Manuale d'uso dell'antenna a lunga distanza UHF Televes 149721 DAT BOSS LR

1. Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Televes 149721 DAT BOSS LR UHF Long-Distance Antenna. This antenna is designed for optimal terrestrial television reception, specifically within the UHF band. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

The Televes DAT BOSS LR antenna incorporates advanced technology to enhance signal reception, particularly in challenging environments or for long-distance signal acquisition. Its design focuses on maximizing gain and minimizing interference, including LTE700 filtering.

2. Informazioni sulla sicurezza

Durante l'installazione e il funzionamento, osservare sempre le seguenti precauzioni di sicurezza:

• Installazione professionale consigliata: Antenna installation, especially on rooftops or tall structures, can be hazardous. It is highly recommended to seek assistance from a qualified professional installer.
• Avoid Power Lines: Never install the antenna near overhead power lines or other electrical circuits. Contact with power lines can be fatal.
• Montaggio stabile: Ensure the antenna is securely mounted to a stable structure that can withstand wind and other environmental factors.
• Messa a terra: Properly ground the antenna mast and lead-in wire according to local electrical codes to protect against lightning strikes.
• Condizioni meteo: Do not attempt installation during adverse weather conditions such as strong winds, rain, or lightning.
• Utilizzare Strumenti Appropriati: Use only insulated tools and wear appropriate safety gear, including gloves and eye protection.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• Televes 149721 DAT BOSS LR UHF Antenna (main unit)
• Mounting hardware (mast clamp, bolts, nuts, washers)
• Manuale di istruzioni (questo documento)
• Note: Coaxial cable and mast are typically sold separately.

4. Assemblaggio

The Televes DAT BOSS LR antenna is designed for straightforward assembly. Follow these steps:

1. Disimballare i componenti: Rimuovere con cautela tutte le parti dalla confezione.
2. Extend Elements: The antenna elements may be folded for shipping. Gently extend and lock them into their operational positions. Refer to the diagrams for correct orientation.
3. Attach Reflector (if separate): If the reflector grid is separate, attach it to the main boom using the provided hardware. Ensure it is securely fastened.
4. Montaggio Clamp Montaggio: Assemble the mast clamp onto the antenna's mounting point. Do not fully tighten yet, as adjustments may be needed during installation.

Figure 1: Partially assembled Televes DAT BOSS LR antenna, illustrating the folded elements and the mounting bracket. This view helps in understanding the initial assembly steps.

5. Configurazione e installazione

Proper installation is crucial for optimal performance. Consider the following:

1. Selezione della posizione: Choose a mounting location that provides a clear line of sight to the broadcast towers. Higher elevations are generally better. Avoid obstructions like buildings, trees, or hills.
2. Montaggio dell'antenna:
   • Securely attach the antenna to a sturdy mast using the provided mounting hardware.
   • Ensure the antenna is level and oriented correctly.
   • Tighten all bolts firmly to prevent movement in windy conditions.
3. Collegamento del cavo coassiale:
   • Connect a high-quality 75-ohm coaxial cable (RG6 recommended) to the antenna's F-connector.
   • Ensure the connection is tight and weatherproof. Use weatherproof tape or a rubber boot if not already integrated.
   • Route the cable carefully, avoiding sharp bends and securing it to the mast and structure to prevent damage.
4. Connecting to TV/Receiver:
   • Connect the other end of the coaxial cable to the "Antenna In" or "RF In" port on your television or digital TV receiver/tuner.
   • If using a signal amplifier or distribution amplifier, connect the antenna to the input of the amplificatore, e il amplifier output to your TV(s).
5. Puntamento dell'antenna:
   • Use an online tool or a compass to determine the direction of your local broadcast towers.
   • Aim the front (narrow end) of the antenna directly towards the primary broadcast towers.
   • Fine-tune the direction while monitoring signal strength on your TV or a signal meter for optimal reception.

Figure 2: The Televes DAT BOSS LR antenna fully assembled. This image provides a complete view of the antenna's structure, useful for verifying correct assembly and understanding its directional nature for aiming.

6. Operating the Antenna (Tuning)

Once the antenna is installed and connected, perform a channel scan on your television or digital TV receiver:

1. Access TV Menu: Navigate to your TV's or receiver's menu.
2. Select "Antenna" or "Air" Input: Assicurati che il televisore sia impostato sulla sorgente di ingresso corretta.
3. Initiate Channel Scan: Look for options like "Channel Scan," "Auto Program," or "Auto Tune" in the setup or channel settings menu.
4. Risultati del monitoraggio: The TV will scan for available channels. This process may take several minutes.
5. Fine-Tuning (if necessary): If certain channels are missing or have poor reception, try slightly adjusting the antenna's direction and re-running the channel scan.

The DAT BOSS LR antenna features a built-in BOSS Tech system (Balanced Output Signal System) which automatically adjusts the output level to optimize reception. This intelligent system helps prevent signal overload and ensures a stable signal quality.

7. Manutenzione

The Televes DAT BOSS LR antenna is designed for durability and requires minimal maintenance. However, periodic checks can ensure long-term performance:

• Ispezione visiva: Annually inspect the antenna, mast, and mounting hardware for any signs of corrosion, damage, or loosening.
• Integrità del cavo: Check the coaxial cable for cracks, fraying, or damage to the outer jacket. Ensure all connections remain tight and weatherproof.
• Rimozione detriti: Remove any accumulated leaves, branches, or other debris that might obstruct the antenna elements.
• Pulizia: If necessary, gently clean the antenna with a soft cloth and mild detergent. Avoid abrasive cleaners or high-pressure water.

Avvertimento: Always exercise extreme caution when working at heights. If you are uncomfortable or unqualified, hire a professional for maintenance.

8. Risoluzione Dei Problemi

Se riscontri problemi con l'antenna, prendi in considerazione i seguenti passaggi per la risoluzione dei problemi:

9. Specifiche

Technical specifications for the Televes 149721 DAT BOSS LR UHF Antenna:

• Modello: 149721 DAT-75 T-FORCE 5G LTE HD BOSS LR
• Tipo di antenna: UHF Terrestrial Antenna
• Gamma di frequenza:
  • Band 1: 470 - 606 MHz (Channels 21-37)
  • Band 2: 606 - 694 MHz (Channels 38-48)
• Canali: 21 - 48
• Guadagno massimo: 47 dB (with BOSS Tech active)
• Lunghezza: Circa 1.8 metri
• Impedenza: 75 Ohm
• LTE Filtering: Integrated LTE700 (5G) filtering
• Colore: Argento
• Produttore: TELEVETE

10. Garanzia e supporto

For warranty information and technical support, please refer to the official Televes website or contact your local Televes distributor. Keep your purchase receipt as proof of purchase for any warranty claims.

Risorse online: Visit the official Televes websito per ulteriori informazioni sui prodotti, FAQ e risorse di supporto.