is designed to securely hold flat-panel TVs ranging from 32 to 90 inches, with a maximum weight capacity of 130 lbs. Please read this manual thoroughly before beginning installation.
Informazioni importanti sulla sicurezza
AVVERTIMENTO: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact customer support or a qualified installer.
- Do not install this product if you cannot understand the installation instructions.
- Assicurarsi che la superficie di montaggio possa sostenere in modo sicuro il peso combinato del supporto e della TV.
- Utilizzare solo l'hardware fornito. Non utilizzare il supporto per scopi diversi da quelli espressamente specificati dal produttore.
- Questo prodotto è destinato esclusivamente all'uso in ambienti interni.
- Always ensure the TV is securely attached to the mount before releasinidiota.
Contenuto della confezione
Verify that all components are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer service for assistance.
- Montaggio piastra a parete
- Staffe TV (2)
- Kit di montaggio (viti varie, rondelle, distanziali, tasselli)
- Manuale di istruzioni (questo documento)
Image: Main components of the Rocketfish Tilting TV Wall Mount, including the wall plate and two TV brackets.
Immagine: Smontato view of the Rocketfish Tilting TV Wall Mount, showing the wall plate and the two vertical TV mounting arms.
Configurazione e installazione
Proper installation is crucial for the safety and performance of your TV mount. It is highly recommended to have at least two people for installation.
Strumenti necessari (non inclusi):
- Trova stud
- Trapano
- Livello
- Cacciavite con testa Phillips
- Matita
- Nastro di misurazione
Installazione passo dopo passo:
- Preparare la TV: Lay your TV face down on a soft, clean surface. Attach the two TV brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes.
- Individuare i montanti della parete: Use a stud finder to locate the center of two adjacent wooden studs in your desired mounting location. Mark these locations with a pencil. For concrete or brick walls, use appropriate anchors (not always included, check hardware kit).
- Posizionare la piastra a muro: Hold the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drill hole locations.
- Praticare i fori pilota: Drill pilot holes at the marked locations. The size of the drill bit will depend on the type of wall and the lag bolts being used. Refer to the hardware kit instructions for specific drill bit sizes.
- Fissare la piastra a muro: Secure the wall plate to the wall using the lag bolts and washers. Tighten all bolts firmly, but do not overtighten.
- Appendere la TV: With assistance, carefully lift the TV and hook the TV brackets onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
- Mettere in sicurezza la TV: Individuare le viti di sicurezza o i meccanismi di bloccaggio nella parte inferiore delle staffe del televisore. Serrarli per fissare il televisore alla piastra a muro ed evitare che si sposti accidentalmente.
Operating the Tilting Feature
The Rocketfish Tilting TV Wall Mount allows for easy adjustment of your TV's vertical viewangolo di ing.
- To tilt the TV, gently push or pull the bottom edge of the TV to achieve the desired angle. The mount is designed for smooth, fingertip tilt action.
- The maximum tilt angle is approximately 10 degrees.
- Ensure all cables are clear and not pinched when adjusting the tilt.
Manutenzione
Una manutenzione regolare garantisce la longevità e il funzionamento sicuro del supporto TV.
- Pulizia: Pulire il supporto con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
- Controlli periodici: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause fasteners to loosen.
- Limite di peso: Never exceed the maximum weight capacity of 130 lbs (58.9 kg).
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La TV non è in piano. | Piastra a muro non livellata durante l'installazione. | Remove TV, loosen wall plate bolts, adjust with a level, and re-tighten. |
| Difficulty plugging in cables after mounting. | Limited space between TV and wall. | It is recommended to connect all necessary cables to the TV before mounting. If already mounted, carefully tilt the TV to access ports or consider using right-angle adapters. |
| Il supporto sembra instabile. | Elementi di fissaggio allentati o installazione non corretta. | Immediately remove TV. Re-check all mounting points and fasteners for tightness. Ensure installation followed instructions for wall type. |
| TV does not tilt smoothly. | Il meccanismo potrebbe essere rigido o ostruito. | Check for any obstructions behind the TV. Ensure the tilt mechanism is clean and free of debris. |
Specifiche
- Modello: RF-TVMLPT03
- Dimensioni del prodotto: 1.9 x 28.5 x 17.5 pollici
- Peso dell'articolo: 6 libbre
- Materiale: Metallo
- Tipo di montaggio: Montaggio a parete
- Tipo di movimento: Inclinare
- Dimensioni minime TV compatibili: 32 pollici
- Dimensioni massime TV compatibili: 90 pollici
- Capacità di peso massima: Fino a 130 libbre (58.9 kg)
- Angolo di inclinazione massimo: 10 gradi
- Colore: Nero
Garanzia e supporto
For warranty information or technical support, please refer to the official Rocketfish webo contattare il servizio clienti. Conservare la ricevuta d'acquisto per eventuali reclami in garanzia.
Disclaimer legale: Up to 130 lbs. for sturdy support. (Product packaging may indicate compatibility with 32" - 56" flat-panel TVs.)
