Manuale di istruzioni per l'albero di Natale artificiale preilluminato Topro da 3 piedi

1. Prodotto finitoview

This manual provides detailed instructions for the assembly, operation, and maintenance of your Topro 3ft Pre-Lit Artificial Christmas Tree. This tree features snow-flocked pine branches, 70 UL certified LED lights, 140 branch tips, 7 pine cones, and 10 red berries, designed for indoor and outdoor use.

Caratteristiche principali:

• Natural Lifelike Appeal: Ultra-realistic snow-flocked branches with 140 tips, 10 red berries, and 7 pine cones.
• Luci LED pre-illuminate: Equipped with 70 UL certified LED lights offering 8 distinct lighting modes and an integrated 6-hour On/18-hour Off timer.
• Ideal Sizing: Stands 3ft tall with a 20-inch diameter at the base, suitable for desktop or floor placement.
• Durata nel tempo: Constructed with a burlap-wrapped base for stability and designed for multiple holiday seasons.
• Posizionamento versatile: Suitable for various settings including homes, offices, and commercial spaces.

2. Istruzioni per l'installazione

2.1 Disimballaggio e montaggio iniziale

1. Rimuovere con attenzione tutti i componenti dalla confezione.
2. Place the tree base on a stable, flat surface.
3. Insert the tree into the base, ensuring it is securely seated.

Image 1: The Topro 3ft Pre-Lit Artificial Christmas Tree, fully assembled and ready for shaping.

2.2 Branch Shaping (Fluffing)

For the most lush and full appearance, it is recommended to spend 10-20 minutes shaping the tree branches. Gently spread out each branch tip, working from the bottom of the tree upwards, to fill any gaps and create a natural look.

Image 2: The tree before decoration, illustrating the initial appearance after assembly and shaping.

2.3 Guida all'installazione visiva

The following video demonstrates the unpacking and shaping process for the Christmas tree, providing a visual aid for proper setup.

Video 1: A demonstration of unpacking and shaping the Topro 3ft Pre-Lit Artificial Christmas Tree.

3. Funzionamento delle luci LED

3.1 Installazione della batteria

The LED lights are battery-powered. Locate the battery box, typically attached to the light string. Open the battery compartment, insert the required batteries (not included, refer to packaging for type and quantity), and close the compartment securely.

3.2 Light Modes and Timer Function

The tree features 70 UL certified LED lights with 8 different lighting modes and an integrated timer function.

• Selezione della modalità: Press the button on the battery box to cycle through the 8 available lighting modes:
1. Combinazione
2. In Onda
3. Sequenziale
4. Slo Glo
5. Chasing/Flash
6. Lenta dissolvenza
7. Scintillio/Lampo
8. Continua a leggere
• Funzione timer: The lights include an integrated 6 hours On/18 hours Off timer. Once activated, the lights will remain on for 6 hours, then automatically turn off for 18 hours, and repeat the cycle. To activate or reset the timer, turn the lights on at your desired time.

Immagine 3: Un dettaglio view of the illuminated LED lights and snow-flocked branches.

4. Cura e conservazione

4.1 Pulizia

• To clean the tree, gently dust the branches with a soft, dry cloth.
• Avoid using liquid cleaners or abrasive materials, as these may damage the flocking or electrical components.

4.2 Conservazione

• Before storing, ensure all lights are turned off and batteries are removed from the battery box.
• Gently compress the branches to reduce the tree's volume.
• Conservare l'albero nella confezione originale o in un sacchetto adatto in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.

5. Guida alla risoluzione dei problemi

5.1 Le luci non funzionano

• Controllare le batterie: Ensure fresh batteries are correctly installed in the battery box, observing polarity (+/-).
• Collegamento della scatola della batteria: Verify that the battery box is securely connected to the light string.
• Selezione della modalità: Cycle through the light modes to ensure it's not on an 'off' or 'fade' setting that might appear as off.
• Stato timer: If the timer is active, the lights will turn off for 18 hours. Wait for the next 'on' cycle or reset the timer by turning the lights on at your desired time.
• Fili danneggiati: Inspect the light string for any visible damage or broken wires. If damage is found, discontinue use.

6. Specifiche del prodotto

7. Garanzia e supporto

For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. Contact details for Topro can typically be found on the product's retail page or included documentation.