Introduzione
The CAD Audio GXL1800SP Studio Pack provides a versatile microphone solution for studio recording, podcasting, and streaming. This pack includes two distinct condenser microphones: the GXL1800 large-format side-address microphone and the GXL800 small-diaphragm microphone. The GXL1800 is designed to capture performances with a smooth and articulate sound profile, offering high sensitivity for various miking techniques and a cardioid polar pattern to minimize off-axis noise. The GXL800 delivers a class-leading transient response, accurately reproducing vocals and instruments. This manual provides essential information for the proper setup, operation, and maintenance of your GXL1800SP Studio Pack.
Contenuto della confezione
Verify that all items listed below are included in your GXL1800SP Studio Pack:
- 1 x GXL1800 Side-Address Condenser Microphone
- 1 x GXL800 Small-Diaphragm Condenser Microphone
- 1 x Studio Grade Shock Mount (for GXL1800)
- 1 x Microphone Clip (for GXL800)
- 2 cavi XLR
- 1 x parabrezza in schiuma

The CAD Audio GXL1800SP Studio Pack includes the GXL1800 large-diaphragm condenser microphone, the GXL800 small-diaphragm condenser microphone, a shock mount, a foam windscreen, and two XLR cables.
Istruzioni di installazione
- Montaggio dei microfoni:
- For the GXL1800, attach the included studio-grade shock mount to a microphone stand. Carefully secure the GXL1800 into the shock mount.
- For the GXL800, attach the included microphone clip to a microphone stand. Secure the GXL800 into the clip.
- Collegamento all'interfaccia audio/mixer:
- Use the provided XLR cables to connect each microphone to an audio interface or mixer.
- Ensure your audio interface or mixer can supply Alimentazione phantom 48V. Both the GXL1800 and GXL800 are condenser microphones and require phantom power to operate.
- Positioning the Microphones:
- Position the GXL1800 for vocals or instruments, typically 6-12 inches from the sound source, aiming the side of the microphone towards the source.
- Position the GXL800 for instruments or detailed sound capture, aiming the top of the microphone towards the source.
- Utilize the foam windscreen to reduce plosives and breath noise, especially for vocal applications.

The GXL1800 large-diaphragm condenser microphone is designed for capturing vocals and instruments with clarity.

The GXL800 small-diaphragm condenser microphone is suitable for instruments and detailed sound capture.
Utilizzo dei microfoni
Both the GXL1800 and GXL800 are condenser microphones known for their sensitivity and detailed sound capture. Proper operation involves understanding their characteristics:
- Potenza fantasma: Always ensure 48V phantom power is supplied by your audio interface or mixer before use. Failure to do so will result in no sound output.
- Diagramma polare: Both microphones feature a unidirectional (cardioid) polar pattern. This means they are most sensitive to sound coming from the front and reject sound from the sides and rear. Position the microphones accordingly to capture the desired sound source and minimize unwanted ambient noise.
- Sensibilità: Condenser microphones are highly sensitive. They will pick up subtle nuances but also environmental sounds. Operate in a quiet environment to achieve optimal recording quality. Avoid handling the microphones directly during recording to prevent unwanted noise transmission through the stand.
- Guadagno Stagin: Adjust the gain on your audio interface or mixer carefully. Start with a low gain setting and gradually increase it until you achieve a strong signal without clipping (distortion).

The GXL1800 microphone can be used for miking various instruments, including drums, to capture their natural sound.
Manutenzione
Proper care ensures the longevity and performance of your CAD Audio microphones:
- Pulizia: Use a soft, dry cloth to wipe down the microphone bodies. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
- Magazzinaggio: When not in use, store the microphones in a protective case or bag to prevent dust accumulation and physical damage. Avoid exposing them to extreme temperatures, high humidity, or direct sunlight.
- Gestione: Always handle microphones with care. Avoid dropping them or subjecting them to strong impacts, which can affect their delicate internal capsules.
Risoluzione dei problemi
If you encounter issues with your GXL1800SP Studio Pack, refer to the following common problems and solutions:
- Nessuna uscita audio:
- Ensure 48V phantom power is enabled on your audio interface or mixer.
- Check all XLR cable connections for security and proper insertion.
- Verify that the input gain on your audio interface/mixer is not set to minimum.
- Test with a different XLR cable to rule out cable malfunction.
- Ronzio o rumore di ronzio:
- Assicurarsi che tutti i cavi siano adeguatamente schermati e collegati.
- Check for nearby electronic devices (e.g., computers, monitors, power supplies) that might be causing electromagnetic interference. Try moving the microphone or the interfering device.
- Verify that your audio interface/mixer is properly grounded.
- Suono distorto:
- Reduce the input gain on your audio interface or mixer. The signal may be too strong, causing clipping.
- Increase the distance between the microphone and the sound source if the source is excessively loud.
- Basso livello di uscita:
- Aumenta il guadagno in ingresso sulla tua interfaccia audio o sul tuo mixer.
- Ensure the microphone is properly aimed at the sound source.
Specifiche
| Numeri di modello | GXL1800SP (AMS-GXL-1800SP) |
| Tipi di microfono inclusi | GXL1800 Large-Format Side-Address Condenser, GXL800 Small-Diaphragm Condenser |
| Modello polare | Unidirezionale (cardioide) |
| Tecnologia di connettività | XLR |
| Tipo di connettore | XLR |
| Fonte di alimentazione | Alimentazione Phantom 48V (elettrica con cavo) |
| Signal-to-Noise Ratio | 78 dB |
| Numero di canali | 1 |
| Peso dell'articolo | 2 libbre (pacchetto totale) |
| Dimensioni del prodotto (L x P x A) | 7.28 x 3.15 x 12 pollici |
| Codice UPC | 631922109160 |
Garanzia e supporto
CAD Audio products are manufactured to high-quality standards. For specific warranty information regarding your GXL1800SP Studio Pack, please refer to the warranty card included with your purchase or visit the official CAD Audio website. For technical support, product registration, or service inquiries, please contact CAD Audio customer support directly through their official channels.
Official CAD Audio Websito: www.cadaudio.com





