Hafele Loox5 LED 2060 Strip Light Instruction Manual

1. Introduzione

The Hafele Loox5 LED 2060 Strip Light is a flexible, dimmable 12V LED ribbon designed for functional and indirect lighting applications. It is ideal for use within furniture, cabinets, and display cases, providing high-quality illumination with a high Color Rendering Index (CRI) of >90 for accurate color representation.

This manual provides essential information for the safe and correct installation, operation, and maintenance of your LED strip light.

Hafele Loox5 LED 2060 Strip Light installed in a wooden shelf illuminating a vase.

Image 1: Hafele Loox5 LED 2060 Strip Light installed in a wooden shelf, providing accent lighting for a vase.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di installare o utilizzare questo prodotto. La mancata osservanza di queste istruzioni può causare scosse elettriche, incendi o altri pericoli.

Scollegare l'alimentazione: Always ensure the power supply is disconnected before performing any installation, maintenance, or troubleshooting.
Voltage Compatibilità: This LED strip operates on 12V DC. Use only with a compatible 12V LED driver (not included). Connecting to a higher voltage danneggerà il prodotto.
Solo per uso interno: The product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not use in wet or damp posizioni.
Taglio: Only cut the LED strip at the designated cut marks (every 1 inch / 25 mm). Cutting in other areas will damage the circuit and render that section inoperable.
Dissipazione del calore: Ensure adequate ventilation around the LED strip. Do not cover the strip with materials that could trap heat.
Installazione professionale: In caso di dubbi su qualsiasi fase del processo di installazione, consultare un elettricista qualificato.
Nessuna parte riparabile dall'utente: Do not attempt to open or repair the LED strip. This will void the warranty.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti e integri al momento del disimballaggio:

1x Hafele Loox5 LED 2060 Strip Light (16.4 ft / 5m)
1x Lead Cable (approx. 2m / 78 3/4 inches)

Note: A compatible 12V LED driver is required for operation and is sold separately.

4. Configurazione e installazione

4.1 Preparazione

Superficie: Ensure the installation surface is clean, dry, smooth, and free of dust or grease.
Pianificazione: Plan the exact routing of the LED strip and the location of the 12V driver. Measure the required length of the strip.
Spegni: Disconnect power to the installation area before proceeding.

4.2 Taglio della striscia LED

The LED strip can be shortened to your desired length. Locate the designated cut marks, which occur every 1 inch (25 mm) along the strip. These marks are typically indicated by a copper pad and a scissor icon.

Using sharp scissors, carefully cut the strip precisely on the designated cut line.
Avvertimento: Do not cut the strip in any other location, as this will permanently damage the circuit.

Diagram showing how to cut the Hafele Loox5 LED 2060 Strip Light at designated 1-inch intervals.

Image 2: Diagram illustrating the correct cutting points (every 1 inch / 25 mm) on the LED strip. The diagram also shows the narrow 5mm width of the strip.

4.3 Montaggio della striscia LED

The LED strip features a self-adhesive backing for easy installation.

Carefully peel off a small section of the protective liner from the back of the LED strip.
Align the strip with your planned installation path and firmly press the exposed adhesive section onto the surface.
Continue to peel off the liner gradually while pressing the strip firmly along its entire length to ensure good adhesion.

4.4 Collegamento elettrico

Connect the LED strip to a compatible 12V LED driver (sold separately).

Connect the provided lead cable to the end of the LED strip. Ensure the connection is secure and the polarity (+ and -) is correct.
Connect the other end of the lead cable to the output terminals of your 12V LED driver. Again, observe correct polarity.
Connect the 12V LED driver to your main power supply according to the driver's specific installation instructions.
Importante: Ensure the 12V driver's wattage capacity is sufficient for the total length of the LED strip being used.

5. Istruzioni per l'uso

Once the Hafele Loox5 LED 2060 Strip Light is correctly installed and connected to a 12V LED driver, it can be operated.

Accensione/spegnimento: The light will turn on when power is supplied to the 12V driver. Use the switch or control mechanism associated with your driver to turn the light on or off.
dimming: This LED strip is dimmable. If your 12V driver and control system support dimming, you can adjust the light intensity using the compatible dimmer switch or control unit. Refer to the instructions provided with your dimming system for specific operation.

6. Manutenzione

The Hafele Loox5 LED 2060 Strip Light requires minimal maintenance.

