Manuale utente del supporto universale per smartphone da auto Veho TA-9

Introduzione

Grazie per l'acquistoasing the Veho TA-9 Universal In-Car Smartphone Holder. This manual provides detailed instructions for the setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure proper functionality and safety.

Contenuto della confezione

• Veho TA-9 Smartphone Cradle
• Windscreen Suction Cup Mount
• Air Vent Fixing Mount
• Manuale d'uso

Prodotto finitoview

Figure 1: Veho TA-9 smartphone cradle with its adjustable arms extended, ready to hold a device.

Figure 2: Veho TA-9 smartphone cradle with its adjustable arms retracted, showing its compact form.

Figure 3: The windscreen suction cup mount, featuring a strong suction base and an adjustable arm with a ball joint for flexible positioning.

Figure 4: The air vent fixing mount, designed to securely attach the cradle to most vehicle air vents.

Istruzioni di installazione

Attaching the Cradle to a Mount

Both the windscreen suction cup mount and the air vent mount connect to the cradle via a ball joint mechanism. To attach:

1. Unscrew the collar nut from the mount's ball joint.
2. Place the collar nut over the ball joint on the back of the cradle.
3. Push the ball joint firmly into the socket on the back of the cradle until it clicks into place.
4. Tighten the collar nut to secure the cradle to the mount.

Windscreen Suction Cup Mount Installation

Figure 5: The Veho TA-9 cradle securely attached to the windscreen suction cup mount, ready for installation.

1. Choose a clean, smooth, and flat surface on your windscreen or dashboard. Ensure it does not obstruct your view o interferire con gli airbag.
2. Clean the chosen surface thoroughly to remove any dust or grease.
3. Premere saldamente la ventosa contro la superficie.
4. Push down the lever on the suction cup base to create a vacuum seal and secure the mount.
5. Adjust the angle of the cradle using the adjustable arm and ball joint for optimal viewing.

Air Vent Fixing Mount Installation

Figure 6: The Veho TA-9 cradle attached to the air vent mount, demonstrating its compact profile quando installato.

1. Locate a suitable air vent in your vehicle. Ensure the vent blades are sturdy enough to support the weight of your device and the mount.
2. Gently push the prongs of the air vent mount into the air vent blades.
3. Ensure the mount is securely seated and does not wobble.
4. Adjust the angle of the cradle using the ball joint for optimal viewing.

Istruzioni per l'uso

Inserimento dello smartphone

Figure 7: A smartphone securely held within the Veho TA-9 cradle, demonstrating its adjustable grip.

1. Gently pull open the adjustable arms of the cradle.
2. Place your smartphone into the cradle, ensuring it rests on the bottom support.
3. Release the arms slowly so they securely grip your smartphone. The cradle is compatible with smartphones ranging from 43mm to 93mm in width.
4. Ensure the phone is firmly held before driving.

Regolazione Viewangolo di ing

The Veho TA-9 features a 360° rotatable ball joint, allowing you to adjust your smartphone to any desired viewing angle (portrait or landscape). Loosen the collar nut slightly, adjust the angle, and then tighten the collar nut to lock it in place.

Manutenzione

• Pulizia: Wipe the cradle and mounts with a soft, damp panno. Non usare detergenti abrasivi o solventi.
• Ventosa: If the suction cup loses its grip, rinse it with warm water and let it air dry. This can restore its adhesive properties.
• Magazzinaggio: When not in use, store the holder in a cool, dry place away from direct sunlight and extreme temperatures.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

Veho products are designed to meet high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Veho websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Websito: www.veho-world.com