LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Introduzione

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente le presenti istruzioni di sicurezza prima dell'installazione e dell'uso. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.

• Installazione professionale: L'installazione deve essere effettuata da un elettricista qualificato, nel rispetto di tutte le normative elettriche locali e nazionali.
• Disconnessione dell'alimentazione: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
• Voltage: Garantire la fornitura voltage matches the device's requirements (230 Volt AC).
• Condizioni ambientali: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Modifica: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• 1x LEDVANCE 360DEG Wall Sensor device

4. Caratteristiche del prodotto

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Configurazione e installazione

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Figura 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Figura 5.2: Avvicinamento view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Posizione di montaggio

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Collegamento elettrico

• AVVERTIMENTO: Scollegare l'alimentazione prima di effettuare qualsiasi collegamento elettrico.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Istruzioni per l'uso

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

Modalità operative 6.1

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Impostazioni di rilevamento

The sensor allows for adjustment of the light duration after detection:

• Durata della luce: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Manutenzione

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Pulizia: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• Ispezione: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. Risoluzione Dei Problemi

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• La luce non si accende:
  • Controllare che l'alimentazione sia collegata e attiva.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Assicurarsi che l'area di rilevamento sia libera da ostacoli.
  • Adjust the sensitivity settings if available.
• La luce rimane accesa ininterrottamente:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• La luce si accende inaspettatamente:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti o un elettricista qualificato.

9. Specifiche

10. Garanzia e supporto

The LEDVANCE 360DEG Wall Sensor comes with a Garanzia del produttore di 3 anni dalla data di acquisto, coprendo i difetti di materiali e di fabbricazione in condizioni di normale utilizzo.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the Negozio del marchio LEDVANCE.

Si prega di conservare la prova d'acquisto ai fini della garanzia.