iFixit iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

iFixit Home Button Replacement Manual

Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020

1. Introduzione

This manual provides detailed instructions for replacing the home button on compatible iPhone models. This replacement part restores all home button functions, excluding Touch ID functionality. Touch ID is uniquely paired to the original logic board and cannot be restored with a replacement home button.

For optimal results, it is recommended to have prior experience with small electronics repair or to seek professional assistance.

2. Informazioni sulla sicurezza

Please read and understand all safety precautions before beginning the repair process.

  • Dispositivo di spegnimento: Always ensure your iPhone is completely powered off before starting any repair.
  • Scollegare la batteria: Disconnect the battery as early as possible in the repair process to prevent accidental short circuits.
  • Scarica statica: Use an anti-static wrist strap or work on an anti-static mat to prevent electrostatic discharge (ESD), which can damage sensitive electronic components.
  • Maneggiare con cura: Electronic components are fragile. Handle them gently and avoid excessive force.
  • Piccole parti: Keep track of all screws and small parts. Using a magnetic mat or labeled containers is highly recommended.
  • Protezione degli occhi: Consider wearing eye protection to guard against small flying debris.

3. Prodotto finitoview

The iFixit Home Button replacement part is designed to restore the physical click and home button functionality of your compatible iPhone.

Davanti view of the iFixit replacement home button

Figura 3.1: Davanti view of the iFixit replacement home button, showing the black circular button and the flexible circuit board.

Indietro view of the iFixit replacement home button

Figura 3.2: Indietro view of the iFixit replacement home button, revealing the internal circuitry and connector.

Caratteristiche principali:

  • Restores home button click functionality.
  • Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020.
  • Does NOT restore Touch ID functionality.

4. Guida all'installazione

This section outlines the general steps for replacing the home button. Specific disassembly steps may vary slightly between iPhone models. Refer to detailed repair guides for your specific iPhone model on the iFixit webposto (www.ifixit.com) for comprehensive, step-by-step visual instructions.

Strumenti richiesti (non inclusi):

  • Cacciavite pentalobo
  • Cacciavite Phillips
  • Tri-point screwdriver
  • Spatola
  • scelte di apertura
  • Ventosa
  • Pinzette
  • Heat gun or hairdryer (optional, for adhesive softening)
iFixit repair tools kit with various screwdrivers and opening tools

Figura 4.1: Example of an iFixit repair kit containing various tools necessary for electronics repair.

Passaggi generali di installazione:

  1. Preparare l'area di lavoro: Ensure a clean, well-lit, and static-free environment.
  2. Power Off iPhone: Completely shut down your iPhone.
  3. Remove Pentalobe Screws: Remove the two pentalobe screws located at the bottom edge of the iPhone, next to the charging port.
  4. Open Display Assembly: Carefully open the display assembly. This usually involves using a suction cup and opening picks to separate the display from the frame. Be aware of adhesive and delicate cables.
  5. Scollegare la batteria: Locate and disconnect the battery connector to prevent power flow during the repair.
  6. Disconnect Display Cables: Disconnect all display and digitizer cables from the logic board.
  7. Remove Display Assembly: Carefully remove the entire display assembly from the iPhone body.
  8. Access Home Button: On the back of the display assembly, locate the home button bracket and screws. Remove them.
  9. Disconnect Home Button Cable: Carefully disconnect the home button flex cable from the display assembly.
  10. Remove Old Home Button: Gently remove the old home button. It may be lightly adhered.
  11. Install New Home Button: Position the new iFixit home button into place. Ensure it sits correctly and the flex cable aligns.
  12. Connect New Home Button Cable: Carefully connect the new home button flex cable.
  13. Rimontare: Follow the disassembly steps in reverse order. Reconnect display cables, then the battery. Reattach the display assembly to the iPhone body and secure the pentalobe screws.
  14. Funzionalità di prova: Power on the iPhone and test the home button functionality (single press, double press). Remember, Touch ID will not work.

5. Operating the Replacement Home Button

Once installed, the iFixit replacement home button operates identically to the original in terms of physical presses and gestures, with the exception of Touch ID.

  • Stampa singola: Returns to the Home screen from any application.
  • Doppia pressione: Activates the App Switcher, allowing you to view e passare da un'applicazione aperta all'altra.
  • Tripla pressione: Activates Accessibility Shortcuts (if configured in Settings > Accessibility > Accessibility Shortcut).
  • Premere e tenere premuto: Activates Siri (if enabled).

