Introduzione
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your BONTEC Monitor Wall Mount Arm. Please read this manual thoroughly before installation and retain it for future reference.
Informazioni sulla sicurezza
IMPORTANTI ISTRUZIONI DI SICUREZZA
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- Do not install on drywall alone. Always mount to a wood stud, concrete wall, or brick wall.
- Verify VESA compatibility and monitor weight capacity before installation.
- Utilizzare tutta la ferramenta fornita. Non sostituire parti.
- Adjust gas spring tension carefully according to monitor weight to prevent sudden movement.
- Tenere lontani bambini e animali domestici durante l'installazione.
- If you have any doubts about installation, consult a qualified professional.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Monitor Wall Mount Arm (GWM01)
- VESA Plate (Detachable)
- Kit di montaggio (viti, tasselli, rondelle)
- VESA Extension Brackets (for larger VESA patterns)
- Fermacavi
- Hex Keys for adjustments
Image: The BONTEC Monitor Wall Mount Arm, showing the main arm assembly, detachable VESA plate, VESA extension brackets, and cable ties.
Specifiche del prodotto
| Numero di modello | GWM01 |
| Marca | BONTEC |
| Tipo di montaggio | Montaggio a parete |
| Materiale | Metallo |
| Colore | Nero |
| Dimensioni dello schermo compatibili | 13-42 pollici |
| Capacità massima di peso | 19.8 libbre (9 kg) |
| Compatibilità VESA | 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm |
| Gamma di inclinazione | da -45° a +45° |
| Gamma girevole | 180° |
| Rotazione | 360° |
| Estensione da parete | Da 3.4 pollici (min) a 22.2 pollici (max) |
| Regolazione dell'altezza | 11.5 inches (vertical travel) |
| Dimensioni del prodotto | 22.2 x 3.94 x 3.43 pollici (piegato) |
| Peso dell'articolo | 4.69 libbre |
Image: Detailed diagram illustrating compatible VESA patterns (75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm) and the overall dimensions of the monitor arm, including minimum and maximum extension.
Image: A monitor mounted on the BONTEC wall arm, highlighting its universal compatibility with screens from 13 to 42 inches and a maximum weight capacity of 19.8 lbs.
Guida all'installazione
1. Choose Your Mounting Location
The BONTEC Monitor Wall Mount Arm is designed for installation on solid wood studs, concrete walls, or brick walls. NON installare solo su cartongesso.
Image: Illustrations of suitable wall types for installation: wood stud, concrete wall, and brick wall, with a warning against installing on drywall alone.
2. Fissare la piastra VESA al monitor
The VESA plate is detachable for easy installation. Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
Image: A six-step visual guide demonstrating the installation process, including attaching the VESA plate to the monitor, mounting the arm to the wall, and attaching the monitor to the arm.
3. Mount Arm to Wall
Using the provided template (if included) or by marking the drill holes, securely attach the wall mount arm to your chosen wall type. Ensure all screws are firmly anchored.
4. Attach Monitor to Arm
Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head. The top slots on the VESA plate make this process easier. Secure the monitor by tightening the safety screws.
5. Gestione dei cavi
Utilize the built-in cable management system and included cable clips to route and conceal your monitor cables for a tidy workspace.
Image: A monitor mounted on the wall arm, showcasing the integrated cable management system that helps keep cables organized and out of sight.
Funzionamento e regolazioni
The BONTEC Monitor Wall Mount Arm features a gas spring system for smooth and effortless adjustments, allowing you to customize your viewesperienza di acquisizione.
Regolazione della tensione della molla a gas
The gas spring counterbalance needs to be adjusted to the weight of your monitor. Use the provided hex key to turn the bolt:
- Turn clockwise for lighter screens (to reduce tension).
- Turn counter-clockwise for heavier screens (to increase tension).
Adjust until the monitor floats freely at any desired height.
Video: An official BONTEC video demonstrating the features and adjustments of the monitor wall mount, including tilt, swivel, rotation, and gas spring height adjustment. This video provides a comprehensive overview della funzionalità del prodotto.
Regolazione dell'altezza
The gas spring arm allows for approximately 11.5 inches of vertical height adjustment. Simply push or pull the monitor to your desired height.
Image: A visual representation of the monitor arm's vertical height adjustment capability, illustrating an 11.5-inch range of motion.
Inclinazione, rotazione e rotazione
The mount offers extensive flexibility for optimal viewangoli di inclinazione:
- Inclinazione: -45° to +45° (adjusts screen angle up or down).
- Girevole: 180° (moves screen left or right).
- Rotazione: 360° (allows for landscape or portrait orientation).
Image: A graphic illustrating the full motion capabilities of the monitor arm, including ±90° tilt, ±90° swivel, and 360° rotation.
Image: A monitor mounted on the wall arm, demonstrating its extension range from 3.4 inches to 22.2 inches, allowing for optimized workspace and viewdistanza.
Manutenzione
- Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano sempre ben serrati e sicuri.
- Pulisci il supporto con un panno morbido eamp stoffa. Evitare detergenti abrasivi.
- Do not attempt to disassemble the gas spring mechanism.
Risoluzione dei problemi
- Monitor does not stay at desired height or drifts down:
- The gas spring tension is too low for your monitor's weight. Increase the gas spring tension by turning the adjustment bolt counter-clockwise using the provided hex key.
- Monitor floats up too easily or does not stay down:
- The gas spring tension is too high for your monitor's weight. Decrease the gas spring tension by turning the adjustment bolt clockwise using the provided hex key.
- Mount feels unstable or wobbly:
- Ensure all wall mounting screws and VESA plate screws are securely tightened. Verify that the mount is installed on a suitable wall type (wood stud, concrete, or brick) and not just drywall.
- Cables are not neatly managed:
- Utilize the integrated cable management channels along the arm and the included cable clips to route and secure all cables.
Garanzia e assistenza clienti
For warranty information or technical support, please refer to the BONTEC official weboppure contatta direttamente il servizio clienti. Conserva la ricevuta d'acquisto come prova d'acquisto.
Visit the official BONTEC store: Negozio BONTEC
