Manuali+

Artist Unknown QF-01

Artista sconosciuto Spruzzatore elettrico portatile per bidet (modello QF-01) - Manuale di istruzioni

Your guide to personal hygiene on the go.

1. Introduzione

Thank you for choosing the Artist Unknown Portable Electric Bidet Sprayer. This device is designed to provide a refreshing and thorough cleaning experience, enhancing personal hygiene whether you are at home, traveling, or camping. Its compact, foldable design and dual-pressure modes offer convenience and effectiveness. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Informazioni importanti sulla sicurezza

  • Do not immerse the main unit in water for extended periods, despite its waterproof rating.
  • Ensure the battery compartment is securely closed before use to prevent water ingress.
  • Use only clean water. Do not use hot water exceeding 122°F (50°C) as this may damage the device or cause burns.
  • Tenere fuori dalla portata dei bambini.
  • If the device malfunctions, discontinue use immediately and contact customer support.
  • Non tentare di smontare o riparare il dispositivo da soli.

3. Contenuto della confezione

Verifica che tutti gli articoli siano inclusi nel tuo pacco:

  • Portable Bidet Sprayer (Main Unit)
  • Riserva d'acqua
  • Manuale di istruzioni
  • Borsa da viaggio
  • USB Charging Cable (for rechargeable models, if applicable)

4. Prodotto finitoview

Familiarize yourself with the components of your portable bidet sprayer:

Diagram showing the components of the portable bidet sprayer, including twist knob, water inlet, exhaust port, battery compartment, and water reservoir.

Figure 1: Product Components (Function)

The bidet features a prism-shaped anti-skid design for comfortable handling and a 180-degree adjustable nozzle for precise cleaning. It is designed with IPX6 waterproof protection, featuring a dual-layer shell to prevent switch malfunction, auto power on/off, and battery damage.

Illustration of the bidet's IPX6 waterproof design, showing a dual-layer shell protecting internal components from water damage.

Figura 2: Design impermeabile IPX6

5. Istruzioni per l'installazione

Follow these steps to prepare your bidet for use:

  1. Installa le batterie:
    Locate the battery compartment. Pull up the knob of the battery cover and rotate counter-clockwise to open. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals are correctly aligned as indicated. Close the battery cover by rotating clockwise until secure. (Note: Batteries are not included.)

    Video 1: Guida all'installazione della batteria

  2. Riempire il serbatoio dell'acqua:
    Twist to unlock and pull out the water reservoir from the main unit. Fill the reservoir with clean water up to the 'MAX' scale mark (maximum 180mL). Do not exceed the maximum fill line.

    Video 2: Filling the Water Reservoir and Assembly

  3. Assemble the Bidet:
    Fix the bidet body to the filled water reservoir by aligning and twisting until secure.
  4. Regola l'ugello:
    Open the water pipe (nozzle) by rotating it 180 degrees into the operational position. The spraying nozzle can be rotated 180 degrees for optimal angle.

6. Istruzioni per l'uso

Your portable bidet offers two pressure modes for a personalized cleaning experience:

Image showing the two water pressure levels: Strong (150ML/Min for deep cleaning) and Soft (110ML/Min for sensitive spots).

Figure 3: Two Water Pressure Levels

  1. Accensione:
    Premere una volta il pulsante di accensione per accendere il dispositivo.
  2. Seleziona la modalità di pressione:
    The device has two-speed buttons: 'L' for gentle mode and 'H' for strong mode. Press the desired button to activate the spray.
  3. Pulizia:
    Direct the semi-circular spout towards the desired cleaning area. The 180-degree adjustable nozzle allows for accurate alignment and thorough cleaning without skin damage.
  4. Spegni:
    Press the power button again to turn off the device. The device also features an automatic shutoff function after 60 seconds of continuous use to conserve battery and water.

Video 3: Prodotto finitoview e funzionamento

7. Manutenzione

  • Pulizia:
    After each use, empty any remaining water from the reservoir. The device is IPX6 waterproof, allowing for direct washing under water. Ensure the nozzle is clean and free from debris.
  • Magazzinaggio:
    Once clean and dry, fold the nozzle back into its stored position. Store the bidet in the provided travel pouch to maintain its integrity and cleanliness.
  • Cura della batteria:
    Se il dispositivo non verrà utilizzato per un periodo prolungato, rimuovere le batterie per evitare perdite e danni.

8. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Il dispositivo non si accende.Le batterie sono scariche o installate in modo errato.Check battery alignment (+/-). Replace with fresh AAA batteries.
Pressione dell'acqua debole.Low battery power; insufficient water in reservoir; nozzle blockage.Replace batteries. Refill water reservoir. Check and clean the nozzle for any obstructions.
Perdita d'acqua.Reservoir not securely attached; damaged seal.Ensure the water reservoir is twisted tightly onto the main unit. Inspect seals for damage.

9. Specifiche

  • Numero modello: QF-01
  • Dimensioni: 9.7 x 4.33 x 2.16 pollici
  • Peso dell'articolo: 7.5 once
  • Materiale: Acrilonitrile Butadiene Stirene (ABS)
  • Water Pressure Modes: 2 (Gentle 'L', Strong 'H')
  • Ugello: regolabile a 180 gradi
  • Grado di impermeabilità: Grado di protezione IPX6
  • Fonte di energia: Batterie AAA (non incluse)

10. Garanzia e supporto

Questo prodotto viene fornito con un Garanzia di 1 anno. If you encounter any problems with your portable electric bidet sprayer, please do not hesitate to contact our customer support team. We are committed to providing a satisfactory solution.

For support, please refer to the contact information provided with your purchase or visit the official Artist Unknown store on Amazon.