1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of the Visionis VIS-3002 FPC-5674 Access Control Keypad System. This standalone indoor access control system features a digital touch keypad, a mini controller, Wiegand 26 compatibility, and supports EM cards and key fobs for up to 1000 users. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:
- (1) VIS-3002 Access Control Indoor Only Digital Touch Keypad + Reader Standalone
- (1) VIS-MINI-CNTRL: 1 Door Controller for Access Control Systems
- (10) VS-VIS-KEYTAG: Access Control Proximity Contactless Smart Entry Keyfobs (26 bit, 125khz)
- (1) VISCP200: 12V 2Amp Power Supply Transformer (UL Listed)
- Viti di montaggio e tasselli a parete
- Cacciavite
- Cablaggio elettrico
- Diode IN4004 (for relay circuit protection)
- Master Add Card
- Master Delete Card
Figure 2.1: Visionis VIS-3002 Kit Contents, including the mini controller, remote control, Master Add Card, Master Delete Card, Diode IN4004, self-tapping screws, wall anchors, and screwdriver.
Figure 2.2: Visionis VIS-3002 Keypad System components including keypad, mini controller, power supply, and key fobs.
3 Caratteristiche
- Capacità utente: Supporta fino a 1000 utenti.
- Modalità di accesso: PIN code, proximity card, and/or proximity key tag.
- Mini Controller (VIS-MINI-CNTRL): Provides enhanced security by storing credentials internally, preventing tampering with the external keypad.
- Wiegand 26 Input/Output: Compatible with various Wiegand readers.
- Anti Tampehm Allarme: Activates if the keypad is illegally removed.
- Tastiera retroilluminata: Easy to operate in low-light conditions.
- Supporto per carte: 125KHz for EM cards and 13.56MHz for MFR cards.
- External Wired Doorbell Support: Allows connection of an external doorbell.
- Lettura veloce: Searching time less than 0.1s after reading a card.
- microprocessore: Built-in USA Atmel microprocessor for high security and reliability.
Video 3.1: Prodotto ufficiale finitoview video for the Visionis VIS-3002 Access Control Keypad System, demonstrating its features and components.
Figure 3.2: Illustration of access methods for the Visionis VIS-3002 keypad: card, PIN code, and NFC phone access.
4. Specifiche
| Specificazione | Dettaglio |
|---|---|
| Modello | VIS-3002 FPC-5674 |
| Marca | Visionis |
| Fonte di alimentazione | Corded Electric (12V 2Amp) |
| Tecnologia di connettività | Cablato |
| Metodo di controllo | Tocco |
| Capacità dell'utente | 1000 Utenti |
| Interfaccia Wiegand | Wiegand 26 |
| Frequenza della carta | 125KHz (EM cards), 13.56MHz (MFR cards) |
| Temperatura di esercizio | Temperatura di funzionamento: da -45°C a 55°C (da -49°F a 131°F) |
| Umidità di esercizio | 0% ~ 95% |
| Keypad Dimensions (H x W x D) | 116 mm (4.56 pollici) x 71 mm (2.79 pollici) x 22 mm (0.86 pollici) |
| Mini Controller Dimensions (L x W x H) | 65 mm (2.56 pollici) x 54 mm (2.13 pollici) x 19 mm (0.75 pollici) |
Figure 4.1: Dimensions of the Visionis VIS-3002 keypad: 116mm (4.56in) height, 71mm (2.79in) width, 22mm (0.86in) depth.
Figure 4.2: Dimensions of the Visionis VIS-MINI-CNTRL mini controller: 65mm (2.56in) length, 54mm (2.13in) width, 19mm (0.75in) height.
5. Configurazione e installazione
5.1 Considerazioni sulla sicurezza
For optimal security, the VIS-MINI-CNTRL mini controller should be installed inside a restricted, secure area. All user credentials are stored on the mini controller, not on the external keypad. This prevents unauthorized access even if the external keypad is tampmodificato o rimosso.
Figure 5.1: Illustration of secure installation, with the mini controller installed inside a restricted area, controlling the locking device.
5.2 Cablaggio del sistema
The VIS-3002 keypad connects to the VIS-MINI-CNTRL mini controller via a Wiegand 26 interface. The mini controller then manages the locking device (e.g., magnetic lock, electric strike) and other peripherals like an exit button or doorbell.
- Connect the keypad's Wiegand output (D0, D1) to the mini controller's Wiegand input.
- Connect the 12V DC power supply to the mini controller.
- Wire the locking device to the NO (Normally Open) or NC (Normally Closed) terminals on the mini controller, as required by your lock type. Ensure the Diode IN4004 is installed across the lock terminals for relay protection.
- Connect an exit button to the 'OPEN' terminal and GND on the mini controller.
- Connect an external doorbell to the appropriate terminals if desired.
Figure 5.2: Diagram showing the Visionis VIS-MINI-CNTRL mini controller connected to various Wiegand readers, illustrating its versatility.
Figure 5.3: Internal board view e lato view of the Visionis VIS-MINI-CNTRL mini controller, showing connection points.
Figure 5.4: The 12V 2Amp power supply transformer included with the Visionis VIS-3002 system.
6. Funzionamento
6.1 Aggiunta di utenti
Use the Master Add Card to enroll new proximity cards or key fobs. Follow the specific programming instructions provided with your mini controller for adding user PINs.
6.2 Ottenere l'accesso
Gli utenti possono accedere utilizzando uno dei seguenti metodi:
- Codice PIN: Enter your assigned PIN code on the keypad.
- Proximity Card/Key Fob: Present your registered card or key fob to the keypad reader.
- Carta + PIN: For enhanced security, some configurations may require both a card/key fob and a PIN code.
The keypad features a backlight for easy visibility and operation at night.
6.3 Exiting
To exit, press the connected exit button or use the remote control if configured.
7. Manutenzione
- Pulizia: Wipe the keypad surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Verifica della connessione: Controllare periodicamente tutti i collegamenti elettrici per assicurarsi che siano saldi e privi di corrosione.
- Aggiornamenti del firmware: Check the Visionis websito per eventuali aggiornamenti firmware disponibili per il tuo sistema.
8. Risoluzione Dei Problemi
- Nessun potere: Ensure the 12V 2Amp power supply is correctly connected and receiving power. Check all wiring.
- Tastiera non reattiva: Verify power supply. If the keypad is completely unresponsive, check for loose connections or damage.
- Accesso negato: Ensure the card/key fob is correctly enrolled. Verify the PIN code is correct. Check if the user capacity has been reached.
- Anti Tampehm Allarme: If the alarm sounds, it indicates the keypad has been illegally removed or tampered with. Re-secure the keypad and reset the system if necessary.
- Porta non sbloccata: Check the wiring to the locking device and ensure it is receiving power from the mini controller. Verify the lock type (NO/NC) matches the controller's configuration.
For further assistance, please contact Visionis customer support.
9. Garanzia e supporto
Visionis products are designed for reliability and performance. For warranty information and technical support, please refer to the official Visionis webo contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
