Manuale utente del case da gioco per PC Aerocool Bolt Mini MATX RGB

1. Prodotto finitoview

The AeroCool Bolt Mini is a high-performance mini tower PC case designed for MATX and Mini-ITX motherboards. It features a stylish Lightning Bolt RGB LED design on the front panel, a full tempered glass side panel, and a carbon fiber style front panel, offering a modern aesthetic for your gaming setup.

Le caratteristiche principali includono:

• Illuminazione RGB dinamica: 13 preset lighting modes, including 6 RGB flow modes and 7 static color modes, controllable via an LED button.
• Pannello laterale in vetro temperato: A full tempered glass side panel allows for a clear view dei tuoi componenti interni.
• Raffreddamento ottimizzato: Supports air cooling configurations with optional fan placements at the front (2x 120mm), top (2x 120mm), and rear (1x 120mm included). Liquid cooling support for 120mm radiators at the front and rear.
• Design futuristico: Carbon fiber style front panel for a sleek and modern appearance.

2. Configurazione e installazione

This section provides guidance on setting up your AeroCool Bolt Mini case and installing components.

2.1 Dimensioni fisiche e compatibilità

• Dimensioni (LxWxH): Circa 15.43 x 7.91 x 14.96 pollici (39.2 x 20.1 x 38.0 cm).
• Compatibilità della scheda madre: Supports Mini-ITX and Micro-ATX motherboards.
• Power Supply Mounting: Bottom mount.

2.2 Installazione dei componenti

Prima di iniziare l'installazione, assicurati di avere a disposizione tutti i componenti e gli strumenti necessari. Consulta i manuali della scheda madre e dei componenti per istruzioni di installazione specifiche.

Figura 2.1: Anteriore sinistro view of the AeroCool Bolt Mini case, showcasing the tempered glass side panel and the RGB LED strip on the front.

Figura 2.2: Interno view of the AeroCool Bolt Mini case, showing the motherboard mounting area, drive bays, and the pre-installed rear fan.

Figura 2.3: Anteriore e posteriore view of the AeroCool Bolt Mini case, highlighting the carbon fiber style front panel and the rear I/O and fan mounting.

Figura 2.4: Superiore view of the AeroCool Bolt Mini case, showing the front I/O panel with USB ports and audio jacks.

2.2.1 Installazione della scheda madre

1. Rimuovere i pannelli laterali.
2. Installare la schermatura I/O nell'apertura posteriore del case.
3. Align your Micro-ATX or Mini-ITX motherboard with the standoffs and gently place it into position.
4. Fissare la scheda madre con le viti.

2.2.2 Installazione dell'unità di archiviazione

The case supports various storage configurations. Refer to the internal layout for specific drive bay locations.

2.2.3 Installazione dell'alimentatore

Install your ATX power supply into the bottom mounting area of the case. Secure it with screws from the rear.

2.2.4 Installazione del sistema di raffreddamento

The case comes with one 120mm black fan pre-installed at the rear. Additional fans or radiators can be installed as follows:

• Davanti: Supports 2 x 120mm fans or a 120mm radiator.
• Superiore: Supporta 2 ventole da 120 mm.
• Posteriore: Supports 1 x 120mm fan (included) or a 120mm radiator.

3. Istruzioni per l'uso

3.1 I/O del pannello frontale

The top front panel provides convenient access to essential ports and controls:

• Pulsante di accensione: Per accendere o spegnere il sistema.
• Pulsante di reset: Per riavviare il sistema.
• Porte USB: Includes USB 2.0 ports for connecting peripherals.
• Jack audio: Per cuffie e microfono.

3.2 Controllo dell'illuminazione RGB

The AeroCool Bolt Mini features an integrated RGB LED strip on the front panel with 13 lighting modes. These modes can be cycled using the dedicated LED control button located on the top panel.

• 6 RGB Flow Modes: Dynamic lighting effects that cycle through colors.
• 7 Static Color Modes: Solid color illumination (e.g., Red, Green, Blue, Yellow, Cyan, Purple, White).

Press the LED control button repeatedly to cycle through the available lighting modes. Hold the button for a few seconds to turn off the RGB lighting.

4. Manutenzione

Una manutenzione regolare contribuisce a garantire la longevità e le prestazioni ottimali del case e dei componenti del PC.

4.1 Pulizia della custodia

• Esterno: Utilizzare un morbido, damp panno per pulire le superfici esterne. Evitare detergenti abrasivi o solventi.
• Pannello in vetro temperato: Clean the tempered glass with a glass cleaner and a microfiber cloth to prevent streaks. Do not apply excessive force.
• Filtri antipolvere: Periodically remove and clean any dust filters (e.g., top magnetic filter, PSU filter) to maintain good airflow. Rinse with water if necessary and ensure they are completely dry before reinstallation.
• Interno: Use compressed air to blow out dust from inside the case, especially around fans and components. Ensure the system is powered off and unplugged before cleaning the interior.

5. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti riscontrare con il case del tuo PC.

5.1 RGB Lighting Not Functioning

• Controllare le connessioni: Ensure the RGB LED strip is properly connected to the case's internal controller and that the controller is powered (usually via a SATA power connector from your PSU).
• Pulsante LED: Press the LED control button to cycle through modes. If it's unresponsive, check the button's internal connection to the controller.
• Ciclo di alimentazione: Turn off your PC, unplug it from the wall, wait 30 seconds, then plug it back in and restart.

5.2 Flusso d'aria scarso o surriscaldamento

• Pulire i filtri antipolvere: Ensure all dust filters are clean and not obstructed.
• Orientamento della ventola: Verify that installed fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
• Gestione dei cavi: Una cattiva gestione dei cavi può ostruire il flusso d'aria. Se possibile, riposizionare i cavi dietro il vassoio della scheda madre.
• Add More Fans: Consider installing additional fans in available mounting locations to improve cooling.

5.3 Le porte del pannello frontale non funzionano

• Check Motherboard Connections: Ensure the USB and audio headers from the front panel are securely connected to the correct pins on your motherboard.
• Problemi con i driver: For audio, ensure your motherboard's audio drivers are up to date.

6. Specifiche

7. Garanzia e supporto

AeroCool products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official AeroCool websito.

For technical support, troubleshooting assistance, or inquiries regarding your AeroCool Bolt Mini case, please contact AeroCool customer service through their official support channels.

Produttore: Aerocool

Marca: AeroCool