Rocketfish RF-HTLF23

Manuale di istruzioni per il supporto da parete per TV completamente girevole Rocketfish

Model: RF-HTLF23

Prodotto finitoview

The Rocketfish Full-Motion TV Wall Mount (Model RF-HTLF23) is designed to securely mount most 40-inch to 75-inch televisions, supporting weights up to 100 lbs. This mount offers versatile viewing options with its full-motion capabilities, including swivel, tilt, and an articulating arm, allowing you to adjust your TV for optimal viewing comfort from various positions in your room. It also features built-in wire management to help keep your entertainment area tidy.

Rocketfish Full-Motion TV Wall Mount

Image: The Rocketfish Full-Motion TV Wall Mount, showcasing its robust articulating arm and wall plate design.

Configurazione e installazione

Proper installation is crucial for the safety and stability of your television. It is recommended to have two people for installation. Ensure you have the necessary tools before beginning.

Strumenti necessari:

  • Trova stud
  • Livello
  • Forare con punte adeguate
  • Chiavi (varie misure)
  • Matita
  • Nastro di misurazione

Fasi di installazione (linee guida generali):

  1. Individuare i montanti della parete: Use a stud finder to locate and mark the center of two adjacent wall studs where you intend to mount the TV. Ensure the studs are strong enough to support the weight of the mount and your TV.
  2. Segnare i fori di perforazione: Hold the wall plate of the mount against the wall, aligning it with the marked studs. Use a level to ensure it is perfectly horizontal. Mark the pilot hole locations.
  3. Praticare i fori pilota: Drill pilot holes at the marked locations. Ensure the drill bit size matches the recommendations in the detailed installation guide provided with your product.
  4. Fissare la piastra a muro: Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly.
  5. Fissare le staffe TV: Attach the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.
  6. Montaggio della TV sulla piastra a muro: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Secure the TV to the wall plate using the locking mechanisms or screws as per the detailed instructions.
  7. Regola e livella: Once mounted, make any necessary leveling adjustments.
Compatibility diagram for Rocketfish TV mount

Image: Diagram illustrating the compatibility of the mount with TVs ranging from 40 to 75 inches and supporting up to 100 lbs.

Funzionamento del supporto

The Rocketfish Full-Motion TV Wall Mount provides extensive flexibility to optimize your viewesperienza di acquisizione.

Articulating Arm:

The mount features a robust articulating arm that allows you to extend your TV up to 25.2 inches from the wall. This extension provides ample space to angle your TV as needed.

Articulating arm capabilities of Rocketfish TV mount

Image: Illustration of the 23-inch articulating arm, demonstrating its tilt, swivel, leveling, and depth adjustment capabilities.

Funzione girevole:

You can swivel your TV up to 50 degrees left or right, depending on the TV size and wall clearance. This feature is ideal for viewing from different seating areas within a room.

Swivel motion of Rocketfish TV mount

Image: Diagram showing the range of motion for the full-motion TV wall mount, illustrating how the TV can be angled for various viewposizioni di avanzamento.

Tilt Function (Virtual Axis Technology):

Utilize the Virtual Axis tilt technology to adjust the vertical viewing angle from +5 to -15 degrees. This helps reduce glare and provides a comfortable viewing angle, especially when the TV is mounted higher on the wall.

Gestione dei cavi:

The mount includes built-in wire management channels. Route your cables through these channels to keep them organized and out of sight, contributing to a clean and professional appearance.

Built-in wire management feature

Immagine: Lato view of the TV mount showing how cables can be concealed within the arm for a tidy setup.

Manutenzione

To ensure the longevity and safe operation of your Rocketfish TV wall mount, follow these simple maintenance guidelines:

  • Ispezione regolare: Periodically check all mounting bolts and screws to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen.
  • Pulizia: Spolverare regolarmente la montatura con un panno morbido e asciutto. Per i segni ostinati, un panno leggermenteamp è possibile utilizzare un panno, ma evitare prodotti chimici aggressivi o detergenti abrasivi che potrebbero danneggiare la finitura.
  • Controllo del movimento: Occasionally move the articulating arm, swivel, and tilt mechanisms through their full range of motion to ensure smooth operation. If any stiffness is noted, do not force it.
  • Limite di peso: Always ensure that the total weight of your TV and any attached accessories does not exceed the mount's maximum weight capacity of 100 lbs.

