Intex 58414EP

Intex Pineapple Baby Pool Instruction Manual

Modello: 58414EP

1. Prodotto finitoview

The Intex Pineapple Baby Pool is designed for young children aged 1 to 3 years. It features a built-in sunshade for partial protection from sunlight and a soft inflatable floor for comfort. The pool has an approximate water capacity of 12 gallons (45 liters) with a 5-inch wall height. Inflated dimensions are approximately 40 inches (102 cm) long by 37 inches (94 cm) wide.

Intex Pineapple Baby Pool with dimensions and features

Immagine 1: Passoview of the Intex Pineapple Baby Pool, highlighting its soft inflatable floor and recommended age range of 1-3 years. Approximate inflated size is 39in x 37in (99cm x 94cm).

2. Informazioni sulla sicurezza

WARNING: ADULT SUPERVISION REQUIRED AT ALL TIMES.

This is not a life-saving device. Children can drown in very small amounts of water. Empty the pool when not in use. Do not install the paddling pool over concrete, asphalt, or any other hard surface. Keep children within arm's reach. See product for additional warnings and safety labels.

3. Istruzioni per l'installazione

  1. Scegli una posizione: Select a level, soft surface (such as grass) for setting up the pool. Ensure there are no sharp objects or debris that could puncture the pool. Avoid concrete, asphalt, or other hard surfaces.
  2. Apri la piscina: Estrarre con cautela la piscina dall'imballaggio e dispiegarla completamente sulla superficie scelta.
  3. Gonfiare la piscina: The pool has multiple air chambers. Locate the inflation valves for the main ring, the soft inflatable floor, and the built-in sunshade. Use an air pump (not included) to inflate each chamber until it is firm to the touch but not over-inflated. Ensure all valves are securely closed after inflation.
  4. Riempire con acqua: Once fully inflated, fill the pool with water to the recommended level, which is approximately 5 inches (13 cm) of wall height, or 12 gallons (45 liters). Do not overfill.

Video 1: Demonstration of the Intex Pineapple Baby Pool, showing its inflatable bottom and separate inflation points for the main ring and sunshade. This video provides a visual guide to the setup process.

Intex Pineapple Baby Pool with child and features

Image 2: The Intex Pineapple Baby Pool in use, illustrating the built-in sunshade for partial protection and the soft inflatable floor. It also mentions the approximate water capacity of 12 gallons (45L) and the importance of setting up on level ground.

4. Istruzioni per l'uso

Once the pool is set up and filled, children can enjoy splashing and playing. The built-in sunshade offers partial protection from direct sunlight. Always ensure an adult is actively supervising children in and around the pool.

Video 2: A demonstration of the Intex Pineapple Baby Pool, highlighting its bright colors, shallow depth suitable for babies to sit and splash, and the protective sunshade feature.

5. Manutenzione

  • Pulizia: Regularly clean the pool with mild soap and water. Rinse thoroughly. Do not use abrasive cleaners or brushes.
  • Drenante: To drain the pool, open the drain valve (if present) or carefully tip the pool to empty the water.
  • Essiccazione: Ensure the pool is completely dry before deflating and storing to prevent mold and mildew.
  • Magazzinaggio: Deflate all air chambers, fold the pool neatly, and store it in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from sharp objects.

6. Risoluzione Dei Problemi

  • Deflazione lenta: If the pool slowly deflates, check all inflation valves to ensure they are securely closed. Inspect the pool surface for small punctures. A repair patch is typically included with the product for minor repairs.
  • Uneven Inflation: Ensure all air chambers are inflated evenly. If one section appears softer, add more air to that specific chamber.
  • Perdita d'acqua: Check for visible tears or holes. Use the provided repair patch according to its instructions to seal any leaks.

7. Specifiche

CaratteristicaDettaglio
MarcaIntex
Numero di modello58414EP
Dimensioni del prodotto (gonfiato)40"L x 37"W x 5"H (102 cm x 94 cm x 13 cm)
MaterialePlastica
Capacità12 Gallons (45 Liters) at 5in wall height
Fascia d'età (consigliata)12 mesi - 3 anni
Caratteristica specialeInflatable, Built-in Sunshade, Soft Inflatable Floor
Peso dell'articolo3.5 libbre (1.59 chilogrammi)
Componenti inclusiPool, Repair Patch

8. Garanzia e supporto

For warranty information or product support, please refer to the documentation included with your purchase or contact Intex customer service directly. Specific warranty details are not provided in this manual.

Documenti correlati - 58414EP

Preview Manuale d'uso della piscina Intex Frame Family - Modelli 260x160x65cm e altri
Manuale utente completo per i modelli Intex Frame Pool Set Family, comprese istruzioni di installazione, linee guida per la manutenzione, suggerimenti per la risoluzione dei problemi e informazioni sulla garanzia per un utilizzo sicuro e piacevole della piscina.
Preview Manuale d'uso della piscina INTEX Easy Set: guida all'installazione, alla sicurezza e alla manutenzione
Manuale completo per le piscine INTEX Easy Set (modelli da 18 a 6 metri). Include norme di sicurezza essenziali, istruzioni di installazione, suggerimenti per la manutenzione, risoluzione dei problemi e informazioni sulla garanzia per un utilizzo sicuro e piacevole della piscina.
Preview Manuale d'uso e guida all'installazione del pulitore automatico per piscine Intex
Manuale d'uso completo per il pulitore automatico per piscine Intex. Include istruzioni di installazione, riferimenti ai componenti, guide alla pulizia, suggerimenti per la risoluzione dei problemi e informazioni di sicurezza per la manutenzione del pulitore per piscine.
Preview Piscina ovale Intex Prism Frame 503x274x122 cm - Modello 55213 | Informazioni sul prodotto e sicurezza
Scopri i dettagli essenziali del prodotto e le avvertenze di sicurezza per la piscina ovale Intex Prism Frame (modello 55213). Include dimensioni, capacità, accessori inclusi, contatti del produttore e importanti linee guida per l'uso.
Preview Manuale d'uso del riscaldatore elettrico per piscina Intex HT30221-2
Questo manuale utente fornisce le norme di sicurezza essenziali, le istruzioni di installazione, le procedure operative, la guida alla risoluzione dei problemi e le informazioni sulla garanzia per il riscaldatore elettrico per piscina Intex HT30221-2. Scopri come installare, utilizzare e manutenere in sicurezza il tuo riscaldatore per piscina per prestazioni ottimali.
Preview Manuale d'uso INTEX: Pompa elettrica Fast-Fill™ integrata modello AP619A
Manuale d'uso completo per la pompa elettrica INTEX Fast-Fill™ integrata modello AP619A, contenente istruzioni di sicurezza essenziali, procedure operative per il gonfiaggio e lo sgonfiaggio, note importanti sulla cura del materasso ad aria e linee guida per la conservazione. Scopri come utilizzare e manutenere correttamente la pompa per materasso ad aria INTEX.