Juno WF4 REG SWW5 90CRI MW M6

Juno LED Recessed Lights User Manual

Model: WF4 REG SWW5 90CRI MW M6

Marca: Giunone

1. Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Juno Regressed Wafer Recessed LED Downlight. Designed for versatility and ease of installation, this canless downlight offers five switchable white color temperatures to suit various environments. Its slim design and wet location rating make it suitable for a wide range of indoor and outdoor residential applications.

2. Informazioni sulla sicurezza

ATTENZIONE: Rischio di scossa elettrica. Scollegare l'alimentazione dall'interruttore automatico prima dell'installazione o della manutenzione.

Always wear appropriate personal protective equipment, including safety glasses, when working with electrical components and tools. Ensure all wiring is performed in accordance with local electrical codes and regulations. If you are unsure about any part of the installation process, consult a qualified electrician.

Video: Installation Guide for LED Ultra-Thin Wafer Downlight. This video demonstrates the complete installation process, including crucial safety steps like turning off power at the main breaker and wearing eye protection.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione:

  • Juno LED Recessed Downlight Module (4-Inch)
  • Scatola del driver remoto
  • Foglio di istruzioni per l'installazione
  • Hole Template (for new installations)
  • Wago Connectors (pre-installed or included)
Juno LED Recessed Downlight module and remote driver box

Immagine: The Juno LED Recessed Downlight module connected to its remote driver box, illustrating the main components included in the package.

Video: 360 gradi view of the Juno Round Baffle LED Downlight, providing a comprehensive visual of the product design.

4. Istruzioni per l'installazione

  1. Spegnimento dell'alimentazione: Prima di iniziare, assicurarsi che l'alimentazione elettrica dell'area di installazione sia interrotta tramite l'interruttore generale.
  2. Prepare the Ceiling Hole:
    • If replacing an existing fixture, ensure the hole size is appropriate for the 4-inch downlight. The outer rim of the luminaire should cover the hole while allowing the spring clips to secure firmly.
    • For new installations, use the provided hole template or a drill saw with the correct diameter (refer to specifications for exact dimensions) to cut a clean opening in the ceiling.
    Dimensions of the Juno LED Recessed Downlight and driver box

    Immagine: Detailed dimensions of the 4-inch Regressed Wafer Downlight and its remote driver box, crucial for accurate hole cutting.

  3. Wire the Remote Driver Box:
    • Open the cover of the remote driver box and remove one of the knockouts.
    • Locate the power supply leads (black, white, and green/ground wires) from the ceiling.
    • Connect the black wire from the driver box to the live wire from the power supply using a Wago connector.
    • Connect the white wire from the driver box to the neutral wire from the power supply using a Wago connector.
    • Connect the green wire (ground) from the driver box to the ground wire from the power supply using a Wago connector.
    • Ensure all connections are secure and made inside the driver box. Close the cover of the driver box.
  4. Place the Driver Box and Install the Downlight:
    • Carefully push the remote driver box through the cutout hole and lay it on the ceiling above the drywall.
    • Hold the spring clips on the LED module upwards and insert the module into the hole.
    • Once inserted, the spring clips will automatically secure the module firmly against the ceiling.
  5. Ripristina alimentazione: Turn the electricity back on at the circuit breaker. Verify that the downlight illuminates.

5. Istruzioni per l'uso

Your Juno LED Recessed Downlight features a 5-in-1 switchable white color temperature. This allows you to select the desired light color to match your room's ambiance.

  • Selezione temperatura colore: The integrated switch on the remote driver box allows you to toggle between five color temperatures:
    • 2700K bianco morbido
    • Bianco caldo 3000K
    • Neutro 3500K
    • Bianco freddo 4000K
    • Luce diurna 5000K

    Note: The color temperature must be selected on the driver box before the light is installed in the ceiling.

  • dimming: This downlight is dimmable down to 10% with compatible triac dimmers. Ensure you use a dimmer switch that is compatible with LED lighting for optimal performance.
Juno LED Downlight with switchable color temperature options

Immagine: The remote driver box showing the switch for selecting one of the five color temperatures.

Examples of different color temperatures in a kitchen setting

Immagine: Visual guide demonstrating the appearance of 2700K, 3000K, 3500K, 4000K, and 5000K color temperatures in a typical kitchen environment.

6. Manutenzione

The Juno LED Recessed Downlight requires minimal maintenance. To clean the fixture, ensure power is off at the circuit breaker, then gently wipe the surface with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or optical components.

7. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
La luce non si accende.No power at the fixture; loose wiring connection; faulty fixture.Check circuit breaker. Verify all wire connections are secure. Test fixture with a known good power source.
La luce tremola o si attenua in modo incoerente.Interruttore dimmer incompatibile; cablaggio allentato; fluttuazioni di potenza.Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician if power fluctuations are suspected.
Temperatura del colore errata.L'interruttore della temperatura del colore è impostato in modo errato.Turn off power, remove fixture, adjust the switch on the driver box to the desired setting, then reinstall.

8. Specifiche

CaratteristicaDettaglio
MarcaGiunone
Nome del modelloGUIDATO
Misurare4 pollici
ColoreBianco opaco
MaterialeAlluminio, Policarbonato
Dimensioni del prodotto5 cm L x 5 cm P x 1.4 cm A
Tipo di sorgente luminosaGUIDATO
Colore chiaroSwitchable (2700K, 3000K, 3500K, 4000K, 5000K)
Luminosità670 lumen
Cosatage65 watts (replaces 65W incandescent)
Voltage120 Volt
DimmerabileYes, down to 10% with triac dimmers
Vita quotata50,000 ore
CertificazioniENERGY STAR, Air-Loc, CSA, IC Rated
Uso interno/esternoOutdoor, Indoor (Wet Location Rated)

9. Garanzia

This Juno LED Recessed Downlight is backed by a Garanzia limitata del produttore di 3 anno. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official product documentation or contact Juno customer support.

10. Supporto

For further assistance, technical support, or to access additional resources, please visit the official Juno website or refer to the provided PDF documents:

Puoi anche visitare il Juno Store on Amazon per ulteriori informazioni sul prodotto.

Documenti correlati - WF4 REG SWW5 90CRI MW M6

Preview Modulo LED rotondo mini regredito Juno Ultra-Thin Wafer - Guida all'installazione
Istruzioni di installazione complete per il modulo LED rotondo mini regressivo ultrasottile Juno. Questa guida illustra le caratteristiche del prodotto, le precauzioni di sicurezza, l'installazione passo passo e la risoluzione dei problemi per i downlight LED con temperatura di colore commutabile.
Preview Modulo LED rotondo Juno Wafer Deep Regressed - Istruzioni per l'installazione
Guida completa all'installazione del modulo LED rotondo Wafer Deep Regressed di Juno (WF4 DREG XX ALO 19 SWW5, WF6 DREG XX ALO20 SWW5). Scopri come installare questo downlight a risparmio energetico con CCT e lumen commutabili, incluse precauzioni di sicurezza, istruzioni dettagliate e suggerimenti per la risoluzione dei problemi. Adatto a diversi tipi di soffitto e conforme al Titolo 24 della California.
Preview Guida all'installazione del kit di finitura per faretti LED Juno RetroBasics
Istruzioni di installazione complete per i kit di finitura per downlight a LED Juno RetroBasics da 4 pollici e 5/6 pollici (serie RB), che comprendono informazioni sul prodotto, linee guida di sicurezza, collegamenti elettrici, fasi di installazione, compatibilità e consigli sulla regolazione dell'intensità luminosa.
Preview Alloggiamento per illuminazione da incasso a incandescenza quadrata da 8 pollici Juno TC6 - Installazione e specifiche
Specifiche dettagliate, guida all'installazione e codici prodotto per l'alloggiamento quadrato per illuminazione a incandescenza da incasso Juno TC6 da 8 pollici. Le caratteristiche includono ganci Real Nail a 3 barre, protezione termica e compatibilità con lampade A19 da 100 W.amps.
Preview Istruzioni per l'installazione del kit di finiture LED Juno RetroBasics (4" e 5/6")
Guida completa all'installazione per i kit di finiture regolabili a LED Juno RetroBasics™ da 4 pollici e 5/6 pollici (serie RBA). Include avvertenze di sicurezza, dettagli sul prodotto, passaggi di installazione, compatibilità e regolazione della temperatura del colore.
Preview Istruzioni per l'installazione della serie di finiture retrofit Juno 6RLC
Guida completa all'installazione per la serie di finiture retrofit a LED Juno 6RLC, una soluzione di illuminazione da incasso da 6 pollici. Questo documento fornisce avvertenze di sicurezza essenziali, dettagli sul prodotto, controlli di compatibilità e istruzioni dettagliate per l'installazione. Nota: questo prodotto non è più disponibile.