Pulizia: To clean the LED strip, ensure power is disconnected. Gently wipe the surface with a dry, soft, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the strip.
Ispezione: Periodically inspect the strip for any signs of damage, wear, or loose connections. Ensure the adhesive backing remains secure.
Riparazioni: There are no user-serviceable parts inside the LED strip. Do not attempt to repair it yourself. If the strip is damaged, it should be replaced.

7. Risoluzione Dei Problemi

If you encounter issues with your LED strip light, refer to the following troubleshooting guide:

Problema	Possibile causa	Soluzione
La striscia LED non si accende.	No power to the 12V driver. Cablaggio errato o collegamenti allentati. Faulty 12V driver. Incorrectly cut LED strip.	Check power supply to the driver. Verify all connections (strip to lead, lead to driver) are secure and polarity is correct. Test the 12V driver with another compatible load if possible. Ensure the strip was cut only at designated marks.
LED strip flickers or is too dim.	Insufficient power from the 12V driver. Driver wattage capacity too low. Dimmer setting too low or incompatible dimmer.	Controllare l'input voltage to the driver. Ensure the driver's wattagla valutazione e supera il watt totaletage della striscia LED. Adjust dimmer setting. Confirm dimmer compatibility with 12V LED products.
Si illumina solo una parte della striscia LED.	Damage to the circuit in the unlit section. Incorrect cut.	The damaged section may need to be replaced or removed. Ensure cuts are made only at designated points.

If the problem persists after attempting these solutions, please contact Hafele customer support.

8. Specifiche

Detailed technical specifications for the Hafele Loox5 LED 2060 Strip Light:

Modello: Loox5 LED 2060
Voltage: 12 V CC
LED per metro: 120
Lunghezza totale: 16.4 piedi (5 m)
Larghezza: 3/16 pollici (5 mm)
Altezza: 1/16 pollici (1.3 mm)
Colore chiaro: Cool White 5000 K
Dimmerabile: SÌ
Indice di resa cromatica (CRI): >90
Tutta la vita: L80/B10 >50000 hours
Power Consumption per Meter: 4.8 L
Classe di efficienza energetica: A+
Codice IP: IP20 (solo per uso interno)
Cuttable Interval: Every 1 inch (25 mm)
Lunghezza cavo: 78 3/4 inches (2 m)
Certificazioni: Certificato UL
Materiale: Vinyl, Metal, PCB

8.1 Light Output Performance (5000K)

Chart showing light output in Lux at various distances for different color temperatures, including 5000K.

Image 3: Light output chart indicating Lux levels at different distances (250mm, 500mm, 750mm, 1000mm) for various color temperatures, including 5000K.

9. Garanzia e supporto

For detailed warranty information, product registration, or technical assistance, please visit the official Hafele website or contact Hafele customer service directly. Keep your purchase receipt as proof of purchase.

	Häfele Loox5: il sistema di illuminazione a LED per mobili e ambienti Explore the Häfele Loox5, an advanced LED lighting system designed for furniture and rooms. Discover linear lights, point lights, smart control options with Häfele Connect Mesh, and comprehensive technical specifications for creating illuminated spaces.
	Guida all'installazione del distributore Häfele Connect Mesh a 6 vie Guida all'installazione per il distributore Häfele Connect Mesh a 6 vie (modelli 850.00.042, 850.00.043), che descrive in dettaglio configurazione, specifiche, potenze nominali e informazioni sulla conformità per sistemi di illuminazione intelligenti.
	HÄFELE LOOX5: Sistema di illuminazione LED avanzato per mobili Scopri HÄFELE LOOX5, un sistema di illuminazione a LED versatile e intelligente per mobili. Scopri l'illuminazione lineare e puntuale, i comandi intelligenti e la perfetta integrazione per un design d'interni moderno.
	Häfele Loox5 LED Drivers Constant Voltage 12V/24V Installation Guide Comprehensive guide for installing Häfele Loox5 constant voltage LED drivers (12V/24V). Covers electrical safety, intended use, assembly, cleaning, maintenance, and troubleshooting. Includes technical specifications and multilingual instructions.
	Istruzioni di sicurezza e guida all'uso dei pomelli per mobili Häfele Precauzioni di sicurezza essenziali e linee guida per l'uso dei pomelli per mobili Häfele (modello 10611073), comprese avvertenze sulla sicurezza dei bambini e sull'imballaggio.
	Istruzioni di sicurezza e avvertenze per il prodotto Häfele 10290140 Istruzioni di sicurezza e avvertenze per il prodotto Häfele 10290140, che riguardano l'uso generale, le limitazioni per bambini e persone con capacità ridotte e i rischi di soffocamento derivanti dall'imballaggio. Include i dettagli del produttore.