Introduzione
This manual provides detailed instructions for the assembly, operation, and maintenance of your ATUMTEK ATMS050 Universal TV Stand. Please read this manual thoroughly before installation to ensure correct setup and safe use of the product. This stand is designed to securely hold LCD and LED televisions ranging from 37 to 65 inches, with a maximum weight capacity of 40 kg (88 lbs).
Image: The ATUMTEK ATMS050 Universal TV Stand, showcasing its sleek design and sturdy construction.
Informazioni sulla sicurezza
- Limite di peso: Do not exceed the maximum weight capacity of 40 kg (88 lbs). Overloading can result in serious injury or product damage.
- Dimensioni TV: This stand is suitable for televisions between 37 and 65 inches. Ensure your TV falls within this range.
- Compatibilità VESA: Verifica che lo schema di montaggio VESA del tuo televisore sia compatibile con il supporto (da 200x100 mm a 600x400 mm).
- Superficie stabile: Posizionare sempre il supporto TV su una superficie piana, stabile e orizzontale per evitare che si ribalti.
- Bambini e animali domestici: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand or TV.
- Installazione corretta: Follow all assembly instructions carefully. If you are unsure about any step, seek professional assistance.
- Controlli regolari: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano sempre ben serrati e sicuri.
Contenuto della confezione
Before beginning assembly, please verify that all parts listed below are present and undamaged. All small parts are individually bagged and numbered for easy identification.
- A. Colonna di supporto principale
- B. Base in vetro temperato
- C. TV Mounting Brackets (2 pcs)
- D. Piastra VESA
- E. Base Support Plate
- F. Anti-Slip Feet (4 pcs)
- G. Clip di gestione dei cavi
- H. Kit hardware (varie viti, rondelle, distanziali per il montaggio della TV e il montaggio del supporto)
- I. Assembly Tools (Hex Key, Wrench)
Immagine: dettagliata view of the stand's components, including the main column, base, and mounting brackets, along with features like cable management, non-slip feet, and safety lock mechanism.
Istruzioni di montaggio
Assembly typically takes about 15 minutes. Two necessary tools are provided in the package. Follow these steps carefully:
- Attach Anti-Slip Feet to Base: Carefully place the tempered glass base (B) on a soft, clean surface. Attach the four anti-slip feet (F) to the designated spots on the underside of the glass base.
- Assemble Base Support Plate: Secure the base support plate (E) to the tempered glass base (B) using the provided screws and the hex key. Ensure it is centered and tightened securely.
- Attach Main Support Column: Connect the main support column (A) to the base support plate (E) using the appropriate screws. Ensure the column is upright and firmly attached.
- Install VESA Plate: Attach the VESA plate (D) to the top of the main support column (A) using the provided screws.
- Attach TV Mounting Brackets to TV: Identify the correct screws, washers, and spacers from the hardware kit (H) that fit your television's VESA mounting holes. Attach the two TV mounting brackets (C) to the back of your television. Ensure the brackets are level and securely fastened.
- Montare la TV sul supporto: Carefully lift your television and hook the TV mounting brackets (C) onto the VESA plate (D) on the stand. Ensure the TV is properly seated and engaged with the safety lock mechanism.
- TV sicura: Use the safety screws or clips to secure the TV mounting brackets to the VESA plate, preventing accidental dislodgement.
- Gestione dei cavi: Route your TV cables through the hollow central column and secure them with the cable management clips (G) for a tidy appearance.
Image: Diagram illustrating VESA mounting patterns (200x100mm to 600x400mm) and overall dimensions of the stand, confirming compatibility for 37-65 inch TVs up to 40kg.
Istruzioni per l'uso
Regolazione dell'altezza
The ATUMTEK ATMS050 TV stand offers multiple height adjustment levels to optimize your viewing experience. The TV mounting brackets can be positioned at 3 different height levels on the main support column. To adjust the height:
- Carefully remove the TV from the VESA plate.
- Adjust the position of the TV mounting brackets (C) on the VESA plate (D) to your desired height level.
- Re-mount the TV onto the stand, ensuring it is securely hooked and the safety lock is engaged.
Funzione girevole
The stand features a swivel mechanism allowing you to adjust the viewing angle. You can pivot your television up to 30 degrees to the left or right.
- Afferrare delicatamente i lati del televisore.
- Carefully rotate the TV to the desired left or right angle. The stand's pivot mechanism is designed for smooth movement.
Image: Illustration demonstrating the 30-degree swivel capability and the three available height adjustment levels for the TV mounting brackets.
Manutenzione
- Pulizia: Utilizzare un panno morbido e asciutto per pulire il supporto. Per i segni ostinati, un panno leggermenteamp È possibile utilizzare un panno imbevuto di sapone neutro, quindi asciugare accuratamente. Evitare detergenti abrasivi o solventi.
- Ispezioni: Periodically inspect all connections and screws to ensure they remain tight. Re-tighten if necessary.
- Cura del vetro: La base in vetro temperato è resistente, ma evita di far cadere oggetti pesanti su di essa o di sottoporla a urti violenti.
Risoluzione dei problemi
- Issue: TV is not stable or wobbles.
- Soluzione:
- Assicurarsi che tutte le viti di montaggio siano ben serrate.
- Verify the stand is placed on a flat, level, and stable surface.
- Check that the TV's weight and size are within the specified limits (max 40kg, 37-65 inches).
- Confirm the anti-slip feet are properly attached to the base.
- Issue: TV does not fit the mounting brackets.
- Soluzione:
- Check your TV's VESA mounting pattern. It must be between 200x100mm and 600x400mm.
- Ensure you are using the correct screws, washers, and spacers from the hardware kit for your specific TV model.
- Issue: Cables are messy.
- Soluzione:
- Utilize the integrated cable management system by routing cables through the hollow central column and securing them with the provided clips.
Specifiche
| Marca | Atumtek |
| Numero di modello | ATMS050 |
| Dimensioni TV compatibili | 37 - 65 pollici |
| Capacità di carico massima | 40 kg (88 libbre) |
| Compatibilità VESA | da 200x100mm a 600x400mm |
| Materiale | Acciaio SPCC, vetro temperato |
| Tipo di movimento | Swivel (up to 30 degrees left/right) |
| Regolazione dell'altezza | 3 livelli |
| Dimensioni di base | 42 cm x 28 cm (16.5 x 11 pollici) |
Garanzia e supporto
ATUMTEK provides a Garanzia di 3 anni senza pensieri against manufacturer defects for this product. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or any questions regarding your ATUMTEK ATMS050 Universal TV Stand, please contact ATUMTEK customer service. Refer to the product packaging or the official ATUMTEK websito per le informazioni di contatto più aggiornate.
Conservare la prova d'acquisto per l'assistenza in garanzia.
