Manuale utente di Creative Sound Blaster Audigy Fx V2 DBPro

1. Prodotto finitoview

The Creative Sound Blaster Audigy Fx V2 DBPro is an optional daughterboard expansion card designed to enhance the audio capabilities of your existing Sound Blaster Audigy Fx V2 sound card (sold separately). This expansion card provides significant upgrades to your PC's audio system.

• Enhanced Playback Resolution: Supports DSD256 playback, complementing the Sound Blaster Audigy Fx V2's 24-bit / 192 kHz audio resolution and 120 dB DNR.
• Suono surround 7.1 coinvolgente: Adds two additional side channels, upgrading your audio experience from 5.1 to a full 7.1 surround sound for richer, multi-directional audio.
• Connettività estesa: Features an additional optical-out port for connecting to external digital amplifiers and a side-out stereo output for 7.1 analog speaker systems.

Figure 1.1: The Creative Sound Blaster Audigy Fx V2 DBPro expansion card, featuring its compact design and ribbon cable connector.

2. Configurazione e installazione

This section provides instructions for physically installing the Sound Blaster Audigy Fx V2 DBPro expansion card into your computer and connecting it to the main Sound Blaster Audigy Fx V2 sound card.

2.1 Contenuto della confezione

Before proceeding with installation, ensure all items are present:

• Sound Blaster Audigy Fx V2 DBPro Expansion Card
• Opuscolo di avvio rapido

Note: The Sound Blaster Audigy Fx V2 main sound card is sold separately and is required for the DBPro to function.

2.2 Installazione hardware

1. Prepara il tuo computer: Power off your computer completely and disconnect all cables. Open the computer case to access the internal components.
   

   Figure 2.1: Open the computer case.

2. Locate the Main Card: Identify the installed Sound Blaster Audigy Fx V2 main sound card within your PC's PCI Express slot.
3. Connect the DBPro Card: Carefully connect the ribbon cable from the Sound Blaster Audigy Fx V2 DBPro expansion card to the designated connector on the main Sound Blaster Audigy Fx V2 card.
   

   Figure 2.2: The DBPro card and ribbon cable (left) and connecting the DBPro to the main Fx V2 card (right).
   

   Figure 2.3: The Sound Blaster Audigy Fx V2 DBPro connected to the main Sound Blaster Audigy Fx V2 sound card.

4. Install the Combined Cards: Secure the combined Sound Blaster Audigy Fx V2 and DBPro cards into an available PCI Express slot in your computer. Ensure both cards are properly seated and secured with their respective brackets.
   

   Figure 2.4: Installing the assembled sound cards into a PCI Express slot.

5. Chiudi caso e ricollega: Chiudere il case del computer, ricollegare tutti i cavi e accendere il computer.

2.3 Installazione del driver

After physical installation, you may need to install or update the drivers for your Sound Blaster Audigy Fx V2 and DBPro cards. Visit the official Creative webposto (us.creative.com) to download the latest drivers and software for your specific model (SB1870A).

3. Istruzioni per l'uso

The Sound Blaster Audigy Fx V2 DBPro enhances your audio experience through its advanced features. This section outlines how to utilize these capabilities.

3.1 Audio Port Overview

The DBPro card adds specific ports to your system. Refer to the diagram below for a comprehensive overview of the ports on both the main Audigy Fx V2 and the DBPro expansion card.

Figure 3.1: Audio ports on Sound Blaster Audigy Fx V2 and DBPro.

• Line-in port (Audigy Fx V2): For connecting mobile devices or MP3 players.
• Mic-in port (Audigy Fx V2): For connecting an external mono microphone.
• Headphone / Front (L / R) port (Audigy Fx V2): For 4-pole headsets, headphones, or front channels of stereo/5.1 analog speaker systems.
• Rear (L / R) port (Audigy Fx V2): For 7.1 analog speaker systems.
• Center / Subwoofer port (Audigy Fx V2): For 7.1 analog speaker systems.
• Side-out port (Audigy Fx V2 DBPro): Provides the additional side channels for 7.1 analog speaker systems.
• Optical-out port (Audigy Fx V2 DBPro): For connecting to speakers with optical-in or AV receivers.

3.2 DSD256 Playback

The DBPro card enables DSD256 playback, offering higher-resolution audio. To utilize this feature, ensure your audio playback software supports DSD files and that the appropriate output settings are selected within your operating system's sound configuration and the Creative audio control panel.

Figure 3.2: Experience enhanced playback resolution.

3.3 7.1 Suono surround

With the DBPro, your Sound Blaster Audigy Fx V2 system supports 7.1 discrete surround sound. Connect your 7.1 analog speaker system to the corresponding ports (Front, Rear, Center/Subwoofer on Fx V2, and Side-out on DBPro). Configure your audio settings in the Creative software to enable 7.1 surround output for an immersive experience in games and movies.

Figure 3.3: Immersive 7.1 surround sound for gaming.

3.4 Optical-Out Connectivity

The optical-out port on the DBPro allows for digital audio transmission to compatible devices such as external digital amplifiers or AV receivers. Use a TOSLINK optical cable to connect your system for high-quality digital audio output.

Figure 3.4: Additional optical-out port for expanded connectivity.

4. Manutenzione

To ensure optimal performance and longevity of your Sound Blaster Audigy Fx V2 DBPro, follow these general maintenance guidelines:

• Mantienilo pulito: Periodically clean the interior of your computer case to prevent dust buildup on the sound card. Use compressed air to gently remove dust from the card's components and connectors.
• Maneggiare con cura: When handling the card, always hold it by its edges and avoid touching the gold connectors or circuit board components.
• Aggiornamenti software: Controllare regolarmente la creatività website for driver and software updates to ensure compatibility and access to the latest features and performance improvements.

5. Risoluzione Dei Problemi

If you encounter issues with your Sound Blaster Audigy Fx V2 DBPro, consider the following troubleshooting steps:

• Nessuna uscita audio:
  • Verify that the DBPro card is securely connected to the main Audigy Fx V2 card and that both are properly seated in the PCI Express slot.
  • Controlla tutti i collegamenti dei cavi audio agli altoparlanti o alle cuffie.
  • Assicurati che nelle impostazioni audio del tuo sistema operativo sia selezionato il dispositivo di riproduzione corretto.
  • Confirm that the latest drivers are installed from the Creative websito.
• Incorrect Surround Sound (e.g., only Stereo):
  • Ensure your 7.1 analog speaker system is correctly connected to all required ports (Front, Rear, Center/Subwoofer, and Side-out).
  • Verify that 7.1 surround sound is enabled and configured in the Creative audio control panel and your operating system's sound settings.
  • If using the optical-out port, confirm that your external device (amplifier/receiver) is set to the correct input and decoding mode for surround sound. Some devices may require specific configuration for multi-channel audio over optical.
• DSD Playback Issues:
  • Ensure your media player software supports DSD file formats and is configured to output DSD audio.
  • Check the Creative audio control panel for DSD-specific settings.
• Installation Not Detected:
  • Re-check the physical connection of the ribbon cable between the DBPro and Fx V2 cards.
  • Ensure both cards are fully seated in their respective slots.
  • Try reinstalling the drivers.

For further assistance, please refer to the official Creative support resources on their websito.

6. Specifiche

7. Garanzia e supporto

For detailed information regarding the product warranty, please refer to the official Creative websito o sulla scheda di garanzia inclusa con l'acquisto. I termini e le condizioni della garanzia possono variare a seconda della regione.

For technical support, driver downloads, FAQs, and additional resources, please visit the Creative support page:us.creative.com/support/