Important Note: Touch ID functionality will be permanently lost with the installation of any non-original home button. This is a security feature implemented by Apple.

6. Manutenzione

The iFixit home button replacement part requires minimal maintenance once installed. However, following these general guidelines can help ensure its longevity:

  • Mantenere pulito: Regularly wipe the home button and surrounding area with a soft, dry, lint-free cloth to prevent dust and debris buildup.
  • Evitare i liquidi: Do not expose the home button or your device to liquids, as this can cause damage to internal components.
  • Uso delicato: Avoid excessive force when pressing the home button.

7. Risoluzione Dei Problemi

If you encounter issues after installing the replacement home button, consider the following troubleshooting steps:

ProblemaPossibile causaSoluzione
Home button does not click or respond.
  • Flex cable not properly connected.
  • Home button misaligned.
  • Damaged flex cable during installation.
  • Re-open device and ensure home button flex cable is securely seated.
  • Verify home button alignment within the display assembly.
  • Inspect flex cable for tears or damage. If damaged, replacement may be necessary.
Home button feels loose or wobbly.
  • Home button bracket not securely fastened.
  • Home button not seated correctly.
  • Ensure all screws for the home button bracket are tightened.
  • Re-seat the home button into its recess on the display assembly.
Touch ID is not working.
  • Questo è un comportamento previsto.
  • The replacement home button does not restore Touch ID functionality due to Apple's security protocols.

8. Specifiche

Nome della parteHome Button Replacement
MarcaiFixit
CompatibilitàiPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone SE 2020
ColoreNero
FunzionalitàRestores home button click and navigation. Does NOT restore Touch ID.
Peso dell'articolo0.16 once
ASINB086V6XCS7
Paese di origineCina
Data prima disponibilità17 luglio 2020

9. Garanzia e supporto

iFixit stands behind its products. For specific warranty information and support, please refer to the official iFixit websito.

iFixit offers a "Backed for Life" warranty on their tools and parts. This means if a tool breaks or a part is defective, they will replace it for as long as you own it.

Hands holding an iFixit screwdriver with a 'Quality Parts and Tools - Backed for Life' badge overlay

Figura 9.1: iFixit's "Backed for Life" commitment, emphasizing quality and long-term support.

For further assistance, visit the iFixit support page or community forums:

Documenti correlati - iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

Preview Guida alla sostituzione della scheda logica dell'iPhone 6
Una guida dettagliata per sostituire la scheda logica di un Apple iPhone 6, con i dettagli degli strumenti, dei componenti e delle procedure necessari per lo smontaggio e il rimontaggio.
Preview Guida alla riparazione NAND dell'iPhone X: correzione della modalità di ripristino e sblocco dei dati
Una guida dettagliata di iFixit e REWA su come sbloccare i dati NAND e riparare un iPhone X bloccato in modalità di ripristino sostituendo il chip di archiviazione NAND. Include istruzioni dettagliate, suggerimenti per la risoluzione dei problemi e gli strumenti necessari.
Preview Come ripristinare True Tone su iPhone XS dopo la sostituzione dello schermo
Una guida completa di iFixit che descrive nel dettaglio il processo di ripristino della funzionalità del display True Tone su un iPhone XS dopo la sostituzione dello schermo, utilizzando un programmatore per trasferire i dati necessari.
Preview Guida alla sostituzione della scheda SIM dell'iPhone 7
Una guida passo passo di iFixit per sostituire o rimuovere la scheda SIM da un Apple iPhone 7, inclusi gli strumenti e i componenti necessari.
Preview Guida alla sostituzione della batteria dei tasti funzione del MacBook Pro 13" di fine 2016
Una guida passo passo per sostituire la batteria di un MacBook Pro da 13 pollici con tasti funzione, prodotto a fine 2016. Questa guida illustra come disattivare l'avvio automatico, rimuovere il case inferiore, scollegare la batteria e sostituirla con istruzioni dettagliate e precauzioni di sicurezza.
Preview Guida alla sostituzione della cover posteriore del Huawei P9 - iFixit
Istruzioni passo passo di iFixit per sostituire la cover posteriore di uno smartphone Huawei P9. Scopri come eseguire la riparazione in modo sicuro ed efficace.