Risoluzione dei problemi

If you encounter issues with your Rocketfish TV wall mount, consider the following common troubleshooting steps:

  • TV non a livello: If your TV appears unlevel after installation, check the leveling adjustments on the mount. Ensure the wall plate was installed perfectly level. Some mounts offer post-installation leveling adjustments.
  • Mount Feels Loose/Wobbly: Immediately re-check all wall mounting bolts and TV attachment screws. Ensure they are securely tightened. Verify that the wall studs are solid and capable of supporting the load. If mounted into drywall with anchors, ensure the anchors are rated for the weight and properly installed.
  • Difficulty Moving Arm/Swivel/Tilt: Ensure no cables are snagged or obstructing the movement. Check for any debris in the joints. Do not apply excessive force. If the movement is consistently stiff, consult the manufacturer's support.
  • Cables Not Concealing Properly: Ensure cables are routed correctly through the designated channels. Avoid overfilling the channels, which can prevent proper closure or movement.
  • Mounting Surface Concerns: This mount is designed for wood stud or concrete wall installation. If you are attempting to install on a different surface (e.g., metal studs, plaster), ensure you are using appropriate anchors and techniques, or consult a professional installer.

Specifiche

CaratteristicaDettaglio
MarcaRocketfish
Numero di modelloRF-HTLF23
Dimensioni TV compatibiliLa maggior parte dei televisori da 40" a 75"
Capacità massima di peso100 libbre (45.36 kg)
Tipo di movimentoSwivel, Tilt, Articulating
Estensione massima dalla parete25.2 pollici
Angolo di rotazioneUp to 50 degrees (left/right)
Angolo di inclinazione+5 to -15 degrees (Virtual Axis Technology)
MaterialeMetallo
Dimensioni del prodotto (piegato)27.76 x 16.34 x 2.95 pollici
Peso dell'articolo22.5 libbre
Codice UPC600603253249

Garanzia e supporto

For detailed warranty information, please refer to the warranty card included with your product or visit the official Rocketfish webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.

For technical support, product registration, or to view frequently asked questions, please visit the Rocketfish brand store or contact their customer service directly.

Rocketfish Brand Store: Visit Rocketfish Store on Amazon

Nota sui video: No official seller videos with relevant content and creator type "Seller" were available for embedding in this manual.

Documenti correlati - RF-HTLF23

Preview Rocketfish TV Wall Mount Installation Template Guide
This guide provides instructions and a template for installing a Rocketfish full-motion TV wall mount for most 40" - 75" TVs. It includes steps for mounting on wood stud walls and concrete walls, with required tools and measurements.
Preview Rocketfish 40" to 75" TV Wall Mount - Full Motion (RF-HTLF23) Assembly Guide
Comprehensive assembly and installation guide for the Rocketfish RF-HTLF23 Full Motion TV Wall Mount. This guide covers safety precautions, specifications, tools, package contents, hardware details, and step-by-step instructions for mounting TVs from 40 to 75 inches onto wood studs or concrete walls. Includes warranty information.
Preview Rocketfish RF-HTLF23 Supporto da parete per TV di movimento completo
Guida di installazione e assemblaggio per il supporto del pannello Rocketfish RF-HTLF23, compatibile con televisori da 40 a 75 pollici. Include specifiche, strumenti richiesti e passaggi dettagliati.
Preview Rocketfish RF-HTLF23 40" to 75" Full Motion TV Wall Mount Assembly Guide
This guide provides step-by-step instructions for assembling and installing the Rocketfish RF-HTLF23 full-motion TV wall mount, designed for TVs from 40 to 75 inches. It includes safety instructions, tools needed, package contents, and detailed installation procedures for both wood stud and concrete walls.
Preview Rocketfish RF-HTLF23 Full-Motion TV Wall Mount Assembly Guide
Comprehensive assembly and installation guide for the Rocketfish RF-HTLF23 Full-Motion TV Wall Mount, suitable for 40-75 inch TVs. Includes safety instructions, parts list, tools required, and step-by-step instructions for mounting on wood studs or concrete walls.
Preview Istruzioni di montaggio del supporto da parete per TV completamente girevole Rocketfish RF-HTLF23
Istruzioni di montaggio complete per il supporto da parete per TV completamente girevole Rocketfish RF-HTLF23, che comprendono specifiche, strumenti, componenti, fasi di installazione per pareti con montanti in legno e cemento e informazioni sulla garanzia.