UnitechMS652

Manuale utente della batteria ricaricabile Unitech MS652 da 800 mAh

Model: MS652 Battery (Part Number: 1400-900050G)

1. Introduzione

This manual provides essential instructions for the safe and effective use of your Unitech MS652 800mAh rechargeable battery. Please read this manual thoroughly before using the battery to ensure proper operation and to prevent damage or injury.

2. Prodotto finitoview

The Unitech MS652 800mAh battery is a genuine replacement or spare battery designed specifically for the Unitech MS652 ring scanner. It provides reliable power to ensure continuous operation of your device.

Unitech MS652 800mAh Battery

Figura 1: Unitech MS652 800mAh Battery. This image shows the black rectangular battery pack with a grey latch mechanism at the top, designed to fit into the Unitech MS652 ring scanner.

3. Configurazione e installazione

Follow these steps to install the battery into your Unitech MS652 ring scanner:

  1. Dispositivo di spegnimento: Ensure your Unitech MS652 ring scanner is completely powered off before attempting battery installation or removal.
  2. Individuare il vano batteria: Identify the battery compartment on your MS652 scanner. Refer to your scanner's user manual for exact location if unsure.
  3. Scomparto aperto: Carefully open the battery compartment cover. This may involve sliding a latch or unscrewing a small screw, depending on the scanner model.
  4. Inserire la batteria: Align the battery with the contacts inside the compartment. Gently push the battery into place until it clicks or sits securely. Ensure the grey latch mechanism on the battery aligns with the scanner's locking mechanism.
  5. Chiudi scomparto: Riposizionare il coperchio del vano batteria e fissarlo.
  6. Carica iniziale: For optimal performance, fully charge the battery before its first use.

4. Istruzioni per l'uso

The Unitech MS652 800mAh battery is designed for seamless integration with your MS652 ring scanner.

  • Ricarica: Use only the charger supplied or approved by Unitech for the MS652 scanner. Connect the scanner with the installed battery to the charger. The charging indicator on the scanner will typically show the charging status.
  • Primo utilizzo: It is recommended to fully charge the battery before its initial use to calibrate the battery meter and ensure maximum capacity.
  • Uso normale: The battery will power your MS652 scanner during operation. Monitor the battery level indicator on your scanner to determine when recharging is necessary.
  • Durata della batteria: Battery life varies depending on usage patterns, scanner settings, and environmental conditions.

5. Manutenzione

Proper maintenance can extend the life of your battery:

  • Ricarica regolare: Avoid completely draining the battery frequently. Recharge it when the device indicates low power.
  • Magazzinaggio: If storing the battery for an extended period, charge it to approximately 50% and store it in a cool, dry place (between 0°C and 25°C or 32°F and 77°F). Avoid extreme temperatures.
  • Pulizia: Keep battery contacts clean. Use a dry, soft cloth to wipe away any dust or debris.
  • Evitare danni fisici: Non far cadere, forare o smontare la batteria.

6. Risoluzione Dei Problemi

Se riscontri problemi con la batteria, tieni presente quanto segue:

  • Batteria non in carica:
    • Ensure the charger is properly connected to both the power source and the scanner.
    • Verify that the charger is the correct one for your Unitech MS652 scanner.
    • Controllare eventuali danni visibili alla batteria o al caricabatterie.
    • Clean the battery contacts on both the battery and the scanner.
  • Durata breve della batteria:
    • Assicurarsi che la batteria sia completamente carica prima dell'uso.
    • Reduce screen brightness or disable unnecessary features on the scanner to conserve power.
    • If the battery is old, its capacity may have degraded over time. Consider replacing it.
  • Il dispositivo non si accende:
    • Confirm the battery is correctly installed and fully charged.
    • Try a different, known-good battery if available.

If problems persist, contact Unitech customer support for assistance.

