Manuale utente del sensore di livello VERIGAP AMETEK 705-0001-001 404-1000

Introduzione

This manual provides essential information for the installation, operation, and maintenance of the AMETEK 705-0001-001 404-1000 VERIGAP Level Sensor. This industrial-grade sensor is designed for precise liquid level measurement in various applications, offering robust performance and reliability. Please read this manual thoroughly before attempting any installation or operation.

Figura 1: Principale view of the AMETEK VERIGAP Level Sensor, showing its blue housing and metallic probe.

Informazioni sulla sicurezza

ATTENZIONE: la mancata osservanza di queste istruzioni di sicurezza potrebbe causare gravi lesioni o danni alla proprietà.

HAZARD WITH COVER REMOVED: Always turn off power before removing the cover of the sensor enclosure. This device is designed for explosionproof installations.
For explosionproof installations, ensure conduit seals are located within 2 inches (50 mm) of the enclosure.
This enclosure is FM approved as Explosionproof Class I Div. 1 Groups A, B, C, D; Dust Ignitionproof Class II, Div. 1 Groups E, F, G, Class III Div. 1.
The sensor operates on 120/240V AC 20VA, or 13-30V DC, 1 Watt. T4. Ensure power supply matches these specifications.
Installation must be performed according to drawing 420-0004-024-CD.
The enclosure type is 4X, indicating protection against environmental elements.

Close-up of AMETEK VERIGAP label with safety warnings

Figura 2: primo piano view of the AMETEK VERIGAP label, detailing explosion-proof ratings and safety warnings regarding cover removal and conduit sealing.

Close-up of AMETEK model and electrical specifications label

Figura 3: dettagliata view of the product label, showing Model 404-1000 Series, Level Control and 705 Series Sensor, along with electrical specifications (120/240V AC, 13-30V DC) and enclosure type 4X.

Configurazione e installazione

Proper installation is critical for the accurate and safe operation of the VERIGAP Level Sensor. Refer to the specific installation drawing 420-0004-024-CD for detailed instructions relevant to your application.

Montaggio

The sensor should be mounted securely in the desired location, ensuring the probe is correctly positioned for level detection. Consider the process conditions such as pressure and temperature when selecting the mounting point.

Collegamenti elettrici

Connect the power supply to the "POWER IN" port as indicated on the sensor housing. Ensure the power source is within the specified voltage range (120/240V AC or 13-30V DC). All wiring should comply with local electrical codes and the explosion-proof requirements outlined in the safety section.

Lato view of AMETEK VERIGAP Level Sensor showing 'POWER IN' port

Figura 4: lato view of the sensor, highlighting the "POWER IN" port for electrical connections.

Operazione

The AMETEK VERIGAP Level Sensor is designed for continuous and reliable level measurement. Once properly installed and powered, the sensor will begin detecting the liquid level based on its calibration. The output signal will correspond to the measured level, which can then be integrated into your control system.

This sensor is calibrated for 1000 PSI, making it suitable for high-pressure applications. Ensure the process pressure does not exceed the maximum working pressure (MWP) of 6880 kPa or 1000 psi up to 121°C (250°F).

Close-up of sensor probe label showing MWP and serial number

Figure 5: Close-up of the sensor probe's identification label, indicating the Maximum Working Pressure (MWP) of 6880 kPa or 1000 psi up to 121°C or 250°F, and a serial number (e.g., AGQ-002417).

Manutenzione

The VERIGAP Level Sensor is built for durability and requires minimal routine maintenance. However, periodic checks are recommended to ensure optimal performance and longevity.

Pulizia: Periodically inspect the sensor probe for buildup or fouling, which may affect accuracy. Clean the probe gently using appropriate methods for the process media.
Connessioni: Verificare che tutti i collegamenti elettrici siano saldi e privi di corrosione.
Integrità dell'involucro: Inspect the enclosure for any signs of damage or compromise, especially in harsh environments, to maintain its Type 4X rating and explosion-proof integrity.

Risoluzione dei problemi

This section provides general guidance for common issues. For complex problems, contact AMETEK technical support.

