1. Introduzione e oltreview
The Ledvance Endura Pro Flood LED Outdoor Projector is a highly efficient, wall-mounted sensor floodlight designed for outdoor use. It features a wide beam angle and an innovative optical design, providing uniform surface illumination. Equipped with a motion detector, this projector offers enhanced security and convenience for various outdoor applications.
Key features include an adjustable lamp head for customized lighting, a robust IP55 protection rating for outdoor durability, and an IK05 impact resistance rating. This product is suitable for illuminating parking lots, squares, parks, and other exterior areas.
Figure 1: Ledvance Endura Pro Flood LED Projector packaging.
2. Informazioni sulla sicurezza
Si prega di leggere attentamente tutte le istruzioni di sicurezza prima dell'installazione e dell'uso. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.
- Sicurezza elettrica: L'installazione deve essere eseguita da un elettricista qualificato in conformità con tutte le normative elettriche locali e nazionali. Assicurarsi che l'alimentazione sia scollegata prima di procedere all'installazione, alla manutenzione o alla riparazione.
- Uso esterno: This product is designed for outdoor use with an IP55 rating, protecting against dust and low-pressure water jets. Do not submerge the product in water.
- Montaggio: Mount the projector securely on a stable surface that can support its weight.
- Sorgente luminosa: This luminaire contains a non-replaceable LED light source. Do not attempt to replace the LED module.
- Temperatura di esercizio: Assicurarsi che l'ambiente operativo rientri nell'intervallo di temperatura specificato per evitare il surriscaldamento.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti nella confezione:
- 1 x Ledvance Endura Pro Flood LED Projector with Motion Detector
- Materiale di montaggio (viti, tasselli) - (Typically included, but check your specific package)
- Manuale di istruzioni
4. Configurazione e installazione
Follow these steps for proper installation of your LED projector:
- Preparazione: Disconnect power at the main circuit breaker before beginning installation. Choose a suitable mounting location on an outdoor wall, ensuring it is stable and provides the desired illumination coverage.
- Montaggio: Use the provided mounting hardware to securely attach the projector to the wall. Mark the drilling points, drill holes, insert wall plugs, and then fasten the projector base.
- Cablaggio: Connect the electrical wires (Live, Neutral, Earth) from your power supply to the corresponding terminals on the projector. Ensure all connections are tight and properly insulated. Refer to the wiring diagram in the product packaging for specific details.
- Regolazione della Lamp Testa: Il lamp head is pivotable. Adjust its angle to direct the light beam to your desired area.
Figura 2: Dimensioni del prodotto per la pianificazione dell'installazione.
5. Istruzioni per l'uso
The Ledvance Endura Pro Flood projector offers four selectable operating modes. These modes are typically set via controls located on the unit, often behind a cover or on the side panel.
Figura 3: Esample of sensor and adjustment controls (actual appearance may vary).
5.1. Selezione della modalità
Refer to the markings next to the adjustment dials or switches on your specific unit to select one of the following modes:
- Permanent Light: The projector remains continuously illuminated, regardless of motion or ambient light levels.
- Stand-by: The projector may operate at a reduced brightness level (e.g., 20%) and switch to full brightness upon motion detection. This mode provides a constant low-level light for ambiance and security.
- Attivazione del movimento: The projector turns on to full brightness only when motion is detected within its sensor range. It will turn off after a set delay if no further motion is detected.
- Dal tramonto all'alba: The projector automatically turns on at dusk and off at dawn, based on ambient light levels. Motion detection may still be active in this mode, triggering full brightness when needed.
5.2. Sensor Adjustments
Your projector typically includes controls for:
- Time Delay (TIME): Adjusts how long the light stays on after motion is detected.
- Sensibilità (SENS): Adjusts the detection range or sensitivity of the motion sensor.
- Lux Level (LUX): Sets the ambient light threshold at which the sensor becomes active (for dusk-to-dawn or motion modes).
Experiment with these settings to achieve optimal performance for your specific environment.
Figure 4: Motion detection in action, illuminating a path.
6. Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità del proiettore.
- Pulizia: Periodically clean the lens and sensor window with a soft, damp cloth to remove dust, dirt, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners or solvents.
- Ispezione: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten any loose screws and replace damaged components if necessary.
- Nessuna parte riparabile dall'utente: The LED light source is integrated and not user-replaceable. Do not attempt to open the housing or modify the internal components.
7. Risoluzione Dei Problemi
Se riscontri problemi con il proiettore, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | No power supply; faulty wiring; sensor settings incorrect; ambient light too high. | Check circuit breaker and power connections. Verify wiring. Adjust LUX setting to a lower value. Ensure motion is within sensor range. |
| La luce rimane costantemente accesa. | Mode set to Permanent Light; continuous motion detected; sensor faulty. | Change operating mode. Check for constant movement in sensor range (e.g., tree branches). Clean sensor lens. |
| La luce si accende in modo casuale. | Sensor too sensitive; environmental factors (e.g., animals, heat sources, wind). | Reduce SENS setting. Reposition projector to avoid false triggers. |
| La luce è fioca o tremolante. | Insufficient power; wiring issue; product defect. | Check power supply and wiring connections. If problem persists, contact customer support. |
Se le procedure di risoluzione dei problemi non risolvono il problema, contattare l'assistenza clienti per ulteriore assistenza.
8. Specifiche
| Specificazione | Valore |
|---|---|
| Marca | LEDVANCE |
| Numero di modello | 4058075228849 |
| Dimensioni del prodotto (L x P x A) | Dimensioni: 20.1 x 5.6 x 22.5 cm |
| Peso dell'articolo | 480 grammi |
| Grado di protezione IP | Grado di protezione IP55 |
| Materiale | Policarbonato (PC) |
| Energia | 30 Watt |
| Flusso luminoso | 3000 lumen |
| Temperatura del colore | 4000 gradi Celsius |
| Durata media della vita | 50000 ore |
| Stile | Con rilevatore di movimento |
| Tipo di lampadina | GUIDATO |
| Voltage | 230 Volt |
| Paese di origine | Germania |
9. Garanzia e supporto
This Ledvance Endura Pro Flood LED Projector comes with a Garanzia di 10 anni, ensuring quality and reliability. For warranty claims or technical support, please retain your proof of purchase and contact your retailer or Ledvance customer service.
For additional information or assistance, please visit the official Ledvance websito o consultare il rivenditore locale.
