Introduzione
This manual provides instructions for the safe installation, operation, and maintenance of your EGLO Palmaves 1 LED Ceiling Light. Please read these instructions carefully before installation and retain them for future reference. This LED ceiling light features dimmable functionality, adjustable color temperature from warm white to cool white, RGB color options, a night light mode, and is controlled via an included remote.
Image: The EGLO Palmaves 1 LED Ceiling Light, featuring two interconnected rings, installed on a ceiling in a modern living space.
Configurazione e installazione
Installation should be performed by a qualified electrician in accordance with local wiring regulations. Always ensure the main power supply is disconnected before commencing any electrical work.
Contenuto della confezione:
- EGLO Palmaves 1 LED Ceiling Light fixture
- Telecomando
- Materiale di montaggio (viti, tasselli)
- Istruzioni di montaggio (questo documento)
Montaggio dell'apparecchio:
- La sicurezza prima di tutto: Turn off the power at the main circuit breaker before installation.
- Preparare la superficie di montaggio: Mark the drilling points on the ceiling using the fixture's mounting bracket as a template.
- Fori di perforazione: Praticare dei fori nei punti contrassegnati e inserire i tasselli appropriati.
- Collegare il cablaggio: Connect the household electrical wires to the fixture's terminal block. Ensure correct polarity (Live, Neutral, Earth).
- Dispositivo sicuro: Attach the mounting bracket to the ceiling using screws. Secure the light fixture to the mounting bracket.
- Ripristina alimentazione: Una volta completata l'installazione e verificati tutti i collegamenti, ripristinare l'alimentazione all'interruttore principale.
Installazione della batteria del telecomando:
The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.
Istruzioni per l'uso
The EGLO Palmaves 1 LED Ceiling Light is controlled using the provided 2.4G RF remote control. Ensure the remote has fresh batteries and is within range of the light fixture.
Image: The white remote control for the EGLO Palmaves 1 LED Ceiling Light, showing buttons for power, brightness, color temperature, night light, and timer functions.
Funzioni del telecomando:
- ACCESO/SPENTO: Premere per accendere o spegnere la luce.
- B- / B+: Adjust brightness levels. B- decreases brightness, B+ increases brightness.
- WW (bianco caldo): Adjusts the color temperature towards warmer tones (e.g., 3000 Kelvin).
- CW (bianco freddo): Adjusts the color temperature towards cooler tones (e.g., 6500 Kelvin).
- Modalità luce notturna: Activates a low-brightness setting (approximately 10% intensity) suitable for night use.
- Timer: Activates a 30-minute auto-off function. The light will turn off automatically after 30 minutes.
- Colore RGB: This model supports RGB color changing. Specific buttons or combinations on the remote will cycle through or select various RGB colors. Refer to the remote's markings for exact RGB control.
Cura e manutenzione
Proper care ensures the longevity and optimal performance of your EGLO Palmaves 1 LED Ceiling Light.
- Pulizia: Scollegare l'alimentazione prima della pulizia. Utilizzare un panno morbido, asciutto o leggermenteamp cloth to wipe the surface of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- LED: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light fixture to replace LEDs.
- Ispezione generale: Controllare periodicamente l'apparecchio per verificare la presenza di eventuali danni o collegamenti allentati. In caso di problemi, scollegare l'alimentazione e consultare un elettricista qualificato.
Risoluzione dei problemi
If you encounter issues with your EGLO Palmaves 1 LED Ceiling Light, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Nessuna alimentazione elettrica. Le batterie del telecomando sono scariche. Telecomando non accoppiato. | Controllare l'interruttore automatico e l'interruttore a parete. Sostituire le batterie del telecomando (2 AAA). Refer to remote control pairing instructions (if applicable, usually involves turning light on/off and pressing a button on remote within seconds). |
| La luce non risponde al telecomando. | Remote control batteries are low/dead. Ostruzione tra il telecomando e la luce. Telecomando non accoppiato. | Sostituire le batterie del telecomando. Ensure clear line of sight to the light fixture. Re-pair the remote control with the light. |
| Light flickers or has inconsistent brightness. | Alimentazione instabile. Collegamento del cablaggio allentato. | Consult a qualified electrician to check the electrical supply. Disconnect power and check wiring connections (only by a qualified person). |
Specifiche
Detailed technical specifications for the EGLO Palmaves 1 LED Ceiling Light.
Image: A technical diagram illustrating the dimensions of the EGLO Palmaves 1 LED Ceiling Light, showing diameters of 29 cm and 39 cm, and a height of 7 cm.
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | 75555 |
| Dimensioni (L x P x A) | 45 x 30 x 12 cm (overall); Large element: Ø 39 cm; Small element: Ø 29 cm; Height: 7 cm |
| Peso | 994 grammi |
| Fonte di alimentazione | AC Power (240 Volts) |
| Cosatage | 21.6 Watt (massimo) |
| Flusso luminoso | 2940 lumen (massimo) |
| Temperatura del colore | 3000K (bianco caldo) - 6500K (bianco freddo), RGB |
| Dimmerabile | SÌ |
| Metodo di controllo | Remote Control (2 AAA batteries required) |
| Materiale | Aluminum, Alloy Steel, Plastic |
| Forma dell'apparecchio | Plafoniera tonda |
| Tipo di installazione | Flush Mount |
| Uso interno/esterno | Solo al chiuso |
| Classe energetica | E |
| Paese di origine | Cina |
Informazioni sulla garanzia
The EGLO Palmaves 1 LED Ceiling Light comes with a limited warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty documentation provided with your purchase or contact EGLO customer service. Keep your proof of purchase for warranty claims.
Assistenza clienti
If you require further assistance, have questions not covered in this manual, or need to report a defect, please contact EGLO customer service. Contact information can typically be found on the EGLO websul sito o sulla confezione del prodotto.
Websito: www.eglo.com
