THRONMAX M20 USB Microphone Kit User Manual

Introduzione

This manual provides comprehensive instructions for the setup, operation, and maintenance of your THRONMAX M20 USB Microphone Kit. Please read thoroughly before use to ensure optimal performance and longevity of your device.

Contenuto della confezione

Your THRONMAX M20 USB Microphone Kit includes the following components:

• THRONMAX M20 Condenser Microphone
• USB Cable (Type-C to USB 2.0)
• Braccio regolabile
• Scrivania Clamp for Boom Arm
• Supporto antiurto
• Filtro pop
• Parabrezza in schiuma

Istruzioni di installazione

1. Attacca scrivania Clamp: Fissare la scrivaniaamp to the edge of your desk. Ensure it is tightened firmly to provide a stable base for the boom arm.
2. Install Boom Arm: Insert the base of the adjustable boom arm into the desk clamp. Adjust the arm's position and tension as needed for your desired setup.
3. Assemble Shock Mount: Attach the shock mount to the end of the boom arm. The shock mount helps isolate the microphone from vibrations and handling noise.
4. Inserisci microfono: Gently squeeze the clips of the shock mount and insert the THRONMAX M20 microphone. Ensure it is securely held.
5. Applicare la schiuma per parabrezza: Slide the foam windscreen over the microphone capsule. This reduces plosive sounds and protects the microphone.
6. Applica filtro anti-pop: Secure the pop filter to the boom arm, positioning it a few inches in front of the microphone. The pop filter further minimizes plosives and sibilance.
7. Collegare il cavo USB: Connect the USB Type-C end of the provided cable to the microphone and the USB 2.0 end to an available USB port on your computer (PC or Mac OS). The microphone is plug-and-play and does not require additional driver software or an external sound card.

Istruzioni per l'uso

Funzionamento di base:

• Collega e usa: Once connected via USB, your computer should automatically recognize the THRONMAX M20 as an audio input device.
• Select as Input Device: In your operating system's sound settings or your recording/streaming software, select "THRONMAX M20" as the primary microphone input.
• Adjust Input Level: Monitor your audio levels in your software and adjust the microphone's input gain as necessary to prevent clipping or distortion.

Caratteristiche principali:

• Professional Sound Chipset: The integrated 96kHz/24bit professional sound chipset ensures high-resolution audio capture.
• 16mm Transsound Condenser Capsule: Provides a strong bass response and captures crystal-clear audio.
• Retroilluminazione RGB: The M20 features 24 modes of RGB LED lighting, which can be customized or turned off according to user preference. Refer to the device's physical controls or accompanying software (if any) for RGB adjustment.
• Double Shielding USB Cable: The included USB cable is double-shielded to reduce interference and ensure a clean audio signal.

Manutenzione

• Pulizia: Use a soft, dry cloth to wipe down the microphone body and stand. Avoid using liquid cleaners directly on the microphone.
• Parabrezza in schiuma: The foam windscreen can be gently hand-washed with mild soap and water, then air-dried completely before re-use.
• Magazzinaggio: When not in use, store the microphone and its components in a clean, dry place to prevent dust accumulation and potential damage.
• Cura del cavo: Avoid sharp bends or kinks in the USB cable to prevent internal wire damage.

Risoluzione dei problemi

• Nessuna uscita audio:
  • Assicurarsi che il cavo USB sia collegato saldamente sia al microfono che al computer.
  • Verify that "THRONMAX M20" is selected as the input device in your computer's sound settings and your recording software.
  • Check the input gain level in your software; it might be set too low.
• Audio distorto:
  • Reduce the input gain level in your software or on the microphone itself (if applicable) to prevent clipping.
  • Ensure the microphone is not too close to the sound source.
• Rumore di fondo/ronzio:
  • Ensure the double-shielded USB cable is used.
  • Try connecting the microphone to a different USB port or a different computer to rule out port-specific issues.
  • Minimize other electronic devices near the microphone that might cause interference.
• Microfono non riconosciuto:
  • Riavvia il computer.
  • Prova un'altra porta USB.
  • Assicurati che il tuo sistema operativo sia aggiornato.

Specifiche

Garanzia e supporto

For warranty information and technical support, please refer to the official THRONMAX webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Risorse online e FAQ potrebbero essere disponibili anche su THRONMAX Store Page.