diymore 0.28" Volt Amp Manuale utente del misuratore

Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of the diymore 0.28" Volt Amp Meter. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The diymore Volt Amp Meter is a compact digital display unit designed for measuring DC voltage and current. It features a dual LED display, showing both voltage and current simultaneously. It is suitable for various applications, including automotive battery monitoring and general electrical measurements.

Five diymore 0.28 inch Volt Amp Meters packaged together — This image shows a pack of five diymore 0.28" Volt Amp Meters. Each meter features a compact black casing with a dual LED display, showing blue for voltage and green for current. Wires for connection are visible, indicating their readiness for integration into various electrical systems.

Caratteristiche del prodotto

Doppio display: Simultaneous display of voltage and current on a 0.28" digital tube.
Ampia gamma di misurazioni: Misura il volume DCtage from 0-100V and DC current from 0-10A.
Alta precisione: 1% (± 1 digit) measurement accuracy.
Design compatto: Small dimensions (48mm x 29mm x 26mm) for easy integration.
Shunt incorporato: For current measurements up to 10A, no external shunt is required.

Precauzioni di sicurezza

Voltage Limite: Do not exceed 30V DC for the meter's working voltage. Exceeding this limit will damage the device.
Limite corrente: The meter is designed for currents up to 10A. Ensure the circuit current does not exceed this value.
Polarità: Always observe correct polarity when connecting the meter to a circuit. Incorrect connections can cause damage.
Installazione professionale: If you are unsure about wiring, consult a qualified electrician or technician.
Ambiente operativo: Use the meter within the specified operating temperature range (-10℃ to +65℃).

Configurazione e installazione

The diymore Volt Amp Meter requires a DC power source for its operation and separate connections for voltage e misurazione della corrente.

Schema elettrico

Wiring diagram for diymore Volt Amp metro — This image displays the wiring diagram for the diymore Volt Amp Meter. It shows three sets of wires:
**Thin Black and Red Wires:** These are for the meter's power supply (DC 4.5-30V). The red wire connects to the positive (+) terminal, and the black wire connects to the negative (-) terminal of the power source.
**Thin Black and Yellow Wires:** These are for voltage measurement (DC 0-100V). The yellow wire connects to the positive (+) point of the circuit being measured, and the black wire connects to the negative (-) point.
**Thick Red and Black Wires:** These are for current measurement (DC 0-10A). The thick red wire connects in series with the positive (+) side of the load, and the thick black wire connects to the negative (-) side of the load, completing the circuit through the meter.
un example circuit is shown with a light bulb as the load, illustrating how the meter is integrated to measure both the voltage across the load and the current flowing through it.

Fasi di connessione

Collegamento dell'alimentazione: Connect the thin red wire to the positive (+) terminal of a DC 4.5-30V power supply and the thin black wire to the negative (-) terminal. This powers the meter itself.
Voltage Measurement Connection: Connect the thin yellow wire to the positive (+) point of the circuit or device whose voltage you wish to measure. Connect the thin black wire (common ground) to the negative (-) point of the same circuit.
Current Measurement Connection: The thick red and black wires are for current measurement. These must be connected in series with the load.
- Disconnect the positive (+) supply line to your load.
- Connect the thick red wire from the meter to the positive (+) supply.
- Connect the thick black wire from the meter to the positive (+) terminal of your load.
- Ensure the load's negative (-) terminal is connected to the negative (-) supply.
Note: For current measurements up to 10A, the meter has a built-in shunt. Do not add an external shunt.

Installazione fisica

The meter is designed for panel mounting. Ensure the cutout dimensions are appropriate for the meter's size (48mm x 29mm x 26mm). Secure the meter in place using the integrated clips or a suitable mounting bracket.

Disassembled diymore Volt Amp Meter showing internal components — This image shows the diymore Volt Amp Meter disassembled, revealing its internal circuit board and components. The front display panel is separated from the main body, which houses the PCB with various electronic components and the connection terminals. This view illustrates the compact internal design and the integrated nature of the meter's electronics.

Istruzioni per l'uso

Once properly wired and powered, the diymore Volt Amp Meter will automatically display the measured voltage and current on its dual LED screen.

diymore Volt Amp Meter displaying voltage e corrente — This image shows a single diymore Volt Amp Meter with its blue and green LED displays illuminated. The blue display shows a voltage reading (e.g., "22.8 V"), and the green display shows a current reading (e.g., "3.96 A"). The connection wires (red, black, yellow) are visible, extending from the back of the meter. This illustrates the meter in an operational state, showing its primary function of simultaneously displaying voltage e corrente.

The upper (blue) display indicates the voltage in Volt (V).
The lower (green) display indicates the current in Ampere (A).
The display refreshes approximately every 300 milliseconds.

No calibration or adjustment is typically required for standard operation. The meter is designed for direct measurement within its specified ranges.

