Manuale di istruzioni per il supporto da parete per monitor singolo ONKRON G120-BLK
Model: G120-BLK
Introduzione
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Informazioni sulla sicurezza
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- Non superare la capacità di peso massima di 17.6 libbre (8 kg).
- Questo supporto è progettato per monitor da 13 a 34 pollici.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Tenere lontani bambini e animali domestici durante l'installazione.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- Piastra VESA
- Piastra a muro
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Chiave a brugola (6mm)
- Manuale di istruzioni
Configurazione e installazione
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Videoguida all'installazione
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Passaggio 1: contrassegnare i fori
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Fase 2: Installazione del supporto
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Fissare la piastra a muro alla parete utilizzando le viti e i tasselli appropriati. Assicurarsi che sia saldamente fissata e in piano.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Giro Antiorario for lighter screens (to reduce tension).
- Giro in senso orario for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewcomfort.
- Regolazione dell'altezza: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Estensione/Retrazione: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Inclinazione: Regola l'inclinazione del monitor da +90° a -45° per ridurre i riflessi e trovare la tua posizione preferita viewangolo di ing.
- Girevole: Swivel the monitor 180° left or right.
- Rotazione: Rotate the monitor 360° for landscape or portrait orientation.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Gestione dei cavi
Utilizza il sistema di gestione dei cavi integrato per mantenere ordinato il tuo spazio di lavoro.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Immagine: Primo piano view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Manutenzione
Una manutenzione regolare garantisce la longevità e le prestazioni ottimali del supporto per monitor.
- Pulizia: Pulisci il supporto con un panno morbido eamp panno. Evitare detergenti abrasivi o solventi.
- Controlli periodici: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati. Serrare nuovamente se necessario.
- Regolazione della molla a gas: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Risoluzione dei problemi
Fare riferimento a questa sezione per trovare soluzioni ai problemi più comuni.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il monitor si abbassa o non rimane all'altezza desiderata. | La tensione della molla a gas è troppo bassa per il peso del monitor. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | La tensione della molla a gas è troppo elevata per il peso del monitor. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Il supporto sembra instabile o traballante. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Le giunture sono troppo strette. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Specifiche
- Modello: G120-BLK
- Compatibilità delle dimensioni dello schermo: 13 - 34 pollici
- Capacità di peso: 2.2 - 17.6 libbre (1 - 8 kg)
- Compatibilità VESA: 75x75mm, 100x100mm
- Angolo di inclinazione: da +90° a -45°
- Angolo di rotazione: 180°
- Rotazione: 360°
- Regolazione dell'altezza: 11 pollici (28 cm)
- Estensione del braccio: Da 3.5 pollici (8.9 cm) a 13.7 pollici (34.8 cm)
- Materiale: Alluminio
- Dimensioni del prodotto: 16.34 x 2.28 x 6.61 pollici (41.5 x 5.8 x 16.8 cm)
- Peso dell'articolo: 3.96 libbre (1.8 kg)
Garanzia e supporto
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON websito.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Informazioni sui contatti: Please refer to the ONKRON websito o sulla confezione del prodotto per i dettagli di contatto più aggiornati.
