Manuale utente del case per PC da gioco Mid Tower Fantech CG73

1. Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fantech CG73 Mid Tower Gaming PC Case. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and safety.

2. Informazioni sulla sicurezza

• Scollegare sempre l'alimentatore dalla presa a muro prima di installare o rimuovere qualsiasi componente all'interno del case del PC.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Tenere le parti di piccole dimensioni e i materiali di imballaggio fuori dalla portata dei bambini.
• Assicurare una corretta ventilazione attorno al case del PC per evitare il surriscaldamento.
• Do not expose the case to water or excessive humidity.
• The tempered glass panel is fragile; handle with extreme care to avoid breakage.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• Fantech CG73 Mid Tower Gaming PC Case
• 4 x Pre-installed RGB Fans
• Scatola degli accessori (viti, fascette, distanziatori, ecc.)
• Manuale dell'utente (questo documento)

4. Prodotto finitoview

Familiarize yourself with the key features and components of the Fantech CG73 PC case.

Figura 4.1: Davanti view of the Fantech CG73 Mid Tower Gaming PC Case, showcasing the hexagonal design and pre-installed RGB fans.

4.1 Fan Support and Cooling

The HEXA CG73 case supports up to 6 RGB fans, providing extreme heat transfer and vibrant RGB lighting. It comes with 4 pre-installed fans.

Figura 4.2: Interno view highlighting fan installation points: 1. Rear fan, 2. Top fans, 3. Front fans, 4. Bottom fans. The case includes 4 pre-installed fans.

4.2 Inner Structure and Motherboard Compatibility

The CG73 case is designed to accommodate various motherboard form factors and storage devices.

Figura 4.3: Internal layout showing support for ATX, Micro-ATX, and Mini-ITX motherboards, along with dedicated installation locations for 1 SSD and 1 HDD.

4.3 Component Clearance

Ensure your components fit within the case's maximum supported dimensions.

Figura 4.4: Component clearance specifications: Maximum GPU length of 300mm, maximum CPU cooler height of 165mm. Supports ATX, Mini-ITX, and Micro-ATX motherboards. Motherboard and GPU are not included.

4.4 Handy I/O Ports

The top-front panel provides convenient access to essential ports.

Figura 4.5: Top-front I/O panel featuring one USB 3.0 port and two USB 2.0 ports for direct access, along with audio jacks and power/reset buttons.

5. Configurazione e installazione

Follow these steps to install your PC components into the Fantech CG73 case.

1. Preparare il caso: Carefully remove the side panels. The tempered glass panel should be handled with extreme care.
2. Installa la scheda madre: Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case. Secure it with the provided screws.
3. Installare il dissipatore della CPU: If not already installed, mount your CPU cooler. Ensure it does not exceed the maximum height of 165mm.
4. Installa la scheda grafica (GPU): Insert your GPU into the appropriate PCIe slot on the motherboard. Ensure it does not exceed the maximum length of 300mm. Secure it with screws.
5. Installa unità di archiviazione:
   • SSD: Mount 2.5-inch SSDs in the designated SSD trays/mounts.
   • HDD: Mount 3.5-inch HDDs in the HDD cage.
   Secure all drives with the appropriate screws.
6. Install Power Supply (PSU): Slide your PSU into the dedicated compartment at the bottom of the case. Secure it with screws from the rear.
7. Gestione dei cavi: Route all power cables and data cables through the cable management cutouts to the back of the motherboard tray. Connect them to the respective components. Ensure fan and RGB cables are connected to the motherboard or a fan controller.
8. Reattach Panels: Once all components are installed and cables are managed, carefully reattach the side panels.

6. Istruzioni per l'uso

After assembly, connect your peripherals and power on your system.

• Accensione: Connect the power cable to your PSU and a wall outlet. Press the power button on the top-front I/O panel.
• Controllo RGB: The pre-installed RGB fans are typically controlled via your motherboard's RGB software (if connected to an RGB header) or a dedicated RGB controller (if included or purchased separately). Refer to your motherboard manual for specific RGB software instructions.
• Porte USB: Use the USB 3.0 and USB 2.0 ports on the top panel for connecting external devices.
• Jack audio: Connect your headphones and microphone to the audio jacks on the top panel.

7. Manutenzione

Regular maintenance helps ensure optimal performance and longevity of your PC case and components.

• Pulizia della polvere: Pulire periodicamente i filtri antipolvere (se presenti) e i componenti interni utilizzando aria compressa. Assicurarsi che il sistema sia spento e scollegato prima di procedere alla pulizia.
• Pulizia della ventola: Gently clean fan blades with a soft brush or compressed air to prevent dust buildup, which can impede airflow.
• Pulizia esterna: Pulisci l'esterno della custodia con un panno morbido eamp cloth. Avoid abrasive cleaners or solvents. For the tempered glass, use a glass cleaner and a microfiber cloth.
• Controllo della gestione dei cavi: Controllare di tanto in tanto il percorso dei cavi per assicurarsi che nessuno di essi ostruisca il flusso d'aria o il funzionamento della ventola.

8. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti incontrare.

9. Specifiche

10. Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale Fantech webo contattare il rivenditore locale. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Per ulteriore assistenza, visitare: www.fantechworld.com