1. Informazioni importanti sulla sicurezza
Please read these instructions carefully before installing or using the Artika Swirl Ribbon LED Flush Mount Ceiling Light. Retain this manual for future reference.
- Sicurezza elettrica: Always turn off the main power supply at the circuit breaker before beginning installation, maintenance, or cleaning. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
- Messa a terra: This fixture must be properly grounded to reduce the risk of electric shock.
- Fixture Handling: Handle the fixture with care. Do not apply excessive force to the LED ribbons.
- Dimmer: Use only LED-compatible dimmers as specified in the product specifications. Incompatible dimmers may cause flickering or damage to the fixture.
- Solo per uso interno: This fixture is designed for indoor use in dry locations. Do not expose to water or excessive moisture.
2. Cosa è incluso
Verificare che tutti i componenti siano presenti prima di procedere con l'installazione.
- Artika Swirl Ribbon LED Flush Mount Light Fixture
- Mounting Hardware (screws, wire connectors, mounting bracket)
- Manuale di istruzioni
Image: The Artika Swirl Ribbon LED Flush Mount Light Fixture, showing its integrated LED design.
3. Istruzioni per l'installazione
Follow these steps for safe and proper installation of your flush mount ceiling light.
- Spegnimento dell'alimentazione: Individuare l'interruttore automatico che controlla l'alimentazione dell'apparecchio di illuminazione e spegnerlo. Verificare che l'alimentazione sia interrotta utilizzando un voltmetro.tagetester.
- Rimuovere il vecchio apparecchio (se applicabile): Carefully remove any existing light fixture, disconnecting wires and removing the mounting bracket.
- Installare la staffa di montaggio: Attach the provided mounting bracket to the junction box in the ceiling using the screws. Ensure it is securely fastened.
- Connessioni dei cavi: Connect the fixture's wires to the household electrical wires. Match black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire connectors.
- Allega dispositivo: Carefully lift the light fixture and align it with the mounting bracket. Secure the fixture to the bracket using the provided screws. Ensure no wires are pinched.
- Ripristina alimentazione: Una volta installato saldamente l'apparecchio, riaccendere l'alimentazione tramite l'interruttore automatico.
Image: The Artika Swirl Ribbon light fixture installed on a ceiling in a bedroom setting.
4. Istruzioni per l'uso
The Artika Swirl Ribbon LED Flush Mount Light is designed for simple operation.
- Accensione/spegnimento: Per accendere o spegnere la lampada, utilizzare un interruttore a parete standard.
- Funzionalità di oscuramento: This fixture is dimmable. To utilize the dimming feature, ensure you have an LED-compatible dimmer switch installed. Adjust the dimmer switch to achieve your desired brightness level.
5. Manutenzione
Regular maintenance helps preserve the appearance and functionality of your light fixture.
- Pulizia: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
- Nessuna sostituzione della lampadina: This fixture features integrated LED lights, which are designed for long-term use and do not require bulb replacement.
6. Risoluzione Dei Problemi
If you experience issues with your light fixture, refer to the following common problems and solutions.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Nessuna alimentazione elettrica. Collegamento del filo allentato. Interruttore a parete difettoso. | Controllare l'interruttore di circuito. Assicurarsi che tutti i collegamenti dei cavi siano ben saldi (prima spegnere l'alimentazione). Prova l'interruttore a parete. |
| La luce tremola o si attenua in modo anomalo. | Interruttore dimmer incompatibile. Collegamento del filo allentato. | Ensure an LED-compatible dimmer is used. Controllare i collegamenti dei cavi (prima spegnere l'alimentazione). |
| La luce è troppo fioca o troppo intensa. | Impostazione dimmer. | Adjust the dimmer switch to your preferred brightness. |
If the issue persists after attempting these solutions, please contact Artika customer support.
7. Specifiche
Detailed technical specifications for the Artika Swirl Ribbon LED Flush Mount Ceiling Light.
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | FM-SR-BL |
| Consumo energetico | 28 Watt |
| Luminosità | 1400 lumen |
| Temperatura del colore | 3000 Kelvin (bianco caldo) |
| Materiale | Alluminio |
| Fine | Nero opaco |
| Dimensioni del prodotto | 19.69"L x 19.69"W x 7.87"H (50 cm L x 50 cm W x 20 cm H) |
| Vita media | 50,000 ore |
| Dimmerabile | Sì (con dimmer LED compatibile) |
| Tipo di installazione | Flush Mount |
| Voltage | 120 Volt |
| Uso interno/esterno | Al chiuso |
Image: The Artika Swirl Ribbon light fixture displaying its approximate dimensions of 50 cm (19.7 in) in width and 20 cm (7.9 in) in height.
8. Prodotto finitoview Video
Guarda questo video per un overview of Artika's product development and design philosophy.
Video: An official video from Artika showcasing their approach to product development and design, featuring various lighting fixtures.
9. Garanzia e supporto
For warranty information or technical support, please contact Artika customer service. Refer to your purchase documentation for specific warranty terms and conditions.
- Produttore: Artika for living inc
- Contatto: Please visit the official Artika website or refer to the contact information provided with your product packaging for support.