TP-Link RE315 AC1200 Dual-Band Wireless Mesh Wi-Fi Range Extender - Instruction Manual

Introduzione

The TP-Link RE315 AC1200 Dual-Band Wireless Mesh Wi-Fi Range Extender is designed to expand your existing Wi-Fi coverage, eliminate dead zones, and provide reliable internet access throughout your home. This device supports dual-band Wi-Fi (2.4GHz and 5GHz) for flexible connectivity and can operate in both Range Extender and Access Point modes. It is compatible with all Wi-Fi-enabled devices and most Wi-Fi routers or access points.

Prodotto finitoview

The RE315 features external antennas for enhanced signal, a WPS button for quick setup, a reset button, and a Fast Ethernet Port for wired connections.

Immagine: TP-Link RE315 Extender highlighting its external antennas, WPS button, reset button, and Fast Ethernet Port. The device is white with ventilation grilles on the sides.

Caratteristiche principali

• Copertura Wi-Fi estesa: Boosts internet Wi-Fi coverage up to 1500 square feet and connects up to 25 devices.
• Connettività doppia banda: Supports 2.4GHz (up to 300Mbps) and 5GHz (up to 867Mbps) for flexible and fast connections.
• Porta Ethernet veloce: Provides wired speed and reliability for devices like Blu-ray players, game consoles, or smart TVs.
• Modalità punto di accesso: Converts a wired internet connection into a wireless access point.
• Compatibilità universale: Works with all Wi-Fi-enabled devices and most Wi-Fi routers or access points.
• TP-Link OneMesh Support: Creates a Mesh network when connected to a OneMesh router for seamless whole-home coverage.
• Configurazione semplice: Can be set up and managed quickly using the TP-Link Tether app (Android, iOS) or via WPS button.
• Indicatore di segnale intelligente: Aiuta a trovare la posizione ottimale per la migliore connessione Wi-Fi.

Guida all'installazione

Follow these steps to set up your TP-Link RE315 Wi-Fi Range Extender:

1. Accensione: Plug the extender into a power outlet near your existing Wi-Fi router. Wait for approximately one minute until the Power LED turns solid on.
2. Connettiti all'Extender: Use the TP-Link Tether app (recommended) or the WPS button method.

Metodo 1: tramite l'app TP-Link Tether

• Scarica il App TP-Link Tether dall'App Store o da Google Play.
• Launch the Tether app and log in with your TP-Link ID. If you don't have one, create an account.
• Tocca il + icon to add a new device and select Range Extender.
• Follow the in-app instructions to complete the setup. You will be prompted to connect to the extender's temporary Wi-Fi network and then select your main Wi-Fi network(s) (2.4GHz and/or 5GHz) to extend.
• Create a local password for the extender if prompted.

Metodo 2: tramite pulsante WPS

• Premere il tasto Pulsante WPS sul tuo router.
• Entro due minuti, premere il tasto Pulsante WPS on the side of your RE315 extender for one second.
• Wait for the 2.4GHz and 5GHz LEDs on the extender to turn solid blue, indicating a successful connection.

After successful setup, the extender's Wi-Fi network names will typically be your router's network name with '_EXT' appended (e.g., 'MyWiFi_EXT' or 'MyWiFi_5GEXT'). The password will be the same as your router's Wi-Fi password.

Immagine: Diagram illustrating the TP-Link OneMesh setup, showing a router connected to a range extender to provide Wi-Fi coverage throughout a home, with features like Smart Roaming and One Wi-Fi Name.

Posizionamento ottimale

For optimal performance, plug the extender into a power outlet halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router. The intelligent signal indicator on the extender will help you find the best spot:

• LED blu: Segnale forte.
• LED rosso: Weak signal (too far from the router).

Immagine: TP-Link RE315 Extender with a close-up of its intelligent signal indicator. It shows a white light for a strong signal and a red light for a weak signal, guiding users to optimal placement.

Modalità operative

Modalità Range Extender

In this mode, the RE315 extends your existing Wi-Fi network's coverage, eliminating Wi-Fi dead zones. It connects wirelessly to your router and re-broadcasts the signal to areas with poor coverage.

Modalità Access Point

The Ethernet port of the RE315 can easily turn your wired internet connection into a wireless access point. This is useful for creating a new Wi-Fi network in a room where only a wired connection is available, or for connecting wired devices to your Wi-Fi network.

Specifiche

Risoluzione dei problemi

If you experience any issues during or after setup, please consider the following:

• Nessun LED di alimentazione: Assicurarsi che l'extender sia collegato saldamente a una presa di corrente funzionante.
• Weak Signal (Red LED): Relocate the extender closer to your main router. Ensure it's within the router's Wi-Fi range.
• Problemi di connessione: Try restarting both your router and the extender. Verify that you have entered the correct Wi-Fi password during setup.
• L'app non trova il dispositivo: Ensure your smartphone is connected to the extender's temporary Wi-Fi network (e.g., 'TP-Link_Extender') before attempting to add it in the Tether app. Turn off data traffic and VPN services on your phone/tablet, then try again.

For more detailed troubleshooting or technical assistance, refer to the TP-Link support websito o contattare il loro team di supporto tecnico.

Garanzia e supporto

TP-Link offre un Garanzia di 2 anno E supporto tecnico gratuito 24 ore su 24, 7 giorni su 7 for this product. If you experience any trouble during or after set up, please contact TP-Link directly for assistance.