Manuale utente delle luci di movimento FLINQ

Introduzione

Thank you for choosing the FLINQ Motion Lights. This 4-pack of LED motion sensor lights is designed to provide convenient and efficient lighting for various indoor spaces such as cabinets, wardrobes, bookshelves, and drawers. With their rechargeable battery and versatile installation options, these lights offer a practical solution for illuminating dark areas.

Please read this manual carefully before using the product to ensure proper operation and longevity.

Prodotto finitoview

FLINQ Motion Lights installed in a closet

The FLINQ Motion Lights provide bright, warm white illumination, perfect for enhancing visibility inside closets and other dark spaces. This image shows the lights discreetly installed within a wardrobe, highlighting their practical application.

This image displays the complete contents of the FLINQ Motion Lights 4-pack, including the four motion sensor lights, four USB charging cables, and adhesive mounting options. Everything needed for setup is provided.

Configurazione e installazione

Caricare le luci

Before first use, ensure the lights are fully charged. Each light is equipped with a rechargeable battery.

Locate the micro-USB charging port on the side of the light.
Connect the provided USB charging cable to the light and a compatible USB power source (e.g., computer USB port, USB wall adapter).
The indicator light will show charging status (e.g., red for charging, green/off for fully charged).
Una carica completa richiede in genere alcune ore.

Indietro view of FLINQ Motion Light showing USB port and switch

Dettagliato view of the back of a FLINQ Motion Light, highlighting the micro-USB charging port and the ON/OFF/AUTO switch for mode selection.

Opzioni di montaggio

The FLINQ Motion Lights offer three versatile installation methods:

Nastro adesivo:
Peel off the protective film from the 3M adhesive tape located on the back of the light. Press the light firmly onto a clean, dry, and smooth surface where you wish to install it. This method is ideal for permanent placement.
Piastra magnetica:
Attach the provided magnetic plate to the desired surface using its adhesive backing. The light can then be magnetically attached to this plate, allowing for easy removal for charging or repositioning.
The back of the FLINQ Motion Light, illustrating the integrated magnetic plate for easy attachment to metallic surfaces or the included adhesive magnetic disc.
ganci:
The lights can also be hung using small hooks if your installation area allows for it. This provides a flexible mounting solution.

Choose the method that best suits your needs and the surface where the light will be placed. Ensure the surface is clean and dry for optimal adhesion.

Istruzioni per l'uso

Selezione della modalità

Each FLINQ Motion Light has a switch on the back to select its operating mode:

SOPRA: The light will stay continuously on, regardless of motion or ambient light.
OFF: La luce rimarrà spenta.
AUTO (Motion Sensor Mode): This is the primary mode for motion detection.

Motion Sensor Functionality (AUTO Mode)

In AUTO mode, the light will activate based on motion and ambient light conditions:

The light is equipped with a sensitive motion sensor that detects movement within a range of 3-5 meters.
It also features a day/night sensor, meaning it will only activate in dark conditions when motion is detected.
Once motion is detected, the light will turn on automatically.
If no further motion is detected for approximately 25 seconds, the light will automatically turn off to conserve battery life.

FLINQ Motion Light illuminating a closet

The FLINQ Motion Light providing illumination inside a closet, demonstrating its motion-activated functionality in a practical setting.

FLINQ Motion Light on a wall next to a bed

A FLINQ Motion Light mounted on a wall, serving as a subtle night light or accent light in a bedroom environment.

Manutenzione

Pulizia

To maintain the appearance and functionality of your FLINQ Motion Lights, follow these cleaning guidelines:

Ensure the light is turned OFF before cleaning.
Pulire la superficie con un panno morbido, asciutto o leggermente damp stoffa.
Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the plastic material or electronic components.
Avoid getting water directly into the charging port or sensor area.

Cura della batteria

Per massimizzare la durata della batteria ricaricabile integrata:

Recharge the lights when the brightness noticeably diminishes.
Evitare di scaricare completamente la batteria frequentemente.
If storing the lights for an extended period, charge them to about 50% and recharge every few months to prevent deep discharge.
Do not expose the lights to extreme temperatures (hot or cold) as this can affect battery performance.

