Manuale utente del telecomando wireless sostitutivo Okin

1. Prodotto finitoview

This Okin Wireless Remote Control is designed as a replacement hand control for electric adjustable beds. It is specifically compatible with the RF.27.19.33 model and works seamlessly with various OKIN control boxes, including CB.13, CB.15, CB.23, CB.11, and CB.12.20 series. This remote provides intuitive control over your adjustable bed's functions, including position adjustments, massage features, and under-bed lighting.

Figure 1.1: Okin RF.27.19.33 Wireless Remote Control (Front)

Figure 1.2: Okin RF.27.19.33 Wireless Remote Control (Back)

Figure 1.3: Remote Control Label Detail (RF.27.19.33)

2. Configurazione e associazione

2.1 Installazione della batteria

Il telecomando richiede 2 batterie AAA (non incluse). Per installarlo:

1. Individuare il vano batterie sul retro del telecomando.
2. Far scorrere per aprire il coperchio della batteria.
3. Inserire 2 batterie AAA, assicurandosi della corretta polarità (+/-).
4. Chiudere bene il coperchio della batteria.

2.2 Processo di abbinamento

Before using the remote, it must be paired with your adjustable bed's control box. Ensure your bed is plugged into a power outlet.

1. Step 1: Prepare the Control Box

   Locate the control box under your bed base. Double-click the code pairing button on the control box. The indicator light on the control box will turn blue, and the under-bed light (if present) will flash. This indicates the control box is in matching code mode.

   

   Figure 2.1: Control Box Pairing Button
2. Passaggio 2: associare il telecomando

   Premere e tenere premuto il tasto PAIO button on the remote control. The backlight of the remote will flash, indicating it is in matching mode. Continue to hold the button until the backlight stops flashing and remains constantly on (or the under-bed light stops flashing and goes out). Keep the remote within 1 meter of the control box during this process.

   

   Figure 2.2: Remote Control PAIR Button

NOTA:

• If code matching is not completed within the allotted time, please repeat the above actions until successful.
• Upon successful pairing, the control box LED will turn green. If it turns off, pairing failed, and you should retry.
• Avoid electronic interference during the pairing process.

3. Istruzioni per l'uso

The Okin wireless remote control features an intuitive layout for easy operation of your adjustable bed. Key functions include:

• Position Adjustments: Independent control for head and foot sections (up/down arrows).
• Posizioni di memoria: Buttons for pre-set positions (e.g., ZG for Zero Gravity, TV for TV position, M for memory).
• Funzioni di massaggio: Dedicated buttons for massage intensity and duration (10min, 20min, 30min).
• Under-Bed Light: Button to control the under-bed lighting.
• Acceso/Spento: Power button for the remote.
• Timer: For setting sleep or massage timers.
• Modalità: To cycle through different massage modes or other settings.

The ergonomic design ensures comfortable handling, and the wireless operation eliminates tangled wires.

4. Manutenzione

• Cura della batteria: Remove batteries from the remote control if it will not be used for an extended period to prevent leakage.
• Pulizia: Clean the remote control with a soft, damp panno. Non utilizzare prodotti chimici aggressivi, detergenti abrasivi o solventi, poiché potrebbero danneggiare la superficie e i componenti interni.
• Magazzinaggio: Conservare il telecomando in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Durata: The remote is crafted from high-strength ABS plastic and is resistant to drops (tested up to 1.5m). However, avoid excessive force or impact.

5. Risoluzione Dei Problemi

If problems persist after following these steps, please contact Okin customer support.

6. Specifiche

• Numero modello: RF.27.19.33
• Compatibilità: Okin control boxes (CB.13, CB.15, CB.23, CB.11, CB.12.20 series), Lucid L600 adjustable beds. Not compatible with other brands or non-specified models.
• Fonte di energia: 2 batterie AAA (non incluse)
• Materiale: High-strength ABS plastic
• Colore: Bianco
• Peso dell'articolo: Circa 3.2 once (90.7 grammi)
• Dimensioni del prodotto: Circa 7 x 7 x 3 pollici (17.8 x 17.8 x 7.6 cm)
• Numero massimo di dispositivi supportati: 1
• Caratteristica speciale: Design ergonomico
• Paese di origine: Cina

7. Garanzia e supporto

7.1 Informazioni sulla garanzia

Specific warranty details for this replacement remote control are typically provided at the point of purchase or with the original product documentation. Please refer to your purchase receipt or contact the seller for warranty terms and conditions.

7.2 Assistenza clienti

For any unresolved issues, technical assistance, or inquiries regarding your Okin Wireless Remote Control, please contact Okin customer support. You can often find contact information on the official Okin websito o tramite il rivenditore presso cui hai acquistato il prodotto.

Risorse online: For additional information and support, you may visit the official Okin store on Amazon: Negozio Okin