1. Informazioni importanti sulla sicurezza
Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in laser radiation exposure or other hazards.
- Sicurezza laser: Do not point the laser directly into eyes. This product is a Class II laser device, with output power less than 1mW.
- Evitare l'esposizione diretta degli occhi al raggio laser.
- Non smontare il dispositivo. Le riparazioni devono essere eseguite solo da personale autorizzato.
- Tenere il dispositivo fuori dalla portata dei bambini.
2. Prodotto finitoview
The KAIWEETS KT360A is a 3x360 green line laser level designed for precise leveling and alignment tasks. It features high visibility green laser lines and self-leveling capabilities, making it suitable for various indoor and outdoor applications.
Image: The KAIWEETS KT360A laser level emitting bright green 360-degree lines.
Caratteristiche principali:
- 3 x 360° Green Laser Lines: One horizontal and two vertical lines provide full room coverage for floors, walls, and ceilings.
- Alta visibilità: Green laser technology offers 4 times better visibility compared to red lasers.
- Funzione autolivellante: Automatically levels within ±4° range.
- Modalità pulsazioni: Allows use with a laser detector (not included) for extended range up to 196ft/60m in bright conditions.
- Individual Line Control: Laser lines can be switched on and off independently.
- Accessori inclusi: Comes with a small adapter for fine adjustment and a telescopic tripod for versatile placement.
3. Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- Livello laser KAIWEETS KT360A
- Small Adapter (for fine adjustment)
- Telescopic Tripod (Max height 3.7m/12.18ft)
- Mounting Bracket with 1/4"-20 Mounting Thread and 5/8"-11 Thread Adapter (part of tripod kit)
- Manuale dell'utente (questo documento)
Image: Complete KAIWEETS KT360A kit, showing the laser level, adapter, and tripod components.
4. Impostazione
4.1 Installing the Laser Level
- Ensure the laser level is placed on a stable, level surface or mounted securely.
- The device can be mounted onto a tripod using its standard mounting thread.
- For fine adjustments, attach the laser level to the provided adapter.
Image: Demonstrates multiple ways of placing the laser level, including on a magnetic bracket and a tripod.
4.2 Montaggio del treppiede
- Aprire le gambe del treppiede ed estenderle fino all'altezza desiderata.
- Assemble the telescopic pole sections if using the full height.
- Attach the mounting bracket to the top of the pole.
- Secure the laser level to the mounting bracket using the 1/4"-20 thread. Use the 5/8"-11 thread adapter if necessary.
Image: The telescopic tripod components, including pole sections, base, and mounting bracket.
Image: The KAIWEETS KT360A laser level mounted on the telescopic tripod, projecting horizontal and vertical lines on a wall.
4.3 Using the Adapter for Fine Adjustment
The small adapter allows for precise positioning of the laser level.
- Attach the laser level to the adapter.
- Use the micro knob on the adapter to rotate the laser level 360° clockwise or counterclockwise for horizontal alignment.
- The adapter also provides X-axis and Y-axis adjustments for fine-tuning the laser line position within a 1 cm range.
Image: The small adapter for the laser level, showing its robust construction and adjustment knobs.
Image: The laser level mounted on the adapter, illustrating its 360-degree rotation, X-axis, and Y-axis fine adjustment capabilities.
5. Istruzioni per l'uso
5.1 Accensione/spegnimento e selezione della modalità
- Accensione: Slide the main switch to the "ON" position. The laser level will automatically enter self-leveling mode.
- Modalità autolivellante: When the pendulum is unlocked, the device will self-level. If the tilt angle exceeds 4°, the laser lines will flash rapidly to indicate an out-of-level condition.
- Manual Mode (Slope Mode): To use the device at an angle, lock the pendulum by sliding the main switch to the "OFF" position while the device is on. The laser lines will remain active but will not self-level, allowing for angled projections.
- Switching Laser Lines: Press the dedicated buttons on the control panel to cycle through horizontal and vertical laser lines independently.
- Modalità pulsazioni: Activate pulse mode for use with a laser detector in bright outdoor conditions. Refer to the device's specific button for pulse mode activation.
- Spegni: Slide the main switch to the "OFF" position to lock the pendulum and power off the device.
Image: The laser level in operation, projecting a horizontal line and two vertical lines, creating a 90-degree cross-section on the wall and floor.
6. Manutenzione
- Pulizia: Keep the laser level clean. Use a soft, damp panno per pulire l'esterno. Non utilizzare detergenti abrasivi o solventi.
- Cura delle lenti: Gently clean the laser output windows with a soft, lint-free cloth. Avoid scratching the lenses.
- Magazzinaggio: Store the device in its original carrying case in a dry, dust-free environment when not in use.
- Batteria: If the device uses removable batteries, remove them during long periods of storage to prevent leakage.
- Calibrazione: Regular calibration checks are recommended to ensure accuracy, especially after drops or impacts.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Le linee laser lampeggiano rapidamente. | Il dispositivo è fuori dal suo intervallo di autolivellamento (inclinazione >4°). | Place the laser level on a more level surface or adjust the tripod until the flashing stops. |
| Non compaiono linee laser. | Battery low or device not powered on. | Check battery level and replace/recharge if necessary. Ensure the power switch is in the "ON" position. |
| Laser lines are dim or difficult to see. | Bright ambient light or dirty laser output window. | Use in lower light conditions, activate pulse mode with a detector, or clean the laser window. |
| Le linee laser non sono dritte né precise. | Il dispositivo è in modalità manuale o necessita di calibrazione. | Ensure the pendulum is unlocked for self-leveling. If issues persist, contact customer support for calibration. |
8. Specifiche
- Modello: Modello KT360A
- Classe Laser: Classe II, <1mW
- Colore laser: Verde
- Linee laser: 3 x 360° (1 orizzontale, 2 verticali)
- Gamma autolivellante: ±4°
- Pulse Mode Range: Up to 196ft/60m (with detector, not included)
- Tripod Max Height: 3.7m / 12.18 piedi
- Regolazione dell'adattatore: 360° rotation, X/Y axis fine adjustment (within 1 cm)
9. Garanzia e supporto
KAIWEETS fornisce un Servizio post-vendita di 3 anni for the KT360A laser level kit.
For technical support, warranty claims, or any questions regarding your product, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.
Please have your model number (KT360A) and purchase information ready when contacting support.
