1. Prodotto finitoview
The TCP 07106 L9PLVD5041K is a 9-watt LED BR30 bulb designed as a direct replacement for traditional CFL (Compact Fluorescent Lamp) bulbs. It features a 4-pin (G24q/GX24q) base, operates on 120/277 volts, and emits a cool white light at 4100K. This LED bulb is ballast compatible and dimmable, offering energy efficiency and a long operational lifetime.
An image showing the TCP 07106 LED BR30 bulb. It features a white, reflector-style bulb head tapering down to a 4-pin base, designed for compatibility with CFL fixtures.
2. Informazioni sulla sicurezza
Please read and understand all instructions before installation and use. Retain this manual for future reference.
- Rischio di scossa elettrica: Always turn off power at the circuit breaker or fuse box before installing or servicing the fixture.
- Solo per uso interno: This bulb is designed for indoor applications. Do not use in wet locations or where directly exposed to water.
- Compatibilità con la zavorra: This LED bulb is designed to be ballast compatible. Ensure your existing ballast is compatible with LED PL lamps. Consult a qualified electrician if unsure.
- Dimmerabilità: This product is dimmable. Ensure your dimmer switch is compatible with LED lighting to avoid performance issues or damage.
- Temperatura di esercizio: Do not install in fixtures that exceed the recommended operating temperature range.
- Non smontare: Do not attempt to disassemble or modify the bulb. This will void the warranty and may cause damage or injury.
- Smaltimento corretto: Smaltire la lampadina secondo le normative locali.
3. Caratteristiche del prodotto
- Tipo di sorgente luminosa: GUIDATO
- Cosatage: 9 Watt
- Voltage: 120/277 Volt
- Luminosità: 1150 lumen
- Temperatura del colore: 4100 Kelvin (bianco freddo)
- Dimensioni della forma della lampadina: BR30
- Tipo di base: 4-Pin (G24q/GX24q)
- Dimmerabile: SÌ
- Durata media: 50,000 ore
- Indice di resa cromatica (CRI): 80
- Equivalente a incandescenza: 18 Watt
- Certificazione: UL, cUL
4. Configurazione e installazione
This LED bulb is designed to replace existing CFL bulbs in compatible fixtures. Follow these steps for safe installation:
- Spegnimento dell'alimentazione: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker or fuse box. Verify the power is off by attempting to turn on the light switch.
- Rimuovere la lampadina esistente: Carefully remove the old CFL bulb from the fixture. Allow it to cool if it has been recently in use.
- Ispezionare l'apparecchio: Check the fixture for any damage or wear. Ensure the socket is clean and free of debris.
- Inserire una nuova lampadina a LED: Align the 4 pins of the TCP 07106 LED bulb with the corresponding slots in the fixture's G24q/GX24q base. Gently push the bulb into the socket until it is firmly seated. Do not force the bulb, as this may damage the pins or the socket.
- Ripristina alimentazione: Una volta installata saldamente la lampadina, ripristinare l'alimentazione all'apparecchio tramite l'interruttore automatico o la scatola dei fusibili.
- Operazione di prova: Accendere l'interruttore della luce per verificare che la lampadina funzioni correttamente.
Nota: This bulb is ballast compatible. No ballast bypass is required for installation in fixtures with compatible electronic ballasts. If the bulb does not light up, ensure the ballast is functioning correctly and is compatible with LED PL lamps. Consult a qualified electrician if you encounter issues.
5. Istruzioni per l'uso
The TCP 07106 LED BR30 bulb operates like a standard light bulb once installed. It is dimmable, allowing you to adjust the light output with a compatible dimmer switch.
- Funzione di accensione/spegnimento: Per accendere o spegnere la lampadina, usa l'interruttore della luce che hai già.
- dimming: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve the desired brightness level. Ensure your dimmer is rated for LED loads to prevent flickering or damage.
6. Manutenzione
The TCP 07106 LED BR30 bulb requires minimal maintenance due to its long lifespan.
- Pulizia: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Sostituzione: With an average lifetime of 50,000 hours, frequent replacement is not anticipated. When replacement is necessary, follow the installation steps in Section 4.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La lampadina non si accende. |
|
|
| La lampadina tremola o ronza. |
|
|
| L'emissione luminosa è troppo bassa o troppo alta. |
|
|
Se le procedure di risoluzione dei problemi non risolvono il problema, contattare l'assistenza clienti o un elettricista qualificato.
8. Specifiche
| Numero di modello | 07106 (L9PLVD5041K) |
| Marca | TCP |
| Tipo di sorgente luminosa | GUIDATO |
| Cosatage | 9 Watt |
| Voltage | 120/277 Volt |
| Luminosità | 1150 lumen |
| Temperatura del colore | 4100 Kelvin (bianco freddo) |
| Forma della lampadina Dimensioni | BR30 |
| Tipo di base | 4-Pin (G24q/GX24q) |
| Dimmerabile | SÌ |
| Vita media | 50,000 ore |
| Indice di resa cromatica (CRI) | 80 |
| Equivalente a incandescenza | 18 Watt |
| Uso interno/esterno | Al chiuso |
| Materiale | Rame (componenti interni) |
| Certificazioni | UL, cUL |
| Peso dell'articolo | 6.7 once |
| Dimensioni del pacco | 6.34 x 4.88 x 4.25 pollici |
9. Garanzia e supporto
TCP products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or the official TCP website. In case of issues or questions not covered in this manual, please contact TCP customer support.
Produttore: TCP
Codice UPC: 762148071068
Numero parte: 07106
Per ulteriore assistenza, visitare il TCP Store on Amazon or the official TCP websito.