Manutenzione

The diymore Volt Amp Meter is a low-maintenance device. Follow these guidelines to ensure its longevity:

Pulizia: Utilizzare un panno morbido e asciutto per pulire il display e casing. Non utilizzare detergenti abrasivi o solventi.
Protezione ambientale: Avoid exposing the meter to excessive moisture, dust, or extreme temperatures outside its operating range.
Integrità della connessione: Controllare periodicamente tutti i collegamenti dei cavi per accertarsi che siano saldi e privi di corrosione.
Nessuna parte riparabile dall'utente: The device contains no user-serviceable parts. Do not attempt to open or repair the meter yourself, as this may void the warranty and cause further damage.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
No Display / Meter Off	Nessuna alimentazione al contatore. Alimentazione non corretta voltage (outside 4.5-30V DC). Reversed power supply polarity. Damaged meter.	Check connections of thin red and black wires to power supply. Verificare alimentazione voltage è compreso tra 4.5 e 30 V CC. Ensure red wire is connected to positive, black to negative. If all else fails, the meter may be damaged.
Voltage Reading is Zero or Incorrect	Vol non correttotage measurement wiring. nessun volumetage present in the circuit being measured. Loose connection of thin yellow or black wires.	Verify thin yellow wire is connected to positive, black to negative of the circuit under test. Conferma volumetage is present in the circuit using another voltmeter. Proteggere tutte le connessioni.
Current Reading is Zero or Incorrect	Incorrect current measurement wiring (not in series). No current flowing through the load. Loose connection of thick red or black wires. La corrente di carico supera 10 A.	Ensure thick red and black wires are connected in series with the load. Verify the load is drawing current. Proteggere tutte le connessioni. Confirm load current is within the 0-10A range.

Specifiche

Parametro	Valore
Volume di lavorotage	DC 4.5-30V
Corrente di lavoro	≤20mA
Voltage Campo di misura	DC 0-100V
Campo di misurazione della corrente	CC 0-10 A
Voltage Resolution (V)	0.1V
Current Resolution (A)	0.01A
Misurare la precisione	1% (± 1 cifre)
Frequenza di aggiornamento	About 300mS / times
Dimensioni	Dimensioni: 48 mm x 29 mm x 26 mm
Temperatura di funzionamento	da -10℃ a +65℃

Garanzia e supporto

diymore products are manufactured to high quality standards. For warranty information or technical support, please contact diymore customer service through the platform where you purchased the product or visit the official diymore websito.

Conservare la prova d'acquisto per eventuali richieste di garanzia.

	Diymore 0.28 pollici doppio display voltmetro CC amperometro 100V 10A - Manuale utente Guida concisa al cablaggio e all'utilizzo del voltmetro e amperometro CC Diymore a doppio display da 0.28 pollici, in grado di misurare fino a 100 V e 10 A. Include schemi elettrici per diverse configurazioni di alimentazione. Supporta un ingresso di alimentazione CC da 4 a 30 V e un intervallo di misurazione CC da 0 a 100 V.
	CM430-10A DC100V 10A 直流双显电压电流功率计 - 用户手册与技术规格 CM430-10A是一款DC4-30V供电的直流双显电压电流功率计，支持DC0-100V电压、0-10A电流和0-999W功率测量。本手册提供详细的技术参数、接线指南、界面介绍及菜单设置方法。
	Istruzioni per l'uso per Diymore Adjustable Voltage Regolatore Istruzioni operative dettagliate e impostazioni dei parametri per il Diymore Adjustable Voltage Regolatore DC Buck Boost Converter, coprendo voltage regolazione della corrente, impostazioni di protezione e calibrazione.
	5918 Vol. digitaletage Manuale utente del misuratore Manuale utente per il 5918 Digital Voltage Meter di diymore. Copre i parametri del prodotto, la descrizione, le funzioni chiave e le istruzioni di configurazione dettagliate per vari tipi di batterie (litio ternario, ferro-litio, piombo-acido) e volumi personalizzatitage/impostazioni della retroilluminazione.
	Modulo relè Bluetooth a 4 canali DC 5V/12V diymore - Controllo della casa intelligente Dettagliato sopraview del modulo relè Bluetooth a 4 canali DC 5V/12V di Diymore per la domotica. Dispone di controllo remoto tramite APP mobile, modulo Bluetooth JDY-31 e relè da 10 A.
	Diymore STC-3008 Regolatore di temperatura digitale - Doppio display NTC Specifiche dettagliate e manuale utente per il termostato digitale Diymore STC-3008. Dotato di doppio display, sensori NTC, compatibilità con AC 110 V/230 V e istruzioni per la configurazione, il funzionamento e la sicurezza del riscaldamento/raffreddamento.

diymore 11286400-00a4-4719-befa-ff5839e3bcaf