Manuale d'uso del supporto TV girevole universale BONTEC

1. Introduzione

Thank you for choosing the BONTEC Universal Swivel TV Stand. This stand is designed to provide a stable and versatile mounting solution for your television, offering height adjustment and swivel capabilities for optimal viewing. Please read this manual carefully before assembly and use to ensure safe and correct operation.

This TV stand is compatible with most 17-43 inch flat and curved LCD/LED/OLED/Plasma/Curved TVs/display screens with VESA patterns 75x75mm, 100x100mm, 200x100mm, and 200x200mm. It supports TVs up to 45kg (99 lbs).

Image 1.1: The BONTEC Universal Swivel TV Stand, showing the main components including the base, pillar, mounting plate, and two cable ties.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Do not exceed the weight capacity of 45kg (99 lbs). Serious injury or property damage may occur.

• Ensure all components are securely fastened before placing the TV on the stand.
• Do not attempt to move the stand with the TV mounted without proper assistance.
• Tenere bambini e animali domestici lontani dal supporto durante il montaggio e il funzionamento.
• Verify your TV's VESA pattern and weight are within the specified limits before purchase and assembly.
• Ensure the cable outlet on your TV will not be covered by the TV stand's mounting plate.

Image 2.1: Important note to ensure the TV's cable outlet is not obstructed by the stand's mounting bracket.

3. Contenuto della confezione

Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti e integri. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.

• Base in vetro temperato
• Steel Pillar
• TV Mounting Bracket (VESA Plate)
• Base Screws and Washers
• TV Mounting Screws (M4*12mm, M6*15mm, M8*20mm)
• Washers (D5, D8) and Spacers (D8*5mm) for TV mounting
• Anti-slip Rubber Feet (4 pcs)
• Fascette fermacavi (2 pezzi)
• Kit hardware di montaggio
• Manuale di istruzioni

Image 3.1: Included TV mounting hardware, showing different sizes of screws (M4, M6, M8), washers, and spacers.

4. Istruzioni di montaggio

Follow these steps carefully to assemble your BONTEC Universal Swivel TV Stand. A Phillips head screwdriver is required (not included).

1. Fase 1: assemblare la base e il pilastro
   Attach the steel pillar to the tempered glass base using the provided screws and washers. Ensure the pillar is firmly secured to the base. Apply the four anti-slip rubber feet to the bottom of the glass base.
   

   Image 4.1: Illustration of assembling the mounting plate, steel pillar, and tempered glass base.
2. Passaggio 2: collegare la staffa di montaggio alla TV
   Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes. Mount the TV mounting bracket (VESA plate) onto the back of your TV. Ensure the screws are tightened securely. Double-check that the cable outlet on your TV is not covered by the bracket.
   

   Image 4.2: Detail of the TV mounting bracket with VESA holes.

3. Step 3: Hang TV onto Stand
   Carefully lift your TV (it is recommended to have two people for larger TVs) and hook the mounted TV bracket onto the steel pillar of the stand. Ensure it is properly seated.
4. Step 4: Secure TV to Stand
   Once the TV is hooked onto the pillar, tighten the safety screws located on the bottom of the TV mounting bracket to secure the TV to the stand. This prevents accidental dislodgement.
5. Fase 5: Gestione dei cavi
   Use the two included cable ties to organize and secure any loose cables along the back of the stand's pillar for a neat and clean appearance.
   

   Image 4.3: Features including cable ties for organization and anti-slip rubber feet on the base.

5. Istruzioni per l'uso

5.1 Regolazione dell'altezza

The BONTEC TV stand offers three levels of height adjustment. To change the height, you will need to unmount the TV from the pillar, adjust the mounting position on the pillar, and then re-mount the TV. Each adjustment level changes the height by approximately 5cm.

Image 5.1: Visual representation of the three available height settings for the TV stand (255mm, 305mm, 355mm from base to center of VESA).

5.2 Funzione girevole

The TV stand allows for a swivel of +/- 50 degrees, providing flexible viewing angles. Gently rotate the TV to the desired position. The maximum swivel angle may vary depending on the size of your television.

Image 5.2: Illustration of the TV stand's +/- 50 degree swivel capability for optimal viewing.

6. Manutenzione

• Pulizia: Use a soft, dry cloth to clean the stand. For stubborn marks on the glass base, a mild glass cleaner can be used. Avoid abrasive cleaners or solvents.
• Ispezione: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati e sicuri. Serrare nuovamente se necessario.
• Prevenzione della ruggine: All assembly parts are designed to be rustproof. However, avoid prolonged exposure to moisture to maintain the stand's integrity.

Immagine 6.1: Passoview of the stand's safety and durability features, including the double-security structure and tempered glass base.

7. Risoluzione Dei Problemi

• La TV non si adatta al supporto:
  • Verify your TV size is between 17 and 43 inches.
  • Check your TV's VESA pattern. It must be 75x75mm, 100x100mm, 200x100mm, or 200x200mm.
  • Ensure your TV's weight does not exceed 45kg (99 lbs).
  • If your TV screen is less than 225mm x 225mm, the TV mounting arms may protrude from behind the TV.
  • For TVs with VESA size of 200x200mm, the distance from the lowest mounting hole of your TV to the bottom edge must be less than 250mm to avoid interference with the stand.
  

  Image 7.1: Important considerations for TV compatibility, including VESA pattern and potential cable outlet obstruction.

• Il supporto sembra instabile:
  • Ensure all screws are tightened securely, especially those connecting the pillar to the base and the bracket to the TV.
  • Verify the TV's weight is within the specified limit.
  • Assicurarsi che il supporto sia posizionato su una superficie piana e stabile.
• I cavi sono disordinati:
  • Utilize the included cable ties to bundle and route cables neatly along the back of the stand's pillar.

8. Specifiche

Image 8.1: Detailed product dimensions and compatibility information, including VESA patterns and weight capacity.

9. Garanzia e supporto

Specific warranty details are not provided within this manual. Please refer to the manufacturer's official website or your purchase documentation for warranty information and terms.

For technical support, missing parts, or any inquiries regarding your BONTEC Universal Swivel TV Stand, please contact BONTEC customer service through their official channels or the retailer from whom you purchased the product.

You can visit the BONTEC store on Amazon for more information: Negozio BONTEC