1. Prodotto finitoview
The PINEWORLD E202PRO is a versatile smart lock designed for keyless entry, offering multiple access methods including fingerprint, keypad, and remote control via a mobile application. It integrates WiFi and Bluetooth connectivity for enhanced management and convenience, suitable for residential, commercial office, and apartment settings. The lock features a reversible handle for flexible installation.
Figure 1.1: PINEWORLD E202PRO Smart Lock (Front and Back)
Figure 1.2: Key Features of the E202PRO Smart Lock, including touchscreen code unlock, RFID card support, door bell function, one-button fingerprint, handle reverse, anti-bolt, low power alert, USB power, and hidden mechanical key access.
2. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Front Lock Assembly
- Back Lock Assembly
- Corpo serratura da infilare
- Piastra di montaggio
- Viti e ferramenta per l'installazione
- Tasti meccanici (2)
- Carte RFID (2)
- Manuale utente (stampato)
- Modello di foratura
Figura 2.1: Contenuto completo della confezione
3. Configurazione e installazione
Proper installation is crucial for the smart lock's functionality and security. Ensure your door's thickness is compatible (40mm-120mm or 1½"-4¾") and the backset is 2 inches (50mm).
Figure 3.1: Door Dimensions and Lock Size Compatibility
Fasi di installazione:
- Prepara la porta: Use the provided drilling template to mark and drill the necessary holes on your door.
- Install the Mortise Lock Body: Insert the mortise lock into the prepared mortise pocket on the door edge and secure it with screws. Ensure the deadbolt direction is correct for your door's swing.
- Install the Front Lock Assembly: Route the cable from the front lock through the door and align the spindle with the mortise lock. Secure the front assembly.
- Install the Back Lock Assembly: Connect the cable from the front assembly to the back assembly. Align the back assembly with the spindle and secure it to the door using the mounting plate and screws.
- Funzionalità di prova: Before fully tightening all screws, test the handle operation from both sides and ensure the deadbolt extends and retracts smoothly.
4. Istruzioni per l'uso
Metodi di accesso:
- Impronta digitale: Place your registered fingerprint on the sensor to unlock.
- tastiera: Enter your programmed passcode on the touchscreen keypad.
- Carta RFID: Tap your registered RFID card on the designated area to unlock.
- Applicazione mobile: Use the PINEWORLD mobile application (available for iOS and Android) to remotely unlock the door via Bluetooth or WiFi.
- Chiave meccanica: In case of emergency or battery depletion, use the physical mechanical key to unlock.
Gestione delle app:
The mobile application allows for comprehensive management of your smart lock, including adding/deleting users, viewing access logs, and receiving real-time notifications.
Figure 4.1: App Notifications for Door State and Access Logs
Figure 4.2: Apartment Management System Integration via App
5. Manutenzione
- Sostituzione della batteria: The lock is powered by AA batteries (not included). Replace all batteries when the low power alert is triggered.
- Pulizia: Wipe the lock surface with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish or electronic components.
- Lubrificazione: Periodically check the mortise lock body for smooth operation. If needed, apply a small amount of graphite lubricant to the latch and deadbolt mechanisms.
6. Risoluzione Dei Problemi
Problemi comuni e soluzioni:
- Il lucchetto non risponde: Check battery levels. If batteries are low or depleted, replace them.
- Handle not engaging/unlocking: This can sometimes be caused by a dislodged internal pin or spring mechanism.
- Impronta digitale non riconosciuta: Assicurati che il dito sia pulito e asciutto. Registra nuovamente l'impronta digitale se il problema persiste.
- La tastiera non risponde: Check for power. Clean the keypad surface.
- Problemi di connettività dell'app: Ensure Bluetooth is enabled on your phone and you are within range. For WiFi, ensure your router is 2.4GHz compatible and the lock is properly configured.
Video sulla risoluzione dei problemi:
Video 6.1: Repair your Lock - This video demonstrates how to access and potentially repair internal components of the lock if the handle is not engaging properly. It shows the internal pin and spring mechanism that can become dislodged, preventing the lock from operating.
Video 6.2: This is after four years - A long-term review and troubleshooting guide showing how to address common wear-and-tear issues with the lock's internal mechanisms.
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | PINEWORD |
| Numero di modello | E202PRO |
| Tipo di blocco | Biometrico |
| Caratteristiche speciali | Fingerprint, Smart Lock, WiFi |
| Protocollo di connettività | Bluetooth |
| Tipo di controllore | iOS, Android |
| Dimensioni articolo (L x P x A) | 10.63 x 2.56 x 1.02 pollici |
| Peso dell'articolo | 5.79 libbre |
| Usi consigliati | Residential, Commercial (Office) |
| Stile | Moderno |
8. Garanzia e supporto
Specific warranty details are not provided in the product data. For warranty claims, technical support, or any questions regarding your PINEWORLD E202PRO Smart Lock, please contact PINEWORLD customer service directly.
Refer to the official PINEWORLD website or your purchase documentation for the most up-to-date contact information and warranty policy.
