Manuale utente del supporto da parete per TV BONTEC

Introduzione

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC TV Wall Mount Bracket. Designed for 17-45 inch LED, OLED, LCD Flat Screen TVs up to 66lbs, this low-profile, ultra-slim mount offers a secure and aesthetically pleasing solution for mounting your television. Please read this manual thoroughly before installation to ensure safe and correct usage.

Informazioni sulla sicurezza

• Assicurarsi che la struttura della parete possa sostenere in modo sicuro il peso combinato del supporto e del televisore.
• Do not mount on drywall alone. Always mount into wood studs, concrete, or brick walls.
• Verify your TV's VESA pattern and weight are within the mount's specifications (Max VESA 200x200mm, Max 66lbs).
• Use all provided hardware. If any parts are missing or damaged, contact BONTEC customer support.
• Utilizzare sempre un cerca-travetti per individuare con precisione i montanti in legno.
• During installation, ensure no electrical wires or plumbing are behind the drilling area.
• Two people are recommended for installation to ensure safety and ease of handling.
• After installation, double-check all connections and ensure the TV is securely fastened to the mount.

Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• TV Wall Mount Bracket (Main Frame)
• TV Mounting Brackets (x2)
• Assorted Screws and Washers for TV attachment
• Lag Bolts and Wall Anchors for wall attachment
• Livella a bolla d'aria
• Fascette (x3)
• Manuale di installazione

Image: All components of the BONTEC TV Wall Mount Bracket, including the main frame, TV brackets, and installation hardware.

Specifiche

Image: Diagram illustrating the VESA compatibility (50-200mm) and screen size range (17-45 inches) for the mount.

Configurazione e installazione

Follow these steps carefully to install your BONTEC TV Wall Mount Bracket. It is highly recommended to have two people for this process.

Passaggio 1: collegare le staffe TV alla TV

1. Posizionare con cura il televisore a faccia in giù su una superficie morbida e pulita per evitare graffi.
2. Identifica i fori di montaggio VESA sul retro del televisore.
3. Select the appropriate screws and washers from the provided hardware kit that fit your TV's mounting holes.
4. Attach the two vertical TV mounting brackets to the back of your TV. Ensure the hooks on the brackets are facing inward, towards the center of the TV.
5. Stringere saldamente le viti, ma non eccessivamente.

Image: A television mounted flat against a wall, demonstrating the ultra-slim 1.18-inch profile del monte.

Step 2: Mark and Drill Holes on Wall

1. Determina l'altezza desiderata per il tuo televisore.
2. Place the wall plate against the wall at the desired height and use the included spirit level to ensure it is perfectly horizontal.
3. Mark the drilling points through the holes on the wall plate using a pencil.
4. Per montanti in legno: Use a stud finder to locate the center of the wood studs. Drill pilot holes (recommended size: 7/32" or 5.5mm) at the marked locations.
5. Per muri in cemento/mattoni: Drill pilot holes (recommended size: 3/8" or 10mm) at the marked locations. Insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if needed until flush with the wall surface.

Image: Visual guide demonstrating the applicability of the mount to wood studs, concrete walls, and brick walls. A warning states: "DO NOT MOUNT ON DRYWALL ALONE".

Fase 3: montare la piastra a muro sulla parete

1. Align the wall plate with the drilled holes.
2. Secure the wall plate to the wall using the lag bolts and washers. For concrete/brick walls, ensure the lag bolts go into the previously inserted wall anchors.
3. Tighten all bolts firmly to ensure the wall plate is securely fastened to the wall.

Fase 4: appendere la TV alla piastra a muro

1. Con l'aiuto di qualcuno, sollevare con cautela il televisore utilizzando le staffe in dotazione.
2. Allineare i ganci sulle staffe del televisore con il bordo superiore della piastra a parete.
3. Abbassare delicatamente il televisore, assicurandosi che le staffe si innestino saldamente nella piastra a parete.
4. Once the TV is hanging, locate the safety lock bolts at the bottom of the TV brackets. Tighten these bolts to secure the TV to the wall plate and prevent accidental dislodging.

Image: A visual representation of the easy 15-minute installation process, showing the TV being mounted onto the wall plate.

Immagine: un primo piano view of the safety lock bolts, which secure the TV brackets to the wall plate after the TV is hung.

Videoguida all'installazione

Operating the Mount (Tilt Feature)

The BONTEC TV Wall Mount features a 10-degree forward tilt to optimize your viewing experience and reduce glare.

1. To adjust the tilt, loosen the tilt adjustment bolts on the side of the TV mounting brackets.
2. Carefully tilt the TV to your desired angle (up to 10 degrees forward).
3. Once the desired angle is achieved, tighten the tilt adjustment bolts securely to lock the TV in place.

Image: A diagram illustrating the 10-degree tilt capability of the mount and the space provided for cable management behind the TV.

Image: A family enjoying television, demonstrating how the BONTEC TV wall mount allows for optimal viewing angles in a living room setting.

Manutenzione

To ensure the longevity and safe operation of your BONTEC TV Wall Mount Bracket:

• Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano sempre ben serrati e sicuri.
• Pulire il supporto con un panno morbido e asciutto. Evitare l'uso di detergenti abrasivi o solventi.
• Do not hang anything from the mount other than the specified television.

Risoluzione dei problemi

Garanzia e supporto

For warranty information and customer support, please refer to the product packaging or visit the official BONTEC webluogo. Conserva la ricevuta di acquisto per eventuali richieste di garanzia.

If you encounter any issues not covered in this manual, please contact BONTEC customer service for assistance.