Infinity Reference-6001A Mono AmpManuale utente lifier

1. Introduzione

The Infinity Reference-6001A is a high-performance 600-watt mono subwoofer amplifier designed to enhance your vehicle's audio system. This amplifier delivers robust bass output with minimal strain on your vehicle's electrical system, thanks to its Class D design. It features versatile input options and precise tuning controls to optimize subwoofer performance.

Figura 1: in alto view of the Infinity Reference-6001A Mono Amplificatore, showcasing its compact design and Infinity logo.

2. Caratteristiche principali

• Design compatto: Presenta un basso profilofile chassis and small footprint for installation in vehicles with limited space.
• Variable Electronic Crossovers and Bass Boost: Allows for precise system tuning and optimized subwoofer performance.
• Ingressi differenziali bilanciati: Engineered to ensure low noise and distortion, even at high output levels, and reduces susceptibility to line-induced engine noise.
• On-board Protection Circuitry: Protegge il amplifier from shorts, high-temperature, overvoltage, e sottovoltage conditions. An LED indicator signals when these conditions occur.
• RBC Wired Remote: Provides convenient volume adjustment for the subwoofer from the driver's seat.
• Ingressi di alto e basso livello: Compatible with both aftermarket and factory car stereo systems.

3. Configurazione e installazione

Un'installazione corretta è fondamentale per prestazioni e sicurezza ottimali. Si raccomanda di affidare l'installazione a un professionista qualificato.

3.1 Montaggio del Amppiù vivace

Select a mounting location that is dry, well-ventilated, and secure. The compact size of the Reference-6001A allows for flexible placement in various vehicles. Ensure adequate airflow around the amplifier per evitare il surriscaldamento.

3.2 Collegamenti di cablaggio

Refer to the diagram below for typical wiring connections. Always disconnect the vehicle's battery before making any power connections.

Figura 2: Posteriore view del amplifier showing power, ground, remote, speaker, and RCA input terminals.

• Potenza (+12V): Connect to the positive terminal of the vehicle's battery using a fuse-protected power cable.
• Terra (GND): Collegare a una superficie metallica pulita e non verniciata del telaio del veicolo.
• Remoto (REM): Collegare all'uscita di accensione remota dell'unità principale.
• Speaker Output (SUB): Connect your subwoofer(s) to these terminals. Ensure correct polarity.
• Ingresso (RCA o livello altoparlante): Use RCA cables for low-level inputs from an aftermarket head unit or speaker-level inputs for factory radios.
• Remote Control (RBC): Connect the wired remote bass knob to the designated port for convenient bass level adjustment.

4. Funzionamento del Amppiù vivace

Una volta installato, regolare il amplifier settings to match your audio system and personal preferences.

4.1 Regolazione del guadagno

Set the gain control to match the output voltage dell'unità principale. Inizia con il guadagno al minimo e aumentalo lentamente fino a raggiungere il volume desiderato senza distorsioni.

4.2 Filtro passa-basso (LPF)

The LPF controls the upper frequency limit of the audio signal sent to the subwoofer. Adjust this to blend the subwoofer's output seamlessly with your full-range speakers.

4.3 potenziamento dei bassi

The variable bass boost allows you to increase the bass output at a specific frequency. Use this sparingly to avoid distortion and potential damage to your subwoofer.

Interruttore trifase

The phase switch (0°/180°) helps ensure that the subwoofer's output is in phase with the rest of your speakers, providing a more cohesive and impactful bass response.

4.5 RBC Wired Remote

Use the wired remote to conveniently adjust the subwoofer's output level from your driving position.

5. Manutenzione

The Infinity Reference-6001A amplifier requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they are secure and free from corrosion. Do not use harsh chemicals or abrasive cleaners.

6. Risoluzione Dei Problemi

Se riscontri problemi con il tuo amplifier, consult the following guide before seeking professional service.

6.1 Protection LED Indicator

IL amplifier features an LED indicator that illuminates when the on-board protection circuitry is activated due to shorts, high temperature, overvoltage, o sottovolumetage. If the LED is lit, check the following:

• Corto circuito: Inspect speaker wiring for any shorts to ground or between positive and negative terminals.
• Surriscaldamento: Assicurare il amplifier has adequate ventilation. Allow the unit to cool down.
• Voltage Problemi: Verificare il volume della batteria del veicolotage is within the operating range (typically 11V-16V).

6.2 Problemi comuni

• Nessun potere: Check the main fuse, power cable connection, ground connection, and remote turn-on wire.
• Nessun suono: Verify input signal connections (RCA or speaker level), speaker connections, and amplifier gain settings. Check head unit output.
• Suono distorto: Reduce gain setting, check speaker impedance, and ensure bass boost is not set too high.

Figura 3: In basso view del amplifier, showing the model and serial number label.

7. Specifiche

8. Informazioni sulla garanzia

Infinity products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Infinity websito per informazioni dettagliate sulla garanzia.

9. Assistenza clienti

For technical assistance, troubleshooting, or warranty claims, please contact Infinity customer support. You can find contact information on the official Infinity websito o tramite il tuo rivenditore autorizzato.

Websito: www.infinityspeakers.com