Manuale d'uso dell'attuatore per tapparelle Finder YESLY

Introduzione

This manual provides essential information for the installation, operation, and maintenance of the Finder YESLY Roller Shutter Actuator, Model 13.S2.8.230.B000. This device is a multifunction electronic relay designed for controlling roller shutters and electric curtains within the YESLY system. It features Bluetooth 4.2 Low Energy connectivity for programming via the Finder Toolbox application and supports both wired and wireless button inputs.

Informazioni sulla sicurezza

Leggere attentamente tutte le istruzioni di sicurezza prima dell'installazione e dell'uso. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o lesioni gravi.

• L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutti i codici elettrici locali e nazionali.
• Ensure the main power supply is disconnected before performing any installation or maintenance work.
• Non esporre il dispositivo a umidità o temperature estreme.
• Verificare che i collegamenti elettrici siano corretti per evitare danni al dispositivo o alle apparecchiature collegate.
• The device operates at 230V AC. Handle with extreme care.

Prodotto finitoview

The Finder YESLY Roller Shutter Actuator is a compact, flush-mountable device. Below is an image illustrating its key features and terminal connections.

Descrizione dell'immagine: A white, rectangular Finder YESLY Roller Shutter Actuator (Model 13.S2.8.230.B000) is shown from a slightly elevated angle. The top surface displays the "Finder" logo, the model number "13.S2.8.230.B000", and electrical specifications: "Un 230V~" (Nominal Voltage 230V AC) and "6A230V~" (6 Amperes at 230V AC). A Bluetooth symbol is visible, indicating wireless connectivity. The "CE" mark and "Made in EU-01" are also present. Below these markings, six screw terminals are visible, labeled from left to right as P2, P1, CH2, CH1, L, and N. These labels correspond to inputs for wired buttons (P1, P2), motor control channels (CH1, CH2), and power supply (L for Line, N for Neutral). The device is designed for flush mounting, typically in a Ø 60 mm round box.

The device features two independent and programmable NO (Normally Open) contacts for motor control (CH1, CH2) and two inputs for wired push-buttons (P1, P2).

Configurazione e installazione

This actuator is designed for flush mounting, typically within a standard Ø 60 mm round electrical box.

Istruzioni di cablaggio:

1. Alimentazione elettrica: Connect the Line (L) conductor to the 'L' terminal and the Neutral (N) conductor to the 'N' terminal. Ensure the power supply is 230V AC.
2. Collegamento del motore: Connect the motor's 'Up' control wire to the 'CH1' terminal and the motor's 'Down' control wire to the 'CH2' terminal. Refer to your motor's manual for specific wiring.
3. Wired Button Inputs: If using wired push-buttons, connect them to the 'P1' and 'P2' terminals. These inputs can be configured for various functions (e.g., Up/Down, Stop) via the Finder Toolbox app.
4. Connessioni sicure: Assicurarsi che tutti i terminali a vite siano serrati saldamente per evitare collegamenti allentati.

Configurazione iniziale e associazione:

• Download the "Finder Toolbox" application from your device's app store (available for iOS and Android).
• Assicurati che il Bluetooth sia abilitato sul tuo smartphone o tablet.
• Open the Finder Toolbox app and follow the on-screen instructions to discover and pair with your YESLY actuator. The device uses Bluetooth 4.2 Low Energy with 128-bit encrypted connection.
• Once paired, you can configure the actuator's parameters, including motor travel limits, button functions, and scene settings.

Istruzioni per l'uso

The Finder YESLY Actuator can be operated in several ways:

• Via Wired Buttons: Use the physical push-buttons connected to P1 and P2 terminals to control the roller shutters/curtains (e.g., press for Up, press for Down, press again to stop). The exact behavior depends on the configuration set in the Finder Toolbox app.
• Via Wireless Buttons (Beyon): Pair compatible Finder Beyon wireless buttons (Type 013B9) with the actuator through the Finder Toolbox app. These buttons offer flexible placement and control.
• Via Finder Toolbox App: Use the dedicated mobile application to directly control the connected roller shutters/curtains, set schedules, create scenes, and manage other YESLY devices.

Manutenzione

The Finder YESLY Actuator is designed for long-term, maintenance-free operation. However, periodic checks can ensure optimal performance:

• Pulizia: If necessary, gently wipe the device's exterior with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Verifica della connessione: Periodically (e.g., annually), with power disconnected, check that all wiring connections to the terminals remain secure.
• Aggiornamenti del firmware: Check the Finder Toolbox app for any available firmware updates for the actuator to ensure you have the latest features and bug fixes.

Risoluzione dei problemi

If you encounter issues with your Finder YESLY Actuator, refer to the following common problems and solutions:

Specifiche

Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al Finder ufficiale webo contattare il distributore locale. Conservare la ricevuta d'acquisto come prova d'acquisto.