Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aqua Master Men's 26mm Black Leather Gold Buckle Watch Band Strap. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch band.
Prodotto finitoview e componenti
The Aqua Master watch band is crafted from genuine leather and features a gold-tone buckle. It is designed for watches with a 26mm lug width.
Figure 1: Aqua Master 26mm Black Leather Watch Band with Gold Buckle. This image displays the watch band fully assembled, showcasing the black leather strap with white stitching and the gold-colored deployment buckle.
I componenti chiave includono:
- Long Band Section: The part of the strap with the buckle attached.
- Short Band Section: The part of the strap with the holes for adjustment.
- Deployment Buckle: The gold-tone clasp mechanism that secures the band.
- Spring Bars (not included with band): Small metal pins used to attach the band to the watch case.
Figure 2: Aqua Master 26mm Black Leather Watch Band laid flat. This image shows both sections of the watch band, the longer section with the buckle and the shorter section with the adjustment holes, laid out side-by-side.
Guida all'installazione (configurazione)
To attach the watch band to your watch, you will need a spring bar tool (not included) and the appropriate spring bars for your watch. Ensure your watch has a 26mm lug width.
- Prepara il tuo orologio: If there is an old band, carefully remove it by compressing the spring bars with a spring bar tool and pulling the band away from the watch lugs.
- Inserire le barre a molla nel nuovo cinturino: Slide one end of a spring bar into the small hole on one end of the watch band section.
- Allega il primo lato: Position the spring bar into one lug hole of your watch. Using the spring bar tool, compress the other end of the spring bar and guide it into the opposite lug hole. Release the tool slowly, ensuring the spring bar clicks securely into place. Gently tug on the band to confirm it is firmly attached.
- Ripetere per il secondo lato: Follow the same procedure for the other section of the watch band.
- Verifica connessione: Once both sections are attached, gently pull on each side of the band to ensure they are securely fastened to the watch case.
Operating the Deployment Buckle
The deployment buckle allows for easy and secure fastening of the watch band.
- Open the Buckle: Locate the small push-buttons on either side of the buckle. Press both buttons simultaneously to release the clasp and open the buckle.
- Regola la lunghezza: Slide the short band section through the buckle until you find a comfortable fit for your wrist. The buckle typically has a pin that inserts into one of the holes on the short band.
- Close the Buckle: Fold the clasp shut until it clicks securely into place. Ensure both sides of the clasp are fully engaged.
- Rimuovi orologio: To remove the watch, simply press the push-buttons again to release the clasp.
Manutenzione e cura
Proper care will extend the life and appearance of your leather watch band.
- Evitare l'esposizione all'acqua: Leather is susceptible to damage from water. Avoid prolonged exposure to water, sweat, and high humidity. If the band gets wet, gently wipe it dry with a soft cloth and allow it to air dry completely away from direct heat.
- Pulisci delicatamente: To clean, wipe the surface with a soft, dry, lint-free cloth. For deeper cleaning, use a specialized leather cleaner and conditioner sparingly, following the product's instructions.
- Evitare i prodotti chimici: Do not expose the leather to harsh chemicals, solvents, or abrasive materials, as these can damage the finish and integrity of the leather.
- Magazzinaggio: When not in use, store your watch in a cool, dry place, away from direct sunlight.
Figure 3: Underside of Aqua Master 26mm Black Leather Watch Band. This image shows the reverse side of the watch band, clearly displaying the "GENUINE LEATHER" stamp and the Aqua Master logo, confirming the material quality.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Band does not fit watch lugs. | Incorrect lug width. | Ensure your watch has a 26mm lug width. This band is specifically designed for 26mm lugs. |
| Buckle does not close securely. | Debris in clasp mechanism or misaligned components. | Inspect the buckle for any obstructions. Ensure both push-buttons are pressed evenly when opening and closing. |
| La pelle appare secca o screpolata. | Lack of conditioning or excessive exposure to elements. | Apply a small amount of quality leather conditioner. Avoid prolonged exposure to direct sunlight or extreme temperatures. |
Specifiche
- Modello: AM26a
- Larghezza ansa: 26mm
- Materiale: vera pelle
- Colore: Nero
- Tipo di fibbia: Gold-tone Deployment Buckle
- Short Band Length: Approximately 4.25 inches (including buckle)
- Long Band Length: Circa 5 pollici
- Compatibilità: Designed to fit Aqua Master watches and other watches with 26mm lug width.
Garanzia e supporto
For specific warranty information or product support, please refer to the original purchase documentation or contact Aqua Master customer service directly. Contact details are typically provided with your product packaging or on the official Aqua Master websito.