7. Specifiche

CaratteristicaDettaglio
MarcaUnitech
Compatibilità del modelloUnitech MS652 Ring Scanner
Tipo di batteriaRicaricabile
Capacità800 mAh (Milliamp Ore)
Numero di parte1400-900050G
Peso dell'articoloCirca 3.92 once
Conteggio unità1 Conteggio

8. Informazioni sulla sicurezza

Osservare le seguenti precauzioni di sicurezza per evitare lesioni o danni:

  • Utilizzare caricabatterie approvati: Only use chargers specifically designed and approved for the Unitech MS652 scanner and its battery. Using incompatible chargers can cause fire, explosion, or other hazards.
  • Evitare temperature estreme: Do not expose the battery to extreme heat (e.g., direct sunlight, near heaters) or cold. High temperatures can cause the battery to overheat, swell, or explode. Low temperatures can significantly reduce battery performance.
  • Non smontare: Never attempt to disassemble, puncture, or modify the battery. This can lead to short circuits, fire, or exposure to hazardous materials.
  • Smaltimento corretto: Do not dispose of batteries in household waste. Follow local regulations for proper disposal of rechargeable batteries. Many retailers and recycling centers offer battery recycling programs.
  • Tenere lontano dall'acqua: Do not immerse the battery in water or expose it to excessive moisture.
  • Tenere lontano dalla portata dei bambini: Conservare le batterie fuori dalla portata dei bambini.
  • Maneggiare con cura: Evitare di far cadere la batteria o di sottoporla a forti urti.

9. Garanzia e supporto

For warranty information or technical support regarding your Unitech MS652 800mAh battery or compatible device, please refer to the documentation provided with your Unitech MS652 ring scanner or visit the official Unitech website. You may also contact Unitech customer service directly for assistance.

Unitech Official Websito: www.unitech.com

Documenti correlati - MS652

Preview Manuale utente dello scanner ad anello 2D indossabile Unitech MS652Plus
Manuale utente completo per lo scanner ad anello 2D indossabile Unitech MS652Plus, che descrive in dettaglio configurazione, funzionamento, manutenzione, conformità normativa e funzionalità di scansione avanzate per i modelli MS652-AUDB00-SG e MS652-AUDB00-1G.
Preview Guida rapida allo scanner ad anello 2D indossabile Unitech MS652Plus
A quick start guide for the Unitech MS652Plus wearable 2D ring scanner, covering charging, pairing methods (NFC, Bluetooth HID, Bluetooth SPP), testing, tips, and configuration options for system info, data and memory, beeper control, operation mode, vibrator control, and auto power off.
Preview Manuale utente dello scanner ad anello 2D indossabile Unitech MS652
Manuale utente per lo scanner ad anello 2D indossabile Unitech MS652, che descrive in dettaglio installazione, funzionamento, manutenzione, conformità alle normative (FCC, CE, RoHS, WEEE, NCC) e linee guida di sicurezza per l'uso di laser, LED, batterie e adattatori.
Preview Manuale utente dello scanner ad anello 2D indossabile Unitech MS652 | Installazione, funzionamento, specifiche
Manuale utente completo per lo scanner ad anello 2D indossabile Unitech MS652, che descrive in dettaglio installazione, funzionamento, specifiche, supporto della simbologia, impostazioni dei comandi e conformità normativa per un'acquisizione dati efficiente.
Preview Manuale di programmazione Android Unitech per EA630/EA520/PA760/HT730
Questo manuale fornisce una guida completa alla programmazione dei dispositivi Unitech, in particolare dei modelli EA630, EA520, PA760 e HT730, utilizzando Unitech Scan Service (USS) per Android. Copre argomenti essenziali come l'avvio e la gestione dell'USS, la gestione della ricezione dei dati dei codici a barre, la configurazione delle impostazioni dello scanner e l'utilizzo dell'API Unitech Battery. La guida include...ample code in both Java and Kotlin for seamless integration into Android applications, enabling developers to efficiently control barcode scanning functionalities and access device data.
Preview Guida rapida allo scanner laser per codici a barre wireless Unitech MS836B 2.4G
Guida rapida per lo scanner laser per codici a barre wireless Unitech MS836B 2.4G, che illustra la configurazione, le modalità di funzionamento, la connettività e le impostazioni di base.