Problema	Possibile causa	Soluzione
No output/Incorrect reading	No power, incorrect wiring, sensor fouling, incorrect calibration.	Check power supply and connections. Inspect and clean sensor probe. Verify calibration settings.
Letture intermittenti	Loose connections, electrical interference, process instability.	Secure all wiring. Check for sources of electrical noise. Evaluate process conditions.
Danni fisici al recinto	Impatto, esposizione chimica.	Replace damaged components or the entire unit to maintain safety ratings.

Specifiche

Modello: 705-0001-001 404-1000 VERIGAP Level Sensor
Produttore: AMETEK
Calibrazione: 1000 bar
Voltage (CA): 120 V-CA, 240 V-CA
Voltage(DC): 13-30V DC
Consumo energetico: 1 Watt
Valutazione della temperatura: T4
Pressione massima di esercizio (MWP): 6880 kPa or 1000 psi up to 121°C (250°F)
Tipo di contenitore: 4X
Explosion-Proof Rating: FM Approved, Class I Div. 1 Groups A,B,C,D; Dust Ignitionproof Class II, Div. 1 Groups E,F,G, Class III Div. 1
Dimensioni del prodotto: 18.75 x 8.75 x 8 pollici (47.6 x 22.2 x 20.3 cm)
Peso del prodotto: 7.91 libbre (3.59 kg)
ASIN: B089QVQRM4
Riferimento del numero di serie: 0762038 (dall'etichetta del prodotto)

Garanzia e supporto

For warranty information, technical support, or service inquiries, please contact AMETEK directly. Refer to the official AMETEK websito o nella documentazione di acquisto per i termini di garanzia specifici e i dettagli di contatto.

Puoi trovare maggiori informazioni su www.drexelbrook.com, as indicated on the product label.

	Manuale di programmazione della sorgente di alimentazione CA programmabile serie AMETEK CW-P Manuale di programmazione per la fonte di alimentazione CA programmabile AMETEK serie CW-P, che descrive in dettaglio i comandi SCPI, le operazioni dell'interfaccia e le configurazioni di sistema per i modelli CW 801P, CW 1251P e CW 2501P.
	Manuale utente del software di regolazione AmeTrim per calibratori di temperatura Jofra User manual detailing the installation, connection, and operation of AMETEK's AmeTrim Adjustment Software for Jofra Temperature Calibrators (RTC, PTC, ATC, DTI, ASM-80x series). Covers temperature and input adjustments, factory defaults, and printer setup.
	Simulatori ESD AMETEK: Guida rapida e istruzioni di sicurezza Questo documento fornisce una guida rapida e istruzioni di sicurezza essenziali per i simulatori ESD AMETEK, che coprono i modelli ESD NX30, ESD NX30.1, Dito, NSG 435, NSG 437, NSG 438 e NSG 438A. Descrive dettagliatamente gli aspetti di sicurezza, le procedure operative, le precauzioni di prova, la manutenzione e lo smaltimento.
	Celle GTEM: test di emissioni e immunità in un unico ambiente schermato Una guida completa alle celle GTEM per test di emissioni e immunità, che descrive in dettaglio la loro funzione, il calcolo della potenza in ingresso, la modalità TEM, le impostazioni dei test di immunità, la misurazione delle emissioni, le specifiche del prodotto, le opzioni e i test dei circuiti integrati (IC).
	Manuale operativo della pompa del martinetto idraulico P014 Manuale operativo per la pompa idraulica AMETEK P014, che descrive in dettaglio le sue caratteristiche, le istruzioni di sicurezza, le procedure operative, gli schemi di collegamento, le specifiche e la risoluzione dei problemi.
	AMETEK ESP-VP-10V-1627i Vertical PDU Quick Start Guide Quick start guide for the AMETEK ESP-VP-10V-1627i Vertical PDU, a 1-phase 16A power distribution unit with 24 C13 and 3 C19 outlets, 3m cable, and IEC 60309 plug. Includes safety information and installation details for IT environments.

Ametek 705-0001-001 404-1000