Manuale utente del case PC mid-tower Sharkoon RGB SLIDER WT

1. Introduzione

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view dei componenti interni.

Immagine 1.1: Lato anteriore view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. Contenuto della confezione

Si prega di verificare che tutti gli articoli siano presenti nel pacco:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. Specifiche

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Configurazione e installazione

4.1. Preparazione

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Installazione della scheda madre

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. Fissare la scheda madre utilizzando le viti fornite.

Immagine 4.1: Interno view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Installazione dell'unità di alimentazione (PSU)

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. Fissare l'alimentatore con le viti dalla parte posteriore del case.

4.4. Installazione del dispositivo di archiviazione

The case supports 3.5" HDDs and 2.5" SSDs.

• HDD da 3.5": Install into the drive cage located within the PSU tunnel.
• SSD da 2.5": Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Immagine 4.2: Interno posteriore view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Installazione della scheda di espansione (ad esempio, GPU)

1. Rimuovere le coperture degli slot PCIe necessari dalla parte posteriore del case.
2. Inserire la scheda di espansione nello slot PCIe corrispondente sulla scheda madre.
3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• Ventole anteriori: Remove the front panel to access the mounting points for up to three 120mm fans.
• I migliori fan: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Gestione dei cavi

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Istruzioni per l'uso

5.1. Accensione

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Immagine 5.1: In alto view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. Controllo dell'illuminazione RGB

The front RGB LED strip can be controlled in two ways:

• Controller integrato: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• Sincronizzazione ARGB della scheda madre: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

Il pannello I/O frontale fornisce un comodo accesso a:

• 2x USB 3.0 ports for high-speed data transfer.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. Manutenzione

6.1. Pulizia

• Esterno: Pulire le superfici esterne con un panno morbido, damp stoffa. Evitare detergenti abrasivi.
• Filtri antipolvere: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• Interno: Utilizzare aria compressa per rimuovere la polvere dai componenti interni e dalle pale della ventola. Assicurarsi che il sistema sia spento e scollegato prima di pulire l'interno.

6.2. Flusso d'aria

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. Risoluzione Dei Problemi

7.1. Il sistema non si accende

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the 'ON' position.
• Verificare che il cavo del pulsante di accensione del pannello frontale sia collegato correttamente al connettore del pannello frontale della scheda madre.
• Verificare che tutti i collegamenti di alimentazione interna (ATX a 24 pin, alimentazione CPU, alimentazione GPU) siano sicuri.

7.2. Le ventole non girano

• Controllare i collegamenti di alimentazione della ventola alla scheda madre o al controller della ventola.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. L'illuminazione RGB non funziona

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Front Panel USB/Audio Ports Not Functioning

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. Garanzia e supporto

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon websito: www.sharkoon.com