Risoluzione dei problemi

If you encounter issues with your FLINQ Motion Lights, please refer to the following common solutions:

Problema	Possibile causa/soluzione
La luce non si accende.	La batteria è scarica: Recharge the light using the provided USB cable. Modalità errata: Ensure the switch is set to "ON" or "AUTO". Ambient light is too bright (in AUTO mode): The sensor will prevent activation in well-lit environments. Test in a darker area.
La luce non rileva il movimento.	Ostruzione: Ensure the motion sensor is not blocked by objects. Distanza: You might be outside the detection range (3-5 meters). Move closer. La batteria è scarica: Ricarica la luce. Modalità errata: Ensure the switch is set to "AUTO".
La luce si spegne troppo velocemente o rimane accesa troppo a lungo.	Continuous motion: In AUTO mode, the light will reset its 25-second timer with each detected motion. Interferenza: Ensure there are no heat sources or air currents near the sensor that could trigger it. Modalità errata: If the light stays on continuously, check if the switch is set to "ON" instead of "AUTO".
La luce è fioca.	Batteria scarica: Ricarica la luce. Dust/dirt on lens: Gently clean the light's surface, especially the sensor area.

Specifiche

Caratteristica	Dettaglio
Marca	FLINQ
Nome del modello	Motion Lights 4-pack
Dimensioni (L x P x A)	Dimensioni: 8 x 8 x 2.8 cm
Peso per unità	100 grammi
Numero di articoli	4
Materiale	Plastica
Colore chiaro	Bianco caldo
Flusso luminoso	50 lumen
Caratteristiche speciali	Wireless, Motion Sensor, Rechargeable
Fonte di alimentazione	Battery Powered (Built-in Li-Polymer)
Capacità della batteria	3.7 V 600 mAh
Tipo di lampadina	LED (5 HQ SMD LED)
Intervallo di rilevamento del movimento	3-5 metri
Tempo di spegnimento automatico	25 secondi (dopo nessun movimento)
Durata	Circa 30,000 ore
Certificazione	CE

Garanzia e supporto

Informazioni sulla garanzia

Specific warranty details for your FLINQ Motion Lights may vary by region and retailer. Please refer to your purchase receipt or contact your point of sale for precise warranty terms and conditions.

Assistenza clienti

For further assistance, technical support, or inquiries regarding your FLINQ product, please contact FLINQ customer service:

E-mail: info@flinqproducts.nl
Websito: For more information and product updates, visit the official FLINQ websito.
You can also scan the QR code on the product packaging for additional information: https://qrco.de/bc0PUg

	Luci Halo ricaricabili FlinQ - Confezione da 3: Manuale utente e specifiche Manuale utente completo e specifiche tecniche per le luci Halo ricaricabili FlinQ (confezione da 3). Scopri di più su installazione, funzionamento, ricarica, risoluzione dei problemi e sicurezza.
	Faretti ricaricabili per interni FlinQ, confezione da 2 - Manuale di istruzioni Manuale di istruzioni per i faretti ricaricabili per interni FlinQ, confezione da 2 (FQC8500, FQC8501), che descrive in dettaglio caratteristiche, specifiche, installazione, ricarica, funzionamento a distanza e linee guida di sicurezza.
	Candele LED ricaricabili FLINQ FQC8240 con telecomando - Manuale utente Manuale d'uso per il set di candele LED ricaricabili FLINQ FQC8240 con telecomando. Scopri caratteristiche, funzionamento, ricarica, sicurezza e smaltimento.
	Manuale di istruzioni per candele LED da esterno FlinQ - FQC8416, FQC8417 Manuale di istruzioni completo per le candele LED da esterno FlinQ (FQC8416, FQC8417), che copre informazioni su sicurezza, specifiche, utilizzo, ricarica, telecomando, smaltimento e garanzia. Include istruzioni per l'installazione e il funzionamento.
	FlinQ LuxxTree Flagpole Light Chain User Manual and Setup Guide Official manual for the FlinQ LuxxTree Flagpole Light Chain. Learn how to set up, install, and use your decorative outdoor lighting with detailed instructions, safety guidelines, and mode explanations in multiple languages.
	FlinQ Wireless Lightning 250 LED - Instruction Manual and Specifications Comprehensive user manual for the FlinQ Wireless Lightning 250 LED string lights (Model FQC8167), including setup, operation, safety instructions, specifications, battery replacement, timer functions, disposal information, warranty, and EU declaration of conformity.

FLINQ Motion Lights 4-pack