Generac 070185ES Oil Filter Instruction Manual

1. Introduzione

This manual provides essential information regarding the Generac 070185ES oil filter. It is designed to assist users in understanding the product, its compatibility, and proper installation procedures. This genuine Generac part is crucial for maintaining the performance and longevity of your compatible generator.

2. Informazioni sulla sicurezza

Always prioritize safety when performing maintenance on your generator. Failure to follow safety precautions can result in serious injury or damage to equipment.

• Ensure the generator is completely shut down and cooled before attempting any maintenance.
• Scollegare il cavo della candela per evitare avviamenti accidentali.
• Indossare adeguati dispositivi di protezione individuale, tra cui guanti e protezioni per gli occhi.
• Be aware that engine oil can be hot and cause burns.
• Smaltire l'olio e i filtri usati in modo responsabile, nel rispetto delle normative locali.
• Refer to your generator's owner's manual for specific safety guidelines and procedures.

3. Prodotto finitoview e compatibilità

The Generac 070185ES is a genuine OEM oil filter designed for optimal filtration and protection of your generator's engine. It is supplied as a bulk-packed item.

Image: Two Generac 070185ES oil filters, showing the brand and part number.

3.1 Replaces Part Numbers

This filter replaces previous Generac oil filter part numbers: 070185, 070185E, E 070185 °F.

3.2 Compatible Generator Models

The 070185ES oil filter is compatible with a wide range of Generac generators, including:

• All 8, 10, 12, 13, 14, 15, 16, 17, 18, & 20kW Generac, Guardian, Centurion, Bryant, Watchdog, Dayton, Siemens & Carrier Air-Cooled Standby Units manufactured from 2008 onwards.
• Portable generator models 10kW and up to 17.5kW, including: 5501, 5502, 5503, 5504, 5505, 5506, 5518, 5520, 5522, 5523, 5524, 5525, 5348, 5395, 4389, 4673, 4758, 5280, 5240, 5247, 5241, 5242, 5248, 5281, 4456, 4390, 4675, 4666, 5011, 4670, 4759, 4451, 4583, 4987, 4582, 4986, 5209, 4916, 5820, 5821, 5838, 5870, 5871, 5872, 5873, 5874, 5875, 5882, 5883, 5884, 5885, 5886, 5887.

Always consult your specific generator's owner's manual to confirm the correct part number for your model.

4. Installazione (configurazione)

The following are general steps for replacing an oil filter. Always refer to your generator's owner's manual for detailed, model-specific instructions and torque specifications.

1. Preparare il generatore: Ensure the generator is turned off, cooled down, and the spark plug wire is disconnected. Place a drain pan beneath the oil drain plug.
2. Svuotare l'olio vecchio: Remove the oil drain plug and allow all old engine oil to drain completely into the pan.
3. Rimuovi il vecchio filtro: Position the drain pan under the oil filter. Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some oil to spill from the filter.
4. Prepara nuovo filtro: Apply a thin film of new engine oil to the rubber gasket of the new Generac 070185ES oil filter. This ensures a proper seal.


Immagine: In basso view of the oil filter, highlighting the gasket and threaded connection.

5. Installa nuovo filtro: Thread the new oil filter onto the engine by hand. Once the gasket makes contact with the engine, tighten it an additional 1/2 to 3/4 turn, or as specified in your generator's manual. Non stringere eccessivamente.
6. Rabbocco dell'olio motore: Replace the oil drain plug and tighten it to the manufacturer's specifications. Refill the engine with the recommended type and amount of new engine oil, as specified in your generator's manual.
7. Controllare eventuali perdite: Reconnect the spark plug wire. Start the generator and let it run for a few minutes. Shut it off and check for any oil leaks around the filter and drain plug. Check the oil level and add more if necessary.
8. Smaltimento dei rifiuti: Properly dispose of the old oil filter and used engine oil at an authorized recycling center.

5. Function and Best Practices

The Generac 070185ES oil filter plays a critical role in your generator's engine health by removing contaminants from the engine oil. A clean oil filter ensures that the engine receives clean oil, which is essential for reducing wear on internal components and maintaining optimal performance.

• Sostituzione regolare: Adhere strictly to the oil and filter change intervals recommended in your generator's owner's manual. This is typically based on operating hours or time elapsed.
• Utilizzare parti originali: Always use genuine Generac replacement parts, such as the 070185ES oil filter, to ensure compatibility, performance, and to maintain any applicable warranties.
• Proper Oil: Use the type and viscosity of engine oil recommended by Generac for your specific generator model.

6. Manutenzione

The primary maintenance task related to the oil filter is its timely replacement. Regular oil and filter changes are the most important maintenance procedures for extending the life of your generator's engine.

• Scheduled Intervals: Consult your generator's owner's manual for the recommended oil and filter change schedule. This schedule is typically provided in terms of operating hours (e.g., every 100 hours) or calendar time (e.g., annually), whichever comes first.
• Ispezione: During oil changes, visually inspect the area around the oil filter for any signs of leaks or damage.

7. Risoluzione Dei Problemi

If you encounter issues related to the oil filter, consider the following:

• Oil Leaks After Replacement:
  • Ensure the old gasket was completely removed from the engine block.
  • Verify the new filter's gasket was lightly oiled before installation.
  • Check that the filter is tightened correctly (hand-tight plus 1/2 to 3/4 turn, or as per manual). Do not overtighten.
  • Inspect the filter for any visible damage or defects.
• Vestibilità errata: Double-check that you have the correct Generac 070185ES filter for your specific generator model. Refer to the compatibility list in Section 3.2 and your generator's manual.
• Problemi di prestazioni del motore: While an oil filter is critical, engine performance issues are rarely solely due to a new, properly installed filter. If issues persist after an oil and filter change, consult your generator's owner's manual for further troubleshooting or contact a qualified service technician.

8. Specifiche

Key specifications for the Generac 070185ES oil filter:

Immagine: Lato view of the Generac 070185ES oil filter.

9. Informazioni sulla garanzia

For warranty information regarding the Generac 070185ES oil filter, please refer to the official Generac warranty policy provided with your generator or available on the Generac website. As a genuine replacement part, its warranty coverage is typically tied to the generator's overall warranty or a specific parts warranty.

10. Assistenza clienti

If you have questions about the Generac 070185ES oil filter, its installation, or compatibility, please contact Generac customer support directly. You can find their contact information on the official Generac website or in your generator's owner's manual.