Scout Rectangular Blue Digital Alarm Clock Model 280001026 User Manual

Introduzione

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Scout Rectangular Blue Digital Alarm Clock, Model 280001026. Please read this manual carefully before using the device to ensure proper function and longevity.

The Scout alarm clock features a unique design where rotating the clock activates or deactivates the alarm. It includes a precise alarm time adjustment, a light button for night illumination, and a snooze function. A twilight switch allows for continuous display illumination at night.

Contenuto della confezione

• Scout Rectangular Blue Digital Alarm Clock
• Manuale dell'utente (questo documento)

Nota: le batterie non sono incluse e devono essere acquistate separatamente.

Impostare

1. Installazione della batteria

1. Individuare il vano batterie sul retro della sveglia.
2. Aprire il coperchio del vano batterie.
3. Insert the required batteries (e.g., 2x AA, check specifications) according to the polarity indicators (+/-).
4. Chiudere saldamente il coperchio del vano batterie.

2. Impostazione dell'ora

1. On the back of the alarm clock, locate the time setting controls (usually a dial or buttons).
2. Adjust the time to the current hour and minute.

3. Impostazione dell'ora della sveglia

1. Locate the alarm setting controls on the back of the alarm clock.
2. Adjust the alarm time to your desired wake-up time.

Istruzioni per l'uso

Attivazione e disattivazione dell'allarme

The Scout alarm clock features a unique rotation mechanism to control the alarm function.

Image: This composite image illustrates how to activate and deactivate the alarm. When the side marked "AN" (ON) is facing up, the alarm is active. When the side marked "AUS" (OFF) is facing up, the alarm is deactivated. The middle section shows the clock being rotated to switch between these states.

• A activate the alarm, rotate the alarm clock so that the side marked "AN" (ON) is facing upwards. The display will show the current time and the set alarm time.
• A deactivate the alarm, rotate the alarm clock so that the side marked "AUS" (OFF) is facing upwards. The alarm icon will disappear from the display.

Funzione snooze

Quando suona la sveglia, premere il tasto POSTICIPARE button (located on the top of the clock) to temporarily silence the alarm. The alarm will sound again after a short interval (typically 5-10 minutes).

Display Illumination (Light Button)

Premere il tasto LEGGERO (LIGHT) button (located on the top of the clock) to illuminate the display for a few seconds, allowing you to view il tempo trascorso al buio.

Permanent Night Illumination (Twilight Switch)

On the back of the alarm clock, locate the twilight switch. This switch allows you to enable or disable permanent display illumination during nighttime hours. When enabled, the display will automatically light up dimly in low-light conditions.

Manutenzione

• Clean the alarm clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the alarm clock to extreme temperatures, direct sunlight, or high humidity.
• If the display becomes dim or the alarm function is inconsistent, replace the batteries.
• Do not attempt to disassemble the alarm clock, as this may void the warranty and cause damage.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

For warranty information or technical support, please refer to the official Scout websito o contatta il tuo rivenditore. Conserva la ricevuta d'acquisto come prova d'acquisto.

Per ulteriore assistenza, puoi visitare il Scout brand page on Amazon.