1. Introduzione
Thank you for choosing Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulbs. Please read these instructions thoroughly before installation and retain them for future reference.
2. Informazioni sulla sicurezza
- Prima dell'installazione, della rimozione o dell'ispezione, disattivare sempre l'alimentazione elettrica tramite l'interruttore automatico.
- Do not use with dimmers unless explicitly stated on the product or packaging. These bulbs are non-dimmable.
- Ensure the fixture is compatible with Type A (Plug & Play) LED tubes. Refer to the compatible ballast list.
- Do not bend the tube during installation.
- This product is designed for indoor use and suitable for damp posizioni.
- Non tentare di smontare o modificare la lampadina.
- Tenere fuori dalla portata dei bambini.
3. Contenuto della confezione
Ogni confezione contiene:
- 4 x Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights
Image: Four Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights, shown in a pack.
Image: Packaging for the Feit Electric 4ft LED Universal Linear Lamp, indicating "Plug & Play (Type A)" and T8/T12 replacement.
4. Caratteristiche del prodotto
- Plug & Play (Type A): Direct installation into existing fluorescent fixtures without rewiring or ballast removal.
- Risparmio energetico: Uses 14 watts, replacing 32/40 watt fluorescent bulbs, producing 1700 lumens.
- Colore chiaro: 3000K Warm White for a soft, crisp light.
- Lunga durata: Rated for up to 50,000 hours, reducing replacement frequency.
- Accensione immediata: Provides full brightness immediately with no flickering or strobing.
- Shatterproof Coating: Maggiore durata.
- Certificazioni: UL Listed, DLC Certified, RoHS compliant, 100% mercury-free.
Image: Graphic detailing key product specifications: 14 Watts (equivalent to 40 Watts), 1700 Lumens, G13 Bi-Pin Base, and Plug & Play (Type A) functionality.
Image: Graphic illustrating the product dimensions: 48 inches in length and 1.1 inches in width, highlighting its shatterproof coating.
5. Configurazione e installazione
- Spegni: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker.
- Rimuovere i vecchi tubi fluorescenti: Carefully remove the existing fluorescent tubes from the fixture.
- Check Ballast Compatibility: Verify that your existing ballast is compatible with Type A LED tubes. Refer to the "Compatible Ballasts" section or the product packaging for a list of compatible ballasts.
- Installare il tubo LED: Insert the two pins of the Feit Electric LED tube into the lampholders on one end of the fixture. Gently push the tube into place and twist it until it locks securely into the lampholders on both ends. Ensure the tube is firmly seated.
- Ripristina alimentazione: Una volta installato saldamente il tubo LED, ripristinare l'alimentazione tramite l'interruttore automatico.
- Test: Accendere l'interruttore della luce per confermare il corretto funzionamento.
Image: Diagram illustrating the "Direct Replacement (Type A)" installation method, showing the LED tube connecting to an existing ballast without rewiring.
Image: A detailed list of various compatible ballasts required for the proper function of the Feit Electric LED tubes.
6. Istruzioni per l'uso
After successful installation, simply use your existing light switch to turn the Feit Electric LED tube lights on and off. These bulbs provide instant full brightness without any warm-up time or flickering.
Image: An installed Feit Electric LED tube light illuminating a garage, demonstrating instant full brightness without flickering or strobing.
Image: A Feit Electric 3000K Warm White LED tube light installed and emitting a warm, soft light.
7. Manutenzione
Feit Electric LED tube lights are designed for long-term, maintenance-free operation. They have an average life of 50,000 hours. No special cleaning or bulb replacement procedures are typically required during their lifespan. To clean the exterior of the bulb, ensure power is off and wipe with a soft, dry cloth.
8. Risoluzione Dei Problemi
La luce non si accende:
- Assicurarsi che l'interruttore di alimentazione sia in posizione "ON".
- Check that the circuit breaker is not tripped.
- Verify the LED tube is correctly seated in the lamptitolari.
- Confirm your existing ballast is compatible with Type A LED tubes. Incompatible ballasts may prevent the bulb from lighting or cause flickering.
- If replacing multiple bulbs, test each new bulb individually to identify any faulty units.
La luce tremola:
- Ensure the LED tube is fully and correctly inserted into the fixture.
- Verify ballast compatibility. An incompatible or failing ballast can cause flickering.
9. Specifiche
| Marca | Feit elettrico |
| Numero di modello | T48/830/LEDG2/4 |
| Tipo di luce | GUIDATO |
| Cosatage | 14 Watt |
| Equivalente a incandescenza | 32-40 Watts |
| Luminosità | 1700 lumen |
| Temperatura del colore | 3000K (bianco caldo) |
| Forma della lampadina Dimensioni | T8/T12 |
| Base della lampadina | G13 (Bi-Pin) |
| Voltage | 120 Volt |
| Vita media | 50,000 ore |
| Dimmerabile | NO |
| Materiale | Plastica (infrangibile) |
| Certificazioni | UL Listed, DLC Certified, RoHS Compliant |
| Mercury libero | SÌ |
10. Garanzia e supporto
This Feit Electric bulb comes with a Garanzia di 5 anno. For warranty claims or technical support, please contact Feit Electric customer service. Refer to the official Feit Electric websito per le informazioni di contatto più aggiornate.
Per ulteriori informazioni sul prodotto, visitare il sito Feit Electric